Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit
HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.
Properties:
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of
0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good
mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Grade:
HDPE pipe grade
HDPE injection grade, red, blue, green
HDPE blow grade, white, grey, black
HDPE coating grade
Film Grade
| Item | Test condition | Test Method | Value | Unit |
| Density | ISO 1183 | 0.944-0.955 | g/cm3 | |
| MFR | 190°C/2.16kg | ISO 1133 | 0.03-0.07 | g/10min |
| Tensile strength at yield | ISO 527-2 | 22 | MPa | |
| Elongation at break | ISO 527-2 | >350 | % | |
| ESCR | F50,50°C,100% | ASTM D-1693A | 1000 | h |
| VICAT | ASTM D-1525 | 126 | °C |
| Item | Test Condition | Test Method | Value | Unit |
| Density | ISO 1183 | 0.950~0.955 | g/cm | |
| MFR | 190°C/2.16kg | ISO 1133 | 1.7~2.5 | g/10min |
| Tensile strength at yield | ISO 527-2 | 24 | MPa | |
| Elongation at break | ISO 527-2 | >600 | % |
| Item | Test Condition | Test Method | Value | Unit |
| MFR | 190°C/2.16kg | ASTM D-1238 | 20 | g/10min |
| Density | --- | ASTM D-792 | 0.954 | g/cm3 |
| Tensile strength at yiled | --- | ASTM D-638 | 28 | MPa |
| Elongation at break | --- | ASTM D-638 | 250 | % |
| Impact tensile strength | --- | ASTM D-1822 | 42 | kJ/m2 |
| ESCR | ASTM D-1693 | 3 | --- | |
| VACIT | --- | ASTM D-1525 | 127 | °C |
Application
1). HDPE Film Grade
HDPE film grade is widely used in the production of T-shirt bags, shopping bags, food bags, garbage bags, packaging bags, industrial lining and multilayer film. Also used in beverage and medicine packaging, hot filling packaging and fresh produce packaging and anti-seepage film used in hydraulic engineering.
2). HDPE Blow Molding Grade
HDPE blow-molding grade can be used for producing smallsized containers such as milk bottles, juice bottles, cosmetics bottles, artificial butter cans, gear oil barrels and auto lubricant barrels. It can also be used in the production of intermediate bulk-containers(IBC), large toys, floating matters and large and medium-sized containers such as packaging-use barrels.
3). HDPE Filament Grade
The HDPE filament grade is suitable for making packaging film, nets, ropes and small and medium-sized containers
4). HDPE Injection Molding Grade
HDPE injection-molding grade is used for making reusable containers, such as beer cases, beverage cases, food cases, vegetable cases and egg cases and can also be used for making plastic trays, goods containers, home appliances, daily goods use and thin-wall food containers. It can also be used in the production of industrial-use barrels, garbage bins and toys. Through the extrusion and compression molding process and injection molding, it can be used to produce the caps of purified water, mineral water, tea beverage and juice beverage bottles..
1. Inner double plastic bags----25kg/Fiber drum (36*36*45cm, GW: 28kg, NW: 25kg);
2. Inner double plastic bags----5kg/Aluminum foil bag (GW: 6.5kg, NW: 5kg).
3. Inner double plastic bags----1kg/Aluminum foil bag (GW: 1.5kg, NW: 1kg).
Prompt delivery by Air Courier, like EMS,DHL,TNT,Fedex after payment confirmed.
Hebei Qiudu Technology CO., LTD specializes in exporting high quality Research chemical,Basic chemical and plastic raw material etc. Our products are produced on the basis of best technical team, advanced equipment, high qualified management which meet the requirements of security and environmental protection. We earned customer trust and created a good reputation during these years. We will provide the most comprehensive products and service to you ! We are looking forward to your cooperation! specializes in exporting high quality Research chemical,Basic chemical and plastic raw material etc.
Our Service
1) The professional sales reprensentative answers your inquiy on time;
2) We can provide reasonable price, high quality product and prompt shipmen;
3) We can send the goods to your delivery addreee directly, it is relatively safe and fast;
4) Warm sfter sale service, we will help to solve the problems in your usage.
1.How to place my order?
No matter sample order or bulk order, will draft an online contract with you via Alibaba Trade Assurance (free order protection service). Please contact us to place your order.
2.Where do you ship to?
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bot Making Machine is suitable for produccontainers and bottles in all shapes.
3.Is there any discount?
Yes, for larger quantities, we can offer you a better price.
4. How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment.
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
