Informasi dasar
Tidak. Model.
JH-9RGB14G45-S2B
Forward Voltage
Red:2.2-2.6V Green:3.0-3.4V Blue:3.0-3.4V
Paket Transportasi
kemasan antistatis
Deskripsi Produk
Product Uses
Typical Applications:
- Portable (flashlight, bicycle)
- Uplighters/ Downlighters
- Decorative/ Entertainment (stage light)
- Bollards/ Security/ Garden
- Indoor/ Outdoor Commerical and Residential Architectural
- Automotive Ext (Stop-Tail-Turn, CHMSL, Width Lamp)
Product Description
Full Spectrum High Power LED Color LED Chip LED Light Source Blue Green Red LED RGB PCB 3 Watts RGB LED
Features:
- Well-known chip material, Epileds
- 99.99% gold wire bonding
- Full-color spot, well color consistency
- Red-Green-Blue 3 colors in one package
- High flux per LED
- Low-temp & lead-free reflow soldering
- More energy efficient than incandescent and most halogen lamps
- Low voltage DC operated
- Instant light(less than 100ns)Emitter Mechanical DimensionsNotes:
1. The Anode side of the emitter is denoted by the "+" sign in the lead frame.
2. Electrical insulation between the case and the board is required. Do not electrically connect either the anode or cathode to the slug.
3. Drawing not to scale.
4. All dimensions are in millimeters.
5. Unless otherwise indicated, tolerances are ± 0.2mm.
6. Please do not solder this LED by manual soldering, otherwise it will damage the LED.
7. Please do not use a force impact or pressure on the lens of the LED, otherwise it will cause a catastrophic failure. | Part No. | Emitting Color | Color Wavelength | Luminous Flux(LM) | Forward Voltage(V) | Forward Current(mA) |
| JH-9RGB14G45-S2B | Red | 620-625nm | 130-140LM | 2.2-2.6V | 700mA |
| Green | 520-525nm | 200-210LM | 3.0-3.4V | 700mA |
| Blue | 460-465nm | 40-50LM | 3.0-3.4V | 700mA |
Flux Characteristics at 700mA, Temperature=25ºC | Radiation Pattern | Part Number | Color | Luminous Flux(LM) |
| Min | Max |
| Lambertian | JH-9RGB14G45-S2B | Red | 130LM | 140LM |
| Green | 200LM | 210LM |
| Blue | 40LM | 50LM |
- LEDGUHON maintains a tolerance of ±5% on flux measurements.
- Please do not drive at a rated current of more than 1 second without a proper heat sink.Optical Characteristics at 700mA, Tmeperature=25ºC | Color | Dominant Wavelength | Viewing Angle |
| Min | Mid | Max |
| Red | 620NM | 623NM | 625NM | 140° |
| Green | 520NM | 522NM | 525NM |
| Blue | 460NM | 462NM | 465NM |
- LEDGUHON maintains a tolerance of ±1nm for dominant wavelength measurements.Electrical Characteristics at 700mA, Temperature=25ºC | Color | Forward Voltage |
| Min | Mid | Max |
| Red | 2.2v | 2.4v | 2.6v |
| Green | 3.0V | 3.2V | 3.4V |
| Blue | 3.0V | 3.2V | 3.4V |
- LEDGUHON maintains a tolerance of ±0.1v for voltage measurements.Absolute Maximum Rating | Emitting Color | Red-Green-Blue |
| DC Forward Current | 700mA |
| Viewing Angle | 140° |
| Chip Wafer Material | AIGaInP+InGaN |
| Lens Color | Water Clear |
| Storage Temperature(ºC) | -35-85ºC |
| Operating Temperature(ºC) | -35-85ºC |
| LED Junction Temperature(ºC) | 120ºC |
| Working Lifespan | 30000-50000 Hours Normally |
Red-Green-Blue Color Spectrum Representation, Temperature=25ºCForward Current Characteristics, Temperature=25ºC1. Forward Voltage vs Forward Current2. Forward Current vs Normalized Relative Luminous FluxStorage
- Before opening the package, the LEDs should be kept at 30ºC or less and 70% RH or less.
- The LEDs should be used within one year.
- After opening the package, the LEDs should be kept at 30ºC or less and 30% RH or less.
- The LEDs should be used within one month after opening the package.
- If the moisture absorbent material (silicone) has faded away or the LED has exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5ºC for 48 hours.Static Electricity
- Static Electricity or surge voltage damages the High Power LED. It is recommended that a wristband or an anti-electrostatic glove should be used when handling the LEDs.
- A tip soldering iron is requested to be grounded, and an ionizer should also be installed where the risk of static.
- Any devices, equipment, and machinery must be properly grounded, it is recommended that measures be taken against surge voltage to the equipment that mounts the High Power LED.Cleaning
- Isopropyl Alcohol or Ethylene Alcohol is recommended in 5 minutes at room temperature. Do not use unspecified chemicals that may cause cracks or haze on the surface of the epoxy resin.
- Before cleaning, a pre-test should be done to confirm whether any damage to the LED will occur.
- Freon solvent should not be used to clean the LEDs because of worldwide regulations.Heat generation
- When the LEDs are illuminating, the operating current should be decided after considering the ambient maximum temperature.
- Please consider the heat generation of the LED when it is designed for the PCB.
- The LEDs must be mounted on a metal core PCB or heat sink or applied thermal pad.Handing LED
LEDGUHON recommends the following at all times when handing LEDs or assemblies containing these LEDs:
- When handing the LED with tools like Tweezer or Nipper, do not apply mechanical forces directly on the LED's surface.
- Do not touch with hand LED lens surface directly. It may contaminate the LED lens surface and affect optical characteristics.
- LEDs should be handed from the side because LED's molding material may be damaged by scratching on the surface, piercing molding material, and broking wire.Attention: Electric Static Discharge (ESD) ProtectionThe symbol is shown above herein to introduce "Electro-Optical-Characteristics". ESD protection for AIGaInP and InGaN-based chips is still necessary even though they are safe in low static-electric discharge. The material in AIGaInP and InGaN-based chips are STATIC SENSITIVE devices. ESD protection has to be considered and taken in the initial design stage. If manual work is needed, please ensure the device is well protected from ESD during the process. Product Real Show
Packaging & Shipping
Option 1 - Tube Packing
Notes:
1. Drawing not to scale.
2. All dimensions are in millimeters.
3. Unless otherwise indicated, tolerances are ±0.2mm.
- Please do not open the moisture barrier bag (MBB) for more than one week. This may cause the leads of LED discoloration. We recommend storing LEDGUHON LED in a dry box after opening the MBB. The recommended storage conditions are a temperature of 5-30ºC and humidity of less than 40% RH.Company Information
FAQ
1. Is there any discount for bulk orders?
Yes, if you need bulk orders or you want to customize products, we can provide wholesale prices.
2. How to place an order?
If you want to place an order, please feel free to send us an inquiry email, and we will reply to you within 24 hours (working day).
3. What payment terms are available?
T/T, Western Union, and PayPal are preferred.
4. Do you support drop shipping and how much does the shipping cost?
Yes, we support drop shipping. You should leave the receiver's information when you place the order, then we will send the goods according to the address you have left. The shipping cost is based on your order's volume and weight, and it can be calculated.
5. Are all the pictures real photos?
Yes, the pictures of all products on this page are 100% real shots by us.
6. How about the quality of 3 Watts RGB LED?
Please do not worry about the quality. Our company is the main manufacturer of 3 Watts RGB LED in China. Our products exported worldwide since the year 2009.
7. Is there any customs duty and import tax?
Due to the different policies in different countries, there might be some customs duties and import tax, which are not considered in the price and should be paid by yourself. We are not responsible for any custom duty and import tax.
Alamat:
Shop 301, Building 5, No. 9, Shizhong 3rd Road, Guankeng Village, Dashi Street, Panyu District, Guangzhou, Guangdong, China
Jenis Usaha:
Produsen/Pabrik, Perusahaan Perdagangan
Jangkauan Bisnis:
Lampu & Pencahayaan, Listrik & Elektronik
Sertifikasi Sistem Manajemen:
ISO 9001
Pengenalan Perusahaan:
Tentang kami:
Guangzhou Juhong Optoelektronik Co., Ltd., yang berlokasi di Guangzhou sebuah Flower City yang indah, berfokus pada riset dan pengembangan, produksi, penjualan dan pelayanan LED serta perusahaan teknologi tinggi.
Perusahaan kami didirikan pada tahun 2009. Produk kami terutama untuk LED Lampu, LED daya tinggi, LED CB, dan LED SMD. Menganjurkan kualitas adalah kehidupan perusahaan kita. Dan kami yakin pasar akan menentukan arah masa depan.
Visi perusahaan kita adalah untuk mengutamakan kepentingan pelanggan. Tujuan kami adalah membangun kemitraan yang saling menguntungkan. Tugas kami adalah menciptakan kesadaran akan perlindungan lingkungan dan penghematan energi. Dalam perkembangan selanjutnya dalam perjalanan perusahaan. Kami dengan senang hati akan menyediakan layanan berkualitas tinggi bagi pelanggan dan mencoba yang terbaik untuk menyediakan layanan yang efisien, menciptakan nilai-nilai bersama, menambah penghormatan pada industri LED, membagikan buah-buahan, dan menggabungkan kedua tangan.
Filosofi Bisnis:
Cahaya Drive masa Depan!
Indah dan indah, indah dalam masa indah!
Co-Create Infinite Value!
Misi perusahaan :
teknologi yang ringan secara ekologis! Mempertahankan "filosofi bisnis yang berorientasi pada orang, mengandalkan kreativitas, bekerja sama dan semangat perbaikan berkelanjutan, perusahaan kami menyediakan produk dan layanan berkualitas kepada pelanggan dan membangun perusahaan yang telah diakui secara internasional dan sangat baik.
Para karyawan kami terus-menerus belajar, mempelajari pengetahuan tingkat tinggi tentang ilmu pengetahuan dan teknologi, serta pengalaman manajemen yang luar biasa bagi industri nasional. Kita bekerja keras dan bekerja sama untuk masa depan perusahaan.