Color: | White |
---|---|
formulir: | kemungkinan kecil resin |
bahan kimia: | polybutlecie |
mode pemrosesan: | molding/ekstrusi injeksi |
uv: | fr. (fr) |
gunakan: | peralatan listrik, suku cadang otomatis, persediaan kantor |
Pemasok dengan izin usaha terverifikasi
Product Description | |||
PBT 3030-210XQ is a 30% glass fiber reinforced impact modified injection molding grade. | |||
General | |||
Form | Resin Pellets | ||
Filler | 30 % Glass Fiber | ||
Chemical Resistant Abrasion Resistant |
Good Thermal High Impact Good Electrical Properties Outdoor |
||
Physical | Nominal Value | Test Method | |
Density | 1.51 g/cm³ | ISO 1183 | |
Molding Shrinkage, Across Flow(1.6 mm) | 0.80 - 1.1 % | ISO 294-4 | |
Molding Shrinkage, Flow(1.6 mm) | 0.10 - 0.40 % | ISO 294-4 | |
Mechanical | Nominal Value | Test Method | |
Tensile Modulus | 8000 MPa | ISO 527-1 | |
Tensile Stress | 115 MPa | ISO 527-2 | |
Tensile Strain, Break | 2.8 % | ISO 527-2 | |
Flexural Modulus | 6400 MPa | ISO 178 | |
Flexural Stress | 170 MPa | ISO 178 | |
Charpy Notched Impact Strength(23 °C) | 12 kJ/m² | ISO 179 | |
Charpy Unnotched Impact Strength(23 °C) | 55 kJ/m² | ISO 179 | |
Notched Izod Impact Strength(23 °C) | 11 kJ/m² | ISO 180 | |
Unnotched Izod Impact Strength(23 °C) | 45 kJ/m² | ISO 180 | |
Thermal | Nominal Value | Test Method | |
Deflection Temperature Under Load, Unannealed 0.45 MPa 1.8 MPa |
210 °C 200 °C |
ISO 75-2/B ISO 75-2/A |
|
Melting Temperature | 225 °C | DSC | |
Flame Rating(0.8 mm) | HB | UL 94 | |
Electrical | Nominal Value | Test Method | |
Surface Resistivity | 1.0E+12 ohms | IEC 60093 | |
Volume Resistivity | 1.0e+14 ohms·cm | IEC 60093 | |
Electric Strength(2 mm) | 22 kV/mm | IEC 60243-1 | |
Arc Resistance | 100 sec | UL 746 |
Processing | Nominal Value |
Middle Temperature<injection> | 235 - 270 °C |
Nozzle Temperature<Injection> | 240 - 265 °C |
Mold Temperature<Injection> | 40 - 120 °C |
Injection Pressure<Injection> | 49.0 - 118 MPa |
Injection Rate<Injection> | Moderate - Fast |
Holding Pressure<Injection> | 29.4 - 78.5 MPa |
Back Pressure<Injection> | 0.00 - 0.294 MPa |
Screw Speed<Injection> | 60 - 120 rpm |