1. product description
(1) summery
KYN61-40.5 (Z) type key mounted open AC metal closed switchgear (hereinafter referred to as the "switchgear") it is applicable to the three-phase AC 50Hz power system, used for the power distribution rooms of power plants, substations and industrial and mining enterprises to accept and distribute electricity, and to control, protect and monitor the circuit.
This product meets the standard: GB3906<3-35kV AC Metal Closed Switchgear>, GB / T11022 <Standard Common Technical Requirements for HP Switchgear and Control Equipment>, IEC60298 <Rated voltage above 1kV and below 50kV AC is all closed switchgear and control equipment>.
(2)Conditions of use
1.Ambient air temperature: maximum temperature +40ºC. Minimum temperature -10ºC;
2. Altitude: <1000m;
3. Surrounding relative humidity: daily average <95%, monthly average < 90%:
4. Ambient air: not suitable for degree, serious pollution, flammable gas and violent vibration places;
5.If there is an earthquake, the earthquake intensity should not exceed 8.
(3)Structural characteristics
Switch cabinet structure GB3906-2006 and IEC298 pin installed metal closed switch equipment standard and design, the whole by the cabinet body and can be drawn out of the part (handcart) two grades. Cabinet structure is assembled type, bolted combination forming, with complete partition board will switch cabinet inside part of the circuit breaker room, main bus room, cable room and relay instrument room. The outer hulk protection grade is IP3X, and the protection grade of each compartment is IP2X. All structural components are reliably grounded. The compartment of the main loop system has an independent exhaust pressure release channel.
According to the use of handcart can be divided into circuit breaker handcart, voltage transformer handcart, measuring handcart, isolation handcart, etc., all kinds of handcart the same size, the same use of handcart has good interchangeability; The handcart has a test/isolation position and a working position in the cabinet, and each position is equipped with an interlocking device to ensure that the handcart cannot move freely when it is in the above two positions.
| 2.Technical parameters of circuit breaker |
| KYN28A Main technical parameters of switch equipment |
| rated voltage |
KV |
24 |
| Rated frequency |
HZ |
50/60 |
| Rated current |
A |
63,012,501,600,200,000,000,000 |
Rated short-circuit breaking current
|
KA |
20 |
31.5 |
| Rated short circuit closing current (peak value) |
KA |
50 |
80 |
| Rated short-time withstand current (4s) |
KA |
20 |
31.5 |
| Rated peak tolerance current |
KA |
50 |
80 |
| Rated voltage of auxiliary control loop |
V |
Direct current or alternating current110/220 |
| Protection grade |
|
IP4X |
| Dimensions (WIDTH * depth * height) |
mm |
800*1810*2380 |
1000*1810*2380 |
| weight |
kg |
840-1440 |
3. company profile:
Shenheng Electric Power Equipment Co., Ltd. is one of the enterprises specializing in the production of high-voltage and low-voltage switchgear transmission and distribution equipment and high-voltage and low-voltage electrical components, and the production of fully insulated and fully sealed inflatable cabinet intelligent solid insulation ring main unit outdoor high-voltage cable branch box type substation and other products are stable and reliable, trusted and recognized by users The main products are YBW box-type substation KYN61-40.5KYN28A-24 KYN28A-12 XGN2-10 HXGN-10 high voltage switch cabinet XGN ring network cabinet SHSRM pneumatic ring network cabinet SHSG solid ring network cabinet machine group MNS GCS GCS GGD XL low voltage switch cabinet Vacuum circuit breaker oil-immersed transformer dry transformer current/potential transformer load switch and other power transmission and distribution equipment for a long time for all kinds of metallurgy, ships, power mines, intelligent buildings, high-rise buildings, hospitals, schools and other industries to provide high-quality power transmission and distribution equipment and electrical control equipment. The company has strong technical force, sophisticated technology, sophisticated detection means, products sold throughout the country.
4.Company Workshop
5.certifications
6.Contact Us
Please feel free to contact us with any questions you may have.
FAQ
Q1 . Are you a trading company or a manufacturer?
We are a professional factory with 10 years experience in the field of high and low voltage switchgear, substation, transformer, cable distribution box and various electrical equipment (such as vacuum circuit breakers, load switches, etc.). Our factory is the national outstanding supplier of China power grid corporation.
Q2. Do you accept custom service?
We offer OEM/ODM service to print your logo on products. Our professional technical and quotation team can provide satisfactory projects according to your drawings and parameters.
Q3. What's your minimum order quantity?
Our minimum order quantity is 1 piece.
Q4. What's your delivery time?
It depends on your product requirements and quantity. Generally 5~10 working days can.
Q5. How to solve the quality problem?
Please provide detailed photos of quality problems. Our technical and quality inspection departments will analyze it. We will make a satisfactory solution within 2 days.
Q6. What are your terms of payment?
30%T/T in advance, 70% before delivery. Western Union, L/C is also acceptable.
Pemasok yang Diaudit 
