Support Custom-Made Thiourea Dioxide High-Efficiency Boiling Drier

• Mode Pemanasan: Electricity, Steam, Natural Gas
• Status Material: Ferrule, Bubuk, Krim, Curah
• Pengeringan sedang: Udara
• Tekanan Pengoperasian: Negative Pressure
• Struktur: Lapisan Tunggal
• Metode Operasional: Terputus-putus
• Tidak. Model.: GFG
• Tipe: Silinder
• berat bersih: sesuai dengan persyaratan desain
• model: seri gfg
• tujuan: Medicine, Chemicals, Food
• tempat produksi: Jiangsu Changzhou
• Paket Transportasi: Manual Operation
• Spesifikasi: 2000X2000X3500
• Merek Dagang: YUANZE
• Asal: China
• Kode HS: 2901100000
• Kapasitas Produksi: 200

Deskripsi Produk

Overview:
High efficiency boiling drier is used for boiling drying of granular materials with particle size of 0.1-6mm. It is suitable for drying of finished products and intermediates in pharmaceutical, food, light industry and chemical industry. Working principle, natural air in the fan under the suction, through the purification cabinet, heater, in the material bed plate hole in the formation of high-speed airflow, and make the material boiling state, in the gas-solid two-phase contact process of large-scale evaporation of water in the material, so as to achieve drying.
 

Scope of application:
1.Drying of wet granules and powdery materials in the fields of medicine, food, feed and chemical industry.
2.Screw extrusion particles, rolling particles, high-speed mixing granulation particles.
3.Large particle, small block, viscous bulk material.
4.The material of volume change during drying, such as Taro, wall acrylamide, etc.

 

Features:
1.Airtight negative pressure operation, air flow through the filter. Easy to operate, easy to clean, is in line with the"GMP"

2.The drying speed is fast, the temperature is even, each batch drying time is in 20-30 minutes.

3.The Hopper is arranged with agitation to avoid the agglomeration of wet materials and the formation of furrow flow during drying.

4.It adopts tipping and unloading, which is convenient, rapid and complete. It can also design the automatic feeding and discharging system according to the requirement.

5.The fluidized bed has a circular structure to avoid dead angle.

6.This machine can also be designed and manufactured according to the requirements of automatic feeding and discharging.

Principle:
After the air is heated and purified, the air is introduced by the induced draft fan from the lower part and passes through the mesh plate of the hopper. In the working room, the fluid is formed by stirring and negative pressure. The water evaporates quickly and is carried away with the exhaust, and the material is quickly dried.

Technical Parameters:

Item		Unit	Type
Capacity		Kg	60	100	120	150	200	300	500	1000
Fan	Velocity	m3/h	2361	3488	4000	4901	6032	7800	10800	1500
	Air Pressure	mmH2O	594	533	533	679	787	950	950	1200
	Power	kw	7.5	11	11	15	22	30	37	75
Stirring Power		kw	0.4	0.55	0.55	1.1	1.1	1.1	1.5	2.2
Stirring Speed		rpm	11
Consume of steam		kg/h	141	170	170	240	282	366	451	800
Time of operation		min	15-30(depend on material)
Height of mainmachine		mm	2700	2900	2900	2900	3100	3600	3850	5800

Type		Unit	3	5	30	60	120	200	300	500	1000
Item
Container of raw material	Dim	mm	300	400	700	1000	1200	1400	1600	1800	2200
	Volume	L	12	22	100	220	420	670	1000	1500	2500
Production capacity	Min	kg/batch	1.6	4	15	30	80	100	150	250	500
	Max	kg/batch	4	6	36	72	140	240	360	600	1100
Consume of steam		kg/batch	12	23	70	140	211	282	366	465	800
Amount of compressed air		m3/min	0.3	0.3	0.3	0.6	0.6	0.9	1.1	1.6	1.5
Pwer of fan		kw	2.2	4	5.5	11	18.5	22	30	45	75
Temperature		ºC	adjustable from ambient to 120
Yield		%	>99
Option time		min	15-30(depend on material)
Content at final term		%	0.2(depend on material)
Noise		dB	≤75
Height of mainmachine		mm	2100	2300	2500	3000	3300	3800	4000	4800	6200