Jendela Rana (RSW-004)

Shutter Window Specification:

-Material
RRSW Model Built In, Double skin foam filled aluminium slat, vented as standard but also available non-vented.
-Common use
Domestic / Commercial Windows, Doors, Survery & Cabinets
-Maximun Width
3400mm
-Dimensions
Norminally 37mm by 9mm thick
-Weight
4.5kg per square meter
-Finsh
White, brown, cream or wood grain effect, Bottom salt-white, dark brown
-Shutter Box
Roller formed aluminium in two sections; Tip and bottom boxes
Bottom box removable for installation and maintenance and Chamfered at 45 degree
The shutter box is assembled on die cast aluminium endplates.
-Guide Rail
Extruded aluminium with an intergral box section for reinforcement and to facilitate fixing. High density pile brush seals for quiet and smooth operation.
-Operational
A. Rod Crank Operation
For shutters up to 10kg and 25kg
Incorporate a geared rod crank handle 1500mm long which hangs vertically and secures into a clip not in use. The gear is installed in the box, the gear ratio varies with shutter weight.
B. Pulley Belt Winder
For shutter up to 15kg
The pulley coils the blet when it is pulled to open the shutter
The belt is 14mm and grey in color. External shutters are supplied with a guide tube to protect the belt through the building wall
C. Geared Belt Winder
For shutter between 15kg to 25kg.
1: 3 ratio with removable handle for belt operated shutter
D. Single Phase Electric
Provision of a 13 amp fused spur is required for installation
Atubular motor within the barrel assenbly with limit switches and the thermal cut out to prevent overheating.
Draw 220volts and 0.5-2.5 AMPS dependant upon the shutter size
Control
Standard security keyswitch or rocker switch. Other controls are available on request.