What is RO System?
The reverse osmosis equipment adopts the osmosis filtration process of reverse osmosis membrane, which is a modern new pure water treatment technology.Reverse osmosis membrane by means of choice through (through) membrane function to pressure as the driving force of membrane separation technology, when system and the pressure is greater than in the aqueous solution of osmotic pressure, the water molecules through the membrane unceasingly, after producing water flows into the central tube, and then out in the end the impurities in the water, such as ion, organic matters, such as bacteria, viruses, interception on the inlet side of the membrane, and then in the thick water outflow water end, so as to achieve separation and purification.
What is EDI system?
Electrodeionization is a water treatment technology that utilizes an electricity, ion exchange membranes and resin to deionize water and separate dissolved ions (impurities) from water. It differs from other water purification technologies in that it is done without the use of chemical treatments and is usually a polishing treatment to reverse osmosis (RO). There are also EDI units that are often referred to as continuous electrodeionization (CEDI) since the electric current regenerates the resin mass continuously. CEDI technique can achieve very high purity, with conductivity below 0.1 µS/cm.
Working process of EDI system:
Raw water(inlet water) → raw water tank → feed pump → sand filter → activated carbon filter → cartridge filter,precision filter → high pressure pump →RO unit → pure water tank → (UV light sterilizer or ozone sterilizer) use
Raw water(inlet water) → raw water tank → feed pump → sand filter → activated carbon filter → cartridge filter,precision filter → high pressure pump →Stage I RO unit → Stage II RO unit →middle water tank → EDI system → polished mixing bed → pure water tank → (UV light sterilizer or ozone sterilizer) use
Application scope of equipment:
water stores,beverage bottlting,spot free make-up water,boiler feed
car wash,hydroponics,window and solar panel washing
manufacturing process
potable water from wells,pharmaceutical makeup,cosmetic product feed water,food manufacturing,coffee makeup
Detail images:
Product parameter:
| Water volume(L/H) |
100L |
300L |
500L |
1000L |
2000L |
3000L |
4000L |
5000L |
| Product water resistivity( MΩ·cm) |
≥15 |
≥15 |
≥15 |
≥15 |
≥15 |
≥15 |
≥15 |
≥15 |
| Operating Voltage(V) |
35-45 |
55-65 |
50-80 |
80-100 |
100-150 |
150-200 |
200-350 |
200-350 |
| Electric current(A) |
2.0-2.5 |
2.0-2.5 |
2.0-2.5 |
2.0-2.5 |
2.0-2.5 |
2.0-2.5 |
2.0-2.5 |
2.0-2.5 |
Packing:
Our packaging is a wooden frame. The packaging is sealed and transported to the port by special vehicles to ensure product safety and quality
FAQ:
Q: Are you a factory or trading company?
A: We are factory producing water treatment equipment and have been set up for 8 years.
Q: Where is your factory?
A: Our factory is located in Dagang Town, Nansha District, Guangzhou, which is close to Nansha port and Pazhou. Warmly welcome to visit our showroom and factory.
Q: What range of product do you manufacture?
A: RO system, EDI system, UF system, Sewage water treatment and related accessories.
Q: Is OEM acceptable?
A: Yes, OEM is acceptable. We could produce as per your specific requirement.
Q: How to place order?
A: Send us requirement and inquiry--Get quotation--Confirm the order and PI--Arrange the deposit--Start the production and keep communication--video or photo inspection before loading--Arrange the balance before delivery--Arrange delivery.
Q: What information is needed before quotation?
A1. The quality of the water resource. Any water test report is appreciated.
A2: What is the required output capacity per hour?
A3: What is the application using the equipment?
Want to know more, contact us as soon as possible!
Pemasok yang Diaudit 
Pemasok yang Diaudit 
