Penjualan panas 8 inci 8040 konsumsi Energi Rendah RO Mundur Membran osmos untuk Sistem Filter Air Perbut industri sebagai pemurni Dispenser kualitas baik

• Membrane Type: Spiral
• Type: RO
• penolakan garam: 99.0%
• flux (fluks: 12650 GDP
• ukuran: 8 inci
• rentang kehidupan: 2-3 tahun
• Tidak. Model.: BW8040-440XLE
• tekanan pengoperasian maksimum: 600 Psi
• temperatur kerja maksimum: 45
• umpan maksimum sdi(sdi15): 5.0
• Paket Transportasi: Standard Export Package
• Spesifikasi: 110cm× 26cm× 22cm
• Merek Dagang: UltraClean or Customized
• Asal: China
• Kode HS: 8421999090
• Kapasitas Produksi: 150000PCS/Year

Deskripsi Produk

UltraClean XLE series reverse osmosis membranes change the surface properties and chemical properties of the membrane by changing the formulation and production process conditions of the bottom membrane and composite membrane, improving the specific surface area and hydrophilicity, and maximizing the membrane flux. It is suitable for municipal water treatment. It is one of the reverse osmosis membrane elements with the highest water production and the lowest operating pressure in the membrane industry. The total cost of assembling the system with this element is the lowest, which can greatly improve the operating economy of the reverse osmosis system. as the most. A new generation of ultra-low energy consumption and high-performance reverse osmosis membrane elements, its operating pressure is about 1/2 that of ordinary brackish water reverse osmosis membrane elements, and the desalination rate can reach 99%. The ultra-low energy series is available in 8-inch and 4-inch sizes.


Product  Highlights

1.Has very high water flux and very low operating pressure
2.It can greatly reduce the energy consumption of the membrane system, while taking into account the desalination rate


Membrane Specification


 

A inch(mm)	B inch(mm)	C inch(mm)
40 (1016)	1.125 (29)	7.9 (201)

Performance Specification
 

Effective Membrane Area ft²(m²)	Stablized Rejection Rate(%)	Minimum Rejection rate(%)	Flux gpd(m³/d)
440 (41)	99.0	98.0	12650 (48)

Test conditions: inlet pressure 0.69 MPa (100 psi); inlet temperature 25°C (77°F); inlet water quality 500ppm NaCl; inlet pH 8; recovery 15%.



Operating and Cleaning Limits
 

Maximum operating temperature                                                                                                                                                                                         113 ºF (45ºC)

Maximum operating pressure                                                                                                                                      600 psi (41 bar)

Maximum pressure drop                                                                                                                                                                                                        15 psi (1.0 bar)

pH range

Continuous operation                                                                                                                                                                              2 - 11

Short cleaning (30 minutes)                                                                                                                                                                                                                     1 - 13

Maximum Influent Sludge Density Index SDI                                                                                                                                             5

Free chlorine tolerance                                                                                                                                                                   < 0.1 ppm

Permeate flow for individual elements may vary ±15 percent from the value specifed.
Active membrane area guaranteed ±4%.
Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.

Company Profile

About Us

Production Line

Our Advantages

Why Choose UltraClean

After Sales Service

Delivery Package

FAQ

 

1.Are you a manufactuere or trading company?

We are 100% manufacturer of RO and NF membranes which could help you get products with best quality and price from factory directly.

3.Where is your company factory?

Our Production Headquarter located in New Material Industrial Park, High-tech Zone, Ankang City, Shaanxi Province. Besides, our marketing center is located in Tiancheng Building, Xiangcheng District, Suzhou city, Jiangsu Province. The second factory here is now under construction, will be finished next year, welcome to visit!

2.How is the quality of your products?

We promise three-years quality warranty and will implement it in the form of a contract.

4.Do you support sample order?

Yes, we always support free sample to help our clients check the quality, but we do not bear the shipping cost.

5.Do you support OEM?

Yes, we support OEM service and welcome you to customize our products.

6.How long time usually your products to ship?

15 to 30 days, depend on the distance.