Membran Osmosis Balik Air Laut 8040 untuk proses pemurnian Sistem RO Harga terbaik

• Tipe Membran: Spiral
• Tipe: RO
• penolakan garam: 99.8%
• flux (fluks: 6700 gdp
• ukuran: 8 inci
• rentang kehidupan: 2-3 tahun
• Tidak. Model.: SW8040-365HRFR/34
• tekanan pengoperasian maksimum: 12000 psi
• temperatur kerja maksimum: 45 derajat celcius
• umpan maksimum sdi(sdi15): 5.0
• Paket Transportasi: Standard Export Package
• Spesifikasi: 110cm× 26cm× 22cm
• Merek Dagang: UltraClean or Customized
• Asal: China
• Kode HS: 8421999090
• Kapasitas Produksi: 150000PCS/Year

Deskripsi Produk

UltraClean SW series special reverse osmosis membrane element for seawater desalination is a high-end reverse osmosis membrane element. The bottom membrane of the support layer has high compression resistance and thick skin.It is dense and has no defects on the membrane surface; it is resistant to abrasion and chemical degradation; and no post-treatment is required in the manufacturing process of membrane elements. Its wide pH resistance and high cleaning efficiency, can use ordinary acid and alkali for strong and efficient cleaning, because the cleaning is more thorough, the long-term operating pressure of the membrane system is lower, and the service life is higher. It can greatly reduce operating costs and bring long-term optimal economics to seawater desalination systems.


Product  Highlights

1.High salt rejection
2.Compression resistance, contamination resistance and high cleaning efficiency
3.Improve the overall economics of the desalination system


Membrane Specification


 

A inch(mm)	B inch(mm)	C inch(mm)
40 (1016)	1.125 (29)	7.9 (201)

Performance Specification
 

Effective Membrane Area ft²(m²)	Stablized Rejection Rate(%)	Minimum Rejection rate(%)	Flux gpd(m³/d)
365 (34)	99.8	99.7	6700 (25)

Test conditions: inlet pressure 5.5 MPa (800 psi); inlet temperature 25°C (77°F); inlet water quality 2000ppm NaCl; inlet pH 8; recovery 15%.



Operating and Cleaning Limits
 

Maximum operating temperature                                                                                                                                                                                         113 ºF (45ºC)

Maximum operating pressure                                                                                                                                    1200 psi (83 bar)

Maximum pressure drop                                                                                                                                                                                                        15 psi (1.0 bar)

pH range

Continuous operation                                                                                                                                                                              2 - 11

Short cleaning (30 minutes)                                                                                                                                                                                                                     1 - 13

Maximum Influent Sludge Density Index SDI                                                                                                                                             5

Free chlorine tolerance                                                                                                                                                                   < 0.1 ppm

Permeate flow for individual elements may vary ±15 percent from the value specifed.
Active membrane area guaranteed ±4%.
Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.



About Us

Production Line

Why Choose UltraClean

Delivery Package