Membran Osmosis Balik 8 inci 8040 RO untuk Perawatan Industrial Sistem Peralatan sebagai Filter dispenser pemurni air dengan kerak Tinggi Resistance

• Membrane Type: Spiral
• Type: RO
• penolakan garam: 99.3%
• flux (fluks: 11500 GDP
• ukuran: 8 inci
• rentang kehidupan: 2-3 tahun
• Tidak. Model.: BW8040-400FRLE
• tekanan pengoperasian maksimum: 600 Psi
• temperatur kerja maksimum: 45
• umpan maksimum sdi(sdi15): 5.0
• Paket Transportasi: Standard Export Package
• Spesifikasi: 110cm× 26cm× 22cm
• Merek Dagang: UltraClean or Customized
• Asal: China
• Kode HS: 8421999090
• Kapasitas Produksi: 150000PCS/Year

Deskripsi Produk

UltraClean FRLE series reverse osmosis membrane elements have extremely strong anti-fouling performance and low energy consumption performance. The membrane elements are developed for the treatment of low-quality feed water with a high tendency for biological or organic pollution. Its operating pressure is 30% lower than that of ordinary brackish water reverse osmosis membrane elements, the energy consumption is reduced by about 1/3, and the stable desalination rate can reach 99.3%. The anti-pollution low-energy series is available in 8-inch and 4-inch sizes.


Product  Highlights

1.It can effectively reduce the energy consumption of membrane system operation, and the system operation is economical.
2.Good pollution resistance, high pollution influent water quality


Membrane Specification


 

A inch(mm)	B inch(mm)	C inch(mm)
40 (1016)	0.75 (19)	3.9 (99)

Performance Specification
 

Effective Membrane Area ft²(m²)	Stablized Rejection Rate(%)	Minimum Rejection rate(%)	Flux gpd(m³/d)
400 (37)	99.3	99.0	11500 (44)

Test conditions: inlet pressure 1.03 MPa (150 psi); inlet temperature 25°C (77°F); inlet water quality 2000ppm NaCl; inlet pH 8; recovery 15%.



Operating and Cleaning Limits
 

Maximum operating temperature                                                                                                                                                                                         113 ºF (45ºC)

Maximum operating pressure                                                                                                                                      600 psi (41 bar)

Maximum pressure drop                                                                                                                                                                                                        15 psi (1.0 bar)

pH range

Continuous operation                                                                                                                                                                              2 - 11

Short cleaning (30 minutes)                                                                                                                                                                                                                     1 - 13

Maximum Influent Sludge Density Index SDI                                                                                                                                             5

Free chlorine tolerance                                                                                                                                                                   < 0.1 ppm

Permeate flow for individual elements may vary ±15 percent from the value specifed.
Active membrane area guaranteed ±4%.
Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.
 

Company Profile

 

Our Advantages

Certifications

Packaging & Shipping

After Sales Service

FAQ

1.Are you a manufactuere or trading company?

We are 100% manufacturer of RO and NF membranes which could help you get products with best quality and price from factory directly.

3.Where is your company factory?

Our Production Headquarter located in New Material Industrial Park, High-tech Zone, Ankang City, Shaanxi Province. Besides, our marketing center is located in Tiancheng Building, Xiangcheng District, Suzhou city, Jiangsu Province. The second factory here is now under construction, will be finished next year, welcome to visit!

2.How is the quality of your products?

We promise three-years quality warranty and will implement it in the form of a contract.

4.Do you support sample order?

Yes, we always support free sample to help our clients check the quality, but we do not bear the shipping cost.

5.Do you support OEM?

Yes, we support OEM service and welcome you to customize our products.

6.How long time usually your products to ship?

15 to 30 days, depend on the distance.