Route Tracing Radio Detection Underground Metal Pipeline Cable Detector

• After-sales Service: 1 Year
• Warranty: 1 Year
• Konektor: USB
• Mode Uji: Tes Instan
• Penggunaan: Tester Kabel Jaringan, Tester Kabel Audio, Tester Kabel Koaksial, Tester Kabel Digital
• Wilayah Pengujian: Tidak dibentuk
• Tidak. Model.: GW-2160C
• Tipe Kabel: Power
• Daya: Listrik
• Sertifikasi: CE, RoHS
• Disesuaikan: Tidak disesuaikan
• Warna: Oranye
• fungsi: GPS
• frekuensi output: 128hz, 512hz, 1khz, 2kz, 8khz, 33hz, 65hz, 83kh
• daya keluaran: maks. 10w
• frekuensi daya: 50Hz/60Hz,250Hz/300Hz
• HMI: 128x64
• catu daya: 4 x baterai terpasang 18650 li-on
• volume: Transmitter 270X220X85mm
• berat: pemancar 2,2kg
• Paket Transportasi: Export Standard Cartons with Strong Pallets
• Spesifikasi: CE ROHS
• Merek Dagang: grewin
• Asal: China
• Kode HS: 850450000
• Kapasitas Produksi: 500 PCS /Week

Deskripsi Produk

Product Description
1.Introduction

Usage:	Application:
The position, direction and depth of underground water pipeline, metal pipeline and cable, as well as the position and size of the damage point of the anticorrosion layer of steel pipeline	underground water pipeline, metal pipeline and cable

2.Product Pictures                                                  

3.Features
1.Function features:

1) Transmitter: three connection modes: inductive connection, direct connection and clamp connection; suitable for different occasions.

2) The receiver functions: detecting the position,path, depth and tube current of underground pipes and cables.

3) Left and right positioning arrows indicate the target pipeline position fast and accurately; front and rear arrows and dB value indicates the point and size of the coating damage.

4) Backlight suitable for urgent use in the nighttime.

5) Optional GPS geolocation with the automatic mapping of the pipelines.

6) Optional professional data analysis software with the automatic detection report.

7) Unique feature of GW-6000GE: locating the breakdown points (pipeline breakdowns refer to the coating damaged points while electric cable breakdowns refer to the outer layer damages.); detecting the insulation damages of underground pipeline and cable.

8) Measuring the current of the pipeline and cable applied by the transmitter.

9) Multimeter function: measure the output voltage, line voltage, line current, impedance and power; Test the cable continuity and insulation quality before and after cable fault finding.

10) External induction clamp: suitable for testing the cable when they cannot be directly applied to the signal of the place.

2. High Location Accuracy

A variety of measurement modes for pipeline positioning (valley mode, peak mode, broad peak mode, peak arrow mode), can verify each other to ensure the accuracy of pipeline positioning.

1) Maximum value method: peak mode, broad peak mode and peak arrow mode are available to determine the horizontal component or horizontal gradient changes, according to its maximum position to locate;

2) Minimum value method: use the valley mode by measuring the vertical component changes according to its minimum position to locate.

3. Measuring the depth

A variety of methods can be used to verify each other.

1) double-level coil direct reading method;

2) single-level coil 80% method, 50% method;

3) 45 degrees method

4. Strong anti-interference ability

1) Many Observation Parameters: can measure horizontal component , vertical component and horizontal gradient .

2) Large transmission power: the transmitter output power reaches 10W and it could be continuously adjustable.

3) Multiple Working Frequency:

Transmitter frequency: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz.

Receiver frequency: radio, 50Hz, 100Hz, 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz.

According to the target pipeline

features (material, structure, depth, length, etc.) and the environment to select the appropriate operating frequency.

5. Easy Operation

1) Intuitive: use the graphical display to get the sustained and real-time display of various parameters in the detection process and signal strength.

2) Automatic: in the depth measurement, automatic change to the two-level antenna mode and automatic adjustment of the receiver sensitivity so that the measurement signal achieves the best result. The mode returns to the original one after the depth measurement.

6. Long continuous working time with the low cost
Both the transmitter and the receiver are equipped with a large capacity lithium battery pack.

A fully recharge can last a whole working day outdoors. The recharging function has greatly reduced the detection costs.

7.AC and DC

Under normal circumstances, if the battery is sufficient, please use the instrument with built-in battery pack power supply. If the battery power is low, and the detection task is not completed, you can use the power adapter to continue the detection without having to recharge the battery.

Other Locating Method:

50Hz for power line signal detection, CPS signal (cathodic protection current signal), and radio signal detection.

4.SPECIFICATION

Transmitter		Receiver
Output	Direct Connection output, Clamp Coupling Output (optional), Radiation output, fault location booster (optional)	Receiving mode	Built-in coil,Built-in magnetic filed sensor Flexible clamp,Sensor,A frame
Output Frequency	128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz.	Receiving frequency	Active frequency: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz.Power frequency: 50Hz/60Hz,4-24kHz Radiation frequency
Output power	15Wmax,10 levers adjustable	Pipe detection mode	wide peak method, narrow peak method, valley method, history curve, frequency spectrum
Over voltage ,over current protection	auto	Cable identification mode	flexible Clamp (optional) intelligent identification and sensor (optional) identification
HMI	320x240 Black and white LCD	HMI	320X240 LCD color LCD,clear under sunshine
Power supply	4 X built-in 18650 Li-on batteries, standard 7.4V, >6AH	Built-in battery	2 X 18650 Li-on batteries, standard 7.4V,>3AH
Volume	280x220x90mm	Volume	680x120x277mm
Weight	2.3 kgs	Weight	2.0 kgs
Charger	DC8.4V,2A	Charger	AC 100~240V,50/60Hz
Temperature	-10-40ºC,humidity 5-90%,elevation <4500m

 

Company introduction

1.certification
We have passed ISO9001:2015,CE,SGS approval and IEC report

2.Company profile
     Tianjin Grewin is concentrating on transformers for 20 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First".Grewin is specialized in the design and manufacture of wound components such as transformer,current sensors, chokes etc .windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future.

3.Terms of Shipment:
Within 10 working days after received related prepayment or L/C.

4.Payment terms:
(1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
delivery.
(2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
(3)Payment by T/T, if order amount is less than USD 20,000.

5.Warranty:
(1)We provide 1 year warranty.
(2)If the product is defective, please notify us within 3 days of delivery.
(3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods

6.Why choose us?
Quality and honest first!
A. Flexible service for diffierent transformers with high efficiency performance.
B. Over 40 years experience of transformer designing and producing.
C.100% test of every single product we produce from incoming material checking.
D. UL, CE, ISO9001:2008
E. We offer custom-made transformers, OEM and ODM are welcome
F. We deliver the quality you expect at consistently competitive prices
G.Transformer quality lifetime:10 Years.
H.Specialty Sales service:5 -10 Years

7.Flow chart of trading activities:

NO	Step	Days need
1	Request for quotation	1 day
2	Making quotations	1 day
3	Offer and counter offer	3 days
4	Sending and receiving samples	3-10 days
5	Sample confirmation	3 days
6	Placing a firm order	1 day
7	Paying and receiving the down payment	1-4 day
8	Factory production & Quality inspection	15-20 days
9	Paying and receiving the balance	4 days
10	Delivery of goods	1 days

8.contact
Tianjin Grewin Technology Co.,Ltd. 
Web:transformer.en.made-in-china.com 
Address: 2# MeiNian Plaza No.16 DongTing Road,Hexi Distr,300222,Tianjin China.