Kit Uji Doa Rapid Test Ket Ketamin dengan CE

• Classification: Biological Diagnostics
• Type: Ivd Rapid Test Kits
• Certification: CE, MSDS, ISO13485
• Group: Adult
• paket: 40pcs/box
• terpotong: 300/500/1000 ng/ml
• Tidak. Model.: 108502
• moq: potong
• kehidupan di rak: 24 bulan
• penyimpanan: 4-30
• format: kaset
• oem: tersedia
• spesimen: urin
• Paket Transportasi: Carton
• Spesifikasi: 66*36*56.5cm
• Merek Dagang: Testsealabs
• Asal: China
• Kapasitas Produksi: 1000000PC Per Day

Deskripsi Produk

Testsealabs KET ketamine Test

Intended Use
The KET One-Step Ketamine Test Cassette is a lateral flow chromatographic immunoassay for the qualitative detection of Ketamine in urine at the following cut-off concentrations of 1000ng/ml.
This assay provides only a preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) is the preferred confirmatory method. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are used.





Test Procedure:
Allow the test and urine samples to equilibrate to room temperature (15-30ºCor 59-86ºF) prior to testing.

1. Remove the test cassette from the sealed pouch.
2. Hold the dropper vertically and transfer 3 full drops (approx. 100ml) of urine to the specimen well of the test cassette, and then begin timing. See the illustration below.
3. Wait for colored lines to appear. Interpret the test results at 3-5 minutes. Do not read results after 10 minutes.

How To Read Results:
Negative: *Two lines appear. One red line should be in the control region (C), and another apparent red or pink line adjacent should be in the test region (T). This negative result indicates that the drug concentration is below the detectable level.
 *NOTE: The shade of red in the test line region (T) will vary, but it should be considered negative whenever there is even a faint pink line.
Positive: One red line appears in the control region (C). No line appears in the test region (T). This positive result indicates that the drug concentration is above the detectable level.
Invalid: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test using a new test panel. If the problem persists, discontinue using the lot immediately and contact your local distributor.
 

FAQs:
Q: What are your price?
A: Our price are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact       us for further information.

Q: Do you have a minimum order quantity?
A : Yes, require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check our our website.

Q: Can you supply the relevant documentation?
A: Yes, we can provide most documentation including certificates and other export documents where required.

Q: Can you make OEM or ODM service?
A: Yes. We can accept OEM service. Meanwhile it's also welcome to choose our ODM products.