Stan Penyemprotan (BC-728, Tipe Oli Bahan Bakar)

Outside size(L*W*H): 7000*5550*3450mm
Inside size(L*W*H): 6880*3880*2750mm
Main door(W*H): 3000*2700mm
Total power: 9.8 KW

Room system:
1) Wall panel: EPS insulated material, coated steel cover, thickness: 60mm.
2) Basement: Galvanized steel plate, assembled by painted square pipe(40*80mm), 3 rows of painted grating, 2 rows of antiskid plate
3) Ramp: Anti-skid board

Air circulation system:
1) Air-intake: 2 set of YDW 4.0kw centrifugal fan, total capacity: 26000m3/h
2) air-exhuast(Optional): 1 set of YDW 4.0kw centrifugal fan, capacity: 13000m3/h,
3) 1 PCS of 10N automotive damper acuator to ensure the internal and external cycle is accurate and smooth from spraying to baking cycle.
4) Work area: Painted
5) Full air speed: 0.25~0.35m/s; Air exchange rate: 298times/h; Noise less than 80dB(a). Low noise, big capacity, energy-saving.

Lighting system:
1) Upper light: 32 PCS of 36W light tube in the ceiling.
2) Side light(Optional according to customer's requirement): 16 PCS of 36W light tube with ballast. 3) Illumination more than 1000Lux

Air filter system:
1) Two filter layer structures: Crude and refined filter. Crude filter: Domestic high quality nonwoven cotton, can catch the dust larger than 10 um, fixed on the vent door of work area, there is an adjustalbe door for its replacing. Refined filter: BAOCHI600G high quality filter cotton made by customization, multi-layers, fixed on the bottom of plenum, supported by coated top net, beautiful and easy to replace. The whole filter system has a big dust capacity, low windage, long-use, the filter rate is more than 98%, TSP value less than 1.4mg/m3.

2) A bird preventing net on the air inlet door, drawer-type device which can avoid paint sticking on fans.

Heating system:
Italian RIELLO G20 light oil burner equiped with single-side check valve; 200000kal/h, 6~8KL/set/hour; Heating-up time: 6~8 min.

Heat exchanger:
Welding by high quality stainless steel, reasonable structure, safe and reliable, big heat exchanging area, high heat utilization, more than 85% heat exchanging rate.

Control system:
1) The main parts are famous brand at home or abroad for spray booth. Stable, reliable, convenient and accurate system, multi-protection circuit, can automatically display all the work process and the fault condition.

2) Light switch, temperature time setting, normal spraying, risen-temper spraying, baking, emergency stop, failure alarm, over temperature alarming, hour meter, the whole working process can be set in a time.

Environmental cabinet(Optional according to customer's requirement):
Use 5.5KW centrifugal fan, multi-layers paint filter device and active carbon filter device, reach the national standard(Integrated emission standard fo air pollutants).