Aplikasi Alat berat bagian Pemotongan Otomatis untuk jumlah Lapisan

• Layanan purna jual: online
• Kondisi: Baru
• Sertifikasi: CCC, ISO, CE
• Garansi: 12 bulan
• Kelas Otomatis: Otomatis
• Instalasi: Vertikal
• Tidak. Model.: SD-001
• Paket Transportasi: Wooden Case
• Spesifikasi: 2400*570*320mm
• Merek Dagang: SD
• Asal: Cina
• Kode HS: 8515809090
• Kapasitas Produksi: 10000

Deskripsi Produk

Product introducion

1.Product introducion:

                Automatic PCB cutting piece Machine application for Number of Layers

   

1.The machine is designed specially to cut PCB boards of strip lights and back-light modules.

2.The machine is applicable for various substrates, such as FR4, Aluminum substrate, etc., and it is the best choice for Aluminum substrate.

3.The cutting depth of three cutters is increased stepwise to guarantee processed surface is smooth and processed substrate is free of deformation and bucking.

4.Due to the stepwise increase of cutting depth, the bending stress born by PCB board is too small to damage components on PCB boards.

5.PCB alignment is placed at left side of operation platform firstly, then pushed backwards against the location plate, and then moved right along the location plate into the cutting area, then PCB alignment moves forwards automatically till one individual PCB is cut out completely, and then remaining PCB alignment is placed at left side again to repeat previous processes.

6.Operator's workload is reduced dramatically by the work platform due to its simple operation.

7.Its processing rate is highest among other competitive products.

Durable cutters are made from Sweden SKH-9 high-speed steel.

 

Product Description

 

 

Maintenance and repair

(1) High temperature

The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.

(2) Voltage problem

After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.

(3) Professional maintenance

Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.