Informasi dasar.
Working Style
Reciprocating Type
Screwdriver Startup Mode
Under pressure
Deskripsi Produk
We have been a manufacturer of spray equipment since 2007
Our own trademark "SAWEY" | OEM services
Guangzhou SAWEY Spray Manufacturing Co.Ltd, established in 2007 is a professional manufacturer for spray guns and spray equipment. We produce auto/hand spray guns and other spray accessories to meet the industry trend of spray finish. We also import all kinds of spray guns, tools from Japan, Taiwan and Switzerland to provide efficient and superior spray tools to mainland China customers. Meanwhile, we export spray guns of our own trade mark "SAWEY" overseas.
We do OEM for any brand customers provide. We export our products with the most favorable price to countries all over the world.
Note: When you place order, please leave message to tell us What nozzle size you want ,thank you !
If you didn't leave me message or contact me by anyway that telling me the type and size you reqeust, i will ship the type and size as what i sale most without informing you, thanks!
Model | Type of feed | Nozzle orifice(mm) | Spray Distance (mm) | Spraying Pressure Mpa(kgf/cm2) | Air Consumption (L/min) | Fluid Spraying Volume (ml/min) | Pattern Width (mm) | N.W.(g) |
SYA-6-07P | Pressure | 0.7 | 200 | 0.20(2.0) | 280 | 180 | 180 | 405 |
SYA-6-11P | | 1.1 | | | 280 | 200 | 220 | |
SYA-6-14P | | 1.4 | | | 280 | 220 | 260 | |
OPERATING INSTRUCTIONSPrior to operation read the operating instructions carefully.SAWEY automatic spray gun can only be used as a pneumatic tool.This spray gun must never be used for any other purpose as it may jeopardize the personal safety of the operator or other persons present.OPERATIONConnect atomizing air hose to atomizing air connector (CAP marked) and operating air hose to operating air connector (CYL marked) tightly.Connect fluidhose to fluid connector tightly.Valve orifice inside three-way solenoid valve should be minimum ø4mm (0.157 in) and the operating hose should be within 10m (32.8 ft) and the inside diameter must be not less than 6mm (0.236 in) to avoid delayed operation and any failure.The recommended operating air pressure is 3-4 bar (43-57 psi).SAFETY- Never allow untrained or unauthorized persons to operate this automatic spray gun.
- Do not point the gun toward yourself or others.Solvents can cause damage to people's eyes and skin.
- To repair the gun, please turn off the air paint beforehand.
- Never use matches,smoke or operate a spray gun in the vicinity of a naked flame.
SERVICING- Be sure to clean the gun every time you finish using it.Do not submerge complete automatic spray gun in solvents.
- Do not damage holes of air cap set and fluid nozzle.Clogged air holes must not be cleaned with metal objects.
- Clean air cap set,fluid nozzle and fluid needle with brush after each operation.
- Flush the gun material passage with a compatible solvent.
- Clean the parts before reassembling the gun.
- Do not push fluid needle packing screws to the end, otherwise the needle will not be able to move. Just move it to a level that will not drip paint.
- if fluid adjusting knob turned counterclockwise too loose, it will reduce the flexibility of the thimble spring, so that it will cause nozzle drip paint.
TROUBLE - SHOOTINGTROUBLE | CAUSE | CORRECTION |
Fluttering | A.Insufficient material in cup. B.Dry or worn fluid needle packing set or loose fluid needle packing screw. C.Loose or damaged fluid nozzle. | A.Refill material. B.Lubricate or replace fluid needle packing set or tighten fluid needle packing screw. C.Tighten or replace fluid nozzle. |
Crescent | A.The fluid nozzle has been damaged. B.Material build-up on air cap. | A.Clean air cap with proper objects. B.Clogged air holes must not be cleaned with metal objects. |
Heavy top or bottom | A.Material build-up on air cap. B.Dirty or damaged fluid nozzle. | A.Clean or replace air cap. B.Clean or replace fluid nozzle. |
split | A.Material too thin or not enough. B.Atomizing air pressure too low. | A.Increase material viscosity. B.Reduce air pressure. |
Heavy center | A.Material too thick or too much. B.Atomizing air pressure too high. | A.Reduce material viscosity. B.Increase air pressure. |
Gun drips from fluid nozzle | A.Obstructions between fluid nozzle and fluid needle. B.Worn fluid nozzle or needle. | A.Clean fluid needle and fluid nozzle in thinner. B.Replace parts. |
Gun leaks from needle packing screw | A.Loose fluid needle packing screw. B.Dry or worn fluid needle packing. | A.Tighten fluid needle packing screw,check fluid needle for free movement. B.Lubricate or replace needle packing. |
| | | | | | | | | | |
| PARTS NAME | | | 10 | Packing Spring | 1 | | 20 | Fluid Control Spring | 1 |
1 | Cap Ring | 1 | | 11 | Packing Screw Seat | 1 | | 21 | Calibration Chassis | 1 |
2 | Air Cap | 1 | | 12 | Packing Gasket | 1 | | 22 | O Ring | 1 |
3 | O Ring | 1 | | 13 | Packing Screw | 1 | | 23 | Calibration Knob | 1 |
4 | Fluid Nozzle | 1 | | 14 | Fluid Needle | 1 | | 24 | Fixed Screw | 1 |
5 | Air Distribution Ring | 1 | | 15 | O Ring | 1 | | 25 | O Ring | 5 |
6 | O Ring | 1 | | 16 | Needle Seat | 1 | | 26 | Gun Body Seat | 1 |
7 | Distribution Ring Base | 1 | | 17 | Needle Screw | 1 | | 27 | Air connector | 3 |
8 | Gun Body | 1 | | 18 | Needle Seat Spring | 1 | | 28 | Fluid connector | 2 |
9 | Packing Seal | 1 | | 19 | Fluid Control Valve Seat | | | 29 | Screw | 1 |
Alamat:
No11, 2 Street Dongyuan Road, Panyu District, Guangzhou
Jenis Usaha:
Produsen/Pabrik, Perusahaan Perdagangan
Jangkauan Bisnis:
Furnitur, Industri Ringan & Penggunaan Harian, Mainan, Mesin Manufaktur & Pemrosesan, Metalurgi, Mineral & Energi, Mobil, Suku Cadang Motor & Aksesoris, Perkakas & Hardware, Perlengkapan Industri & Komponen, Produk Komputer, Seni & Kerajinan Tangan
Produk Utama:
Pistol semprotan, penyemprot, pistol Penyemprotan Udara, Pistol semprotan Cat, Alat Daya, Mesin semprot, Air Tool, Alat melukis, Alat pencilup, senjata Kupu-Kupu, Kupu-Kupu
Pengenalan Perusahaan:
Guangzhou SAWEY Spray Manufacturing Co., Ltd. Didirikan pada tahun 2007, yang merupakan produsen profesional untuk alat semprotan & peralatan semprotan. Sejak didirikan, pabrik ini mengkhususkan diri dalam pengembangan penyemprotan air, untuk memenuhi tren industri perkembangan zaman penyemprotan otomatis, yang dipandu oleh pasar, kami menangkap senjata semprotan otomatis dan manual dari Jepang, Taiwan & Swiss, untuk menyediakan alat penyemprotan yang efisien & unggul kepada pelanggan China; Sementara itu kami mengekspor senjata kami sendiri tanda " SAWEY" ke luar negeri.
Pelanggan kami berasal dari industri peralatan elektronik, perlengkapan listrik, kimia, sepatu, mesin, keramik, makanan, kaca, minuman, obat, painted, pembuat kertas, tekstil, arsitektur, mobil, Metalurgi, casting, kulit, dsb.
Saat ini, kompetisi pasar internasional menjadi lebih sengit dan lebih sengit, kami akan terus bertindak sesuai dengan ′kualitas hidup, penghargaan terhadap layanan′, untuk menciptakan masa depan yang cemerlang bersama teman-teman dari semua industri...
Kami OEM untuk merek apa pun yang Anda berikan dengan semprotan senjata & kami mengekspor dengan harga & ketentuan paling menguntungkan bagi negara-negara di seluruh dunia.
Kami memberikan penekanan pada kualitas produk, terus menjaga kredibilitas & kepuasan pelanggan, kami adalah perusahaan yang andal. Kita mendesak untuk menciptakan kondisi bisnis yang saling menguntungkan dengan semua pelanggan asing.