Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit RFP series standard fan coil unit can be widely used in hotels, restaurants, factories, hospitals, shopping malls and other places.
It integrates advanced low-noise fan manufacturing technology, air-conditioning product manufacturing process, and the newly developed advanced fin shape. It is a new generation of ultra-low noise, ultra-high efficiency, and re-development based on the original fan coil design A convenient and compact structure replacement product, the unit has the following characteristics:
Ultra low noise:
The unit adopts the newly designed low-speed forward multi-wing wide impeller, which is optimally matched with the motor, and has good thermal insulation and muffler materials, so that the noise of the unit is generally reduced by 2 ~ 5dB (A) to the best level compared with similar units. Imported low-noise rolling bearings, no need to add lubricating oil, the design life is more than 12 years.
High efficiency:
The heat exchange coil adopts the newly developed fin form combined with the secondary flanging structure. Through the advanced mechanical tube expansion process, the copper tube and the aluminum foil are in close contact. The new fin provides an ideal heat flow channel for full heat exchange. The impeller provides a uniform heat transfer air speed environment for the coil, which makes the heat transfer efficiency higher and the heat transfer more sufficient, so that the unit input power and unit cooling capacity of the unit coil in the case of two rows meets or exceeds that of the industry level.
Ultra-thin body:
The height of the unit is only 230mm, which can save more installation space than similar coils and fully meet the installation requirements of various occasions.
Various options:
The design fully considers the particularity of the installation site and the site constraints, and the unit can provide drain pan of different lengths for customers to choose.
Standard drain pan--specially designed for narrow spaces, which can reduce the required installation position, suitable for places with limited installation space.
Extended drain pan--can more effectively accept valve leakage and condensate.
Stainless steel drain pan--According to special anti-corrosion requirements, stainless steel drain pan can be selected.
Silent operation:
The use of new environmentally friendly sound-absorbing glass fiber insulation materials can not only ensure a smooth and beautiful appearance, but even under severe condensation conditions, the insulation performance of the unit can meet the requirements of international standards.
Optional wet film humidification:
Use the natural evaporation of water for humidification, combined with the surface cooler, save the length of the unit, and the air enthalpy change.
Equipment structure / material description:
*The motor drives the centrifugal fan through the rotating shaft and is assembled on the back panel of the heat exchanger.
*All sheet metal is galvanized steel, and the insulation material is self-extinguishing PE.
*The addition of wet film humidification can facilitate temperature and humidity regulation in a single space.
*The coil is made of copper tube and aluminum coil fin structure. It adopts mechanical expansion method to ensure efficient heat exchange, and is expanded and integrated into the end plates on both sides of the coil.
*Equipped with lifting holes, which can be easily installed on site. The chilled water inlet and outlet pipes, condensate pipes and junction box are located on the same side of the unit.
Technical data:
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
