220VAC Steam Control Unit Air Vortex Flow Meter Manufacturer Flowmeter

• After-sales Service: 24 Hours Online
• Warranty: 1 Years
• Akurasi: 1.5%
• Aplikasi Utama: Air, Air Limbah, Bahan Bakar Diesel, Fuel Oil, Alam Gas, Cairan/Gas korosif
• Ukuran: DN15-DN400
• Sensor: Tabung/Flensa
• Tidak. Model.: QZLUG
• Aplikasi: Produksi Industri
• Tipe: Meteran Aliran pusaran
• Mengukur Media: Gas /Liquid
• Prinsip Pengukuran: Prinsip-Prinsip Elektrik
• Objek Pengukuran: Saluran Tertutup
• Sertifikasi: CE
• dukungan khusus: oem, odm
• output: 4-20mA /RS485/ Pulse
• tampilan: lcd
• koneksi: Clamping Flange/Integrated Flange/Thread
• kelas proteksi: IP65/IP68
• catu daya: 24 vdc/baterai
• sedang: Gas /Liquid /Stream
• material tubuh: 304ss,316L
• temperatur sedang: -40°c~350°c
• Paket Transportasi: Wooden or Carton
• Spesifikasi: DN15-DN400
• Merek Dagang: QZHI-SETSAIL
• Asal: Anhui, China
• Kode HS: 9026100000
• Kapasitas Produksi: 7000 Set/Sets Per Month

Deskripsi Produk

Measurable Media


Gas

Compressed Air

Superheated Steam

Saturated Steam

Heat Transfer Oil

High Temperature Liquids

Nitrogen

Hydrogen

Oxygen

Water

Applicable Industries

Product Description

The vortex flowmeter is designed based on the Karman vortex principle, which can measure the flow, temperature, pressure and other parameters of the medium fluid of industrial pipelines according to different types, and has the functions of pulse frequency output, 4-20mA analog signal output, RS485 communication, Hart protocol and so on. It is widely used in heating, gas supply, textile, steel, medicine and other industries to measure and control gas, compressed air, steam, nitrogen, heat transfer oil and other media.

It is known as Tongjing	15/20/25/32/40/50/65/80 /100/125/150/200/250/300 (300-1000) plug-in
Nominal pressure	DN15-DN2004.0 (> 4.0), DN250-DN3001.6 (>1.6)
Medium temperature °C	-40~150,-40~250,-40~350;
Accuracy	±1%R,±1.5%R; Plug-in: ± 2.5%R
Range	1:6~1:30
Supply voltage	Sensor: DC12V, DC24V; Transmitter: DC24V; Battery-powered type: 3.6V battery
Output signal	Square wave pulse (excluding battery-powered type): high ≥ 5V, low ≤ 1V;     Current: 4~20mA
Pressure loss coefficient	Conform to JB/T9249 standard Cd≤24
Explosion-proof signs	Intrinsically safe type: ExdIlia CT2-T5 flameproof type: Ex db IIC T6 Gb
Ingress protection	Ordinary IP65 type
Environmental conditions	The temperature is -20°C~55°C, the relative humidity is 5%~90%, and the atmospheric pressure is 86~106kpa
Applicable media	Gases, liquids, vapors, mixed gases, flammable and explosive gases
Transmission distance	Three-wire pulse output type: ≤100m, two-wire standard current output type (4~20mA)≤200m: load resistance≤750Ω; RS485/HART≤500m

Fully Automatic Inspection And Calibration Equipment In The Factory

 

No Temperature And Pressure Compensation

Integrated Temperature And Pressure Compensation

Product Upgrades
The square fastening screws are reinforced from the normal round to squarefastening columns which can adapt to a higher degree of on-site vibration.

Threaded Connection

Clamp Flange Connection

One-piece Flange Connection

 

Note: Choose Temp And Pressure Compensation For Gas Measurement

Gases are highly susceptible to pressure and temperature, which requires accurate measurements, temperature 25ºC and standard atmospheric pressure.

However, field conditions often can not be satisfied, therefore, it is necessary to involve temperature and pressure compensation.

Feedback From Customers

Instrument Diameter(mm)	Liquid		Gas
	Measuring Range (m3/h)	Output Frequency Range (Hz)	Measuring Range (m3/h)	Output Frequency Range (Hz)
15	0.3~5	35~450	4~20	352~1761
20	0.6~10	29~380	6~30	250~1273
25	1.2~16	25~320	8~50	160~1100
32	1.8~20	18~200	10~150	97~1180
40	2~40	10~190	20~200	130~1040
50	3~60	8~150	35~350	87~952
65	4~85	6~120	45~450	71~764
80	6.5~130	4.1~82	86~1100	54~696
100	15~220	4.7~69	133~1700	42~548
125	20~350	3.2~57	150~2000	26~346
150	30~450	2.8~43	347~4000	34~392
200	45~800	2~31	560~8000	22~315
250	65~1250	1.5~25	890~11000	18~221
300	95~2000	1.2~24	1360~18000	16~213

FAQ

1. Q: Where is your company located? Can I visit your factory?
A: Our company is located in Wuhu City, Anhui Province, China. We sincerely invite you to visit our factory.

2. Q: How can I get some samples?
A: Welcome to contact us by email or Alibaba to meet your requirements

3. Q: How does your factory do in terms of quality control?
A: Quality first. We always regard quality as the most important thing in the entire production process. Our factory has obtained CE certificates.

4. Q: What is your after-sales service? What about the warranty?
A: We provide 12 months warranty for our products, and we have a dedicated after-sales service team.

5. Q: Can you provide OEM or design service?
A: Yes, we design and manufacture our products by ourselves. We can OEM according to your requirements, including packaging, logo printing, etc.

6. Q: How about your delivery time? How do you ship the goods?
A: Once you receive your deposit, production will start immediately. About 5-7 working days after payment, we usually ship by DHL, UPS, FedEx or TNT, but also by air and sea. For urgent orders, please contact us to inquire about stock availability.

7. Q: How to deal with failures?
A: First of all, our products are produced under a strict quality control system, and the defective rate will be less than 0.2%. Secondly, during the warranty period, we will send a small number of new parts by new order. For defective batches of products, we will repair it and send it to you, or we can discuss solutions including re-recall according to the actual situation.