Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 1 Maintenance-free: the net chain type track is made of stainless steel, no matter how long it is not used, it can be turned on and used; the traditional carbon steel chain will rust if it is not used for a long time, and the daily use also needs to be matched with an oil pot to add high-temperature lubricating oil, which has high daily use cost and high requirements for operators.
2. Permanent service life: traditional carbon steel chain-shaped each section has four riveted points, long time use riveted points are easy to loosen. Net chain type track each section of the integrated molding without any riveting points.
3. The width adjustment mechanism is simple and easy to use, and the front and rear ends are equipped with anti-accident handles, which can be used at any time to prevent abnormalities in the track.
4.built-in welding fume filtration system, effective filtration of harmful gases, beautiful appearance and environmental protection, more in line with the use of high-end environment.
5.40 working files can be stored.
6.Up to 4 real-time temperature curves can be displayed.
7.Lightweight, miniaturization, professional industrial design, flexible application scenarios, more user friendly.
8. Concealed screen design is convenient for transportation, easy to use, beautiful and generous.
9. The control system uses imported chips, temperature control accuracy of ± 0.5%
10. The speed of heating and cooling zones is adjustable, easily cope with a variety of welding needs.
| Model | NeoDen IN12 |
| Heating Zone Quantity | Upper6 / Down6 |
| Cooling Fan | Upper4 |
| Controller | VGUS Microcomputer |
| Transmission | Mesh Chain Drive |
| Heating Type | Nichrome Wire & Aluminum Alloy Heating |
| Conveyor Speed | 50~600 mm/min |
| Temperature Range | Room temperature~300ºC |
| Temperature Accuracy | 1ºC |
| PCB Temperature Deviation | ±2ºC |
| Max Soldering Width (PCB Width) | 350mm |
| Length Process Chamber | 1354mm |
| Heat-up Time | 30 min |
| Max Soldering Height (mm) | 35mm (includes PCB thickness) |
| Operation Direction | left→right |
| Electricity Supply | AC 220v/single phase |
| Starting Power | 2.4kw~4.8kw (adjustable) |
| Typical Working Power | approx. 2kw(1.5mm fiberglass PCB ) |
| Machine Size | L2300mm×W650mm×H1280mm |
| Packing Size | L2420mm×W730mm×H1430mm |
| Net Weight | 300KGS |
| Gross Weight | 383KGS |
What is reflow soldering
The basic process behind reflow or to provide its full name, infra-red reflow soldering requires that solder paste is applied to the relevant areas of the board.
The components are then placed, and then the assembly is passed through a tunnel where the board is heated in a controlled manner so that the solder paste melts and the components are electrically secured to the printed circuit board.
Using reflow soldering technology it is possible to reliably solder surface mount components, and particularly those with very fine pitch leads. This makes it ideal for use with the components used in mass produced electronics products.
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
