Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit The injection and mold locking system of this machine adopts vertical structure, the whole machine consists of: mold locking device, lower core mold ejection device
Vacuum pumping device, injection device, rubber plasticizing device, injection and plasticizing temperature control device, mold temperature control device, hydraulic system, electrical control system
| S.No | Description | Remarks |
| 1 | Clamping force | 800T |
| 2 | Plunger of mold locking cylinder | ¢700mm |
| 3 | Hydraulic system pressure | 210kgf/cm² |
| 4 | Mold opening/closing speed | Max 100mm/S |
| 5 | Mold closing stroke | 1000mm |
| 6 | Heating platen size | 1000 × 1000mm |
| 7 | Heating platen spacing | 1400-1500mm |
| 8 | Mould Thickness | 410-650mm |
| 9 | Diameter of ejector cylinder | ¢50mmx2 |
| 10 | Ejection stroke | 500mm |
| 11 | Vacuum pump power | 1.1KW |
| 12 | Injection volume | Max 10000ml |
| 12 | Injection pressure | 1500kgf/cm² |
| 14 | Injection rate | Max 230cm²/S |
| 15 | Accuracy of injection weight | ±0.3% |
| 16 | Diameter of plasticizing screw | ¢65mm |
| 17 | Screw ratio | 12 |
| 18 | Rubber strip size | 70x15mm |
| 19 | TCU heating power | 2×6KW |
| 20 | TCU control temperature | 0-110ºC |
| 21 | TCU Heating media | Oil |
| 22 | Heating platen heating media | Steam |
| 23 | Steam pressure | <1.5MPa |
| 24 | Main hydraulic motor power | 37kW |
| 26 | Total power | 52kW |
| 27 | Weight | 33T |
| 28 | Overall dimension | 2900x1250x4268mm |
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
