Informasi dasar.
Type
Reflective Panels Type Photoelectric Sensor
Output Signal Type
Analog Type
Production Process
Integration
Certification
Internal Certification
Paket Transportasi
Carton
Deskripsi Produk
Features:- Adopt new microprocessor technology and robust structural design
- Not applicable to rotating prism, electronic scanning is adopted
- Accurate and reliable position detection of hot metals reaching and exceeding 300 ºC
- Adopt signal comparison technology-remove background infrared noise interference
- The measurement is not affected by local heat source in the market, lens dust and field water vapor
- The scanning field of view angle is 1 × 15, 2 × 22 and 3 × 35
- The position of the measured object is displayed by using rod-shaped LED luminous tube
- The response time is 1ms and digitally adjustable in the range of 1-250ms
- Instrument power-on self-inspection or remote control self-inspection
- Relay output, photoelectric isolation output, transistor output PNP/NPN
- It also has AC AC80-240V and DC DC24V power supply interface
- Cast aluminum shell has unique purging and cooling functions, and air and water cooling are optional
- MSE-PF100 electronic scanning thermal metal detector uses linear germanium diode array
Brief introduction of principleMSE-PF100 scanning thermal inspection uses electronic scanning instead of traditional optical cooling scanning, which omits the maintenance of rotating parts and improves the scanning reliability. However, the traditional static analog thermal detection HMD only uses a photodiode to detect infrared signals exceeding the set threshold, which is easily affected by water mist and field background thermal radiation.Electronic scanning thermal inspection can realize rapid and accurate detection of the head and tail edges of rods and wires or rigidity by using microprocessor technology, and the response time is digitally adjustable. The LED bar-shaped display bar at the back of the sensor can not only display the position of the measured object, but also accurately adjust various parameters.Main technical parametersParameter | Indicators | Parameter | Indicators |
Typical application | 350 ºC, 10mm rod Detect from 2 meters | Power supply Voltage | 24VDC ± 15% |
350 ºC, 50mm rod, Detect from 4 meters | Power | 5VA |
Detecting device | Electronically scanned Germanium diode array | Work Temperature | -10-+ 50 ºC without cooling |
Scanning rate | 1200 beats/sec | Cooling with air at 70 ºC |
Response time | 1-250ms digital adjustable | Cool with water at 80 ºC |
Minimum product temperature | 300 ºC | Self-inspection | Power-on self-inspection: self-inspection of instrument after power-on Remote control self-test: remote trigger, continuous detection |
Products Position display | 10 LED display arrays | Output (1) | Relay output: (normally open) 240VAC 10A, 20W, 4ms response time |
Scanning angle | Standard: 1ox 15o Optional: 2oX22o, 3oX35o | Output (2) | Optical isolation output: 300VAC 150mA 200mW, 2ms response time |
Detection technology | Adopt the technology of comparing the intensity of signal and background thermal radiation-remove the interference of background infrared noise | Output (3) | NPN & PNP output: 400mA, 45V. 2A peak |
Instrument housing and coolingMaterials | AI6 cast aluminum, high temperature sprayed | Cooling mode | Air cooling + air purging; Water cooling + air purging |
Protection level | IEC IP66, DIN 89011 | Air pressure | 5-15PSI, flow rate: 28-140L/min |
Weight | 1.9 kg | Water pressure | 5-10PSI, flow rate: 0.2-0.3 L/min |
Cable joint | IP65 | Water temperature | Use cooling water at 20 ºC when the ambient temperature is lower than 70 ºC |
Length | 2 metres | Use cooling water at 5 ºC when the ambient temperature is higher than 80 ºC |
Description: Scanning thermal inspection can be air cooling or water cooling, no matter which cooling method can be added with air purging function to keep the light path clean.Typical application- General application: Detect hot metal products with temperature exceeding 300 ºC
- For hot strip mill: Accurate and rapid detection of head and tail position (for length measurement and optimized shearing)
- For bars and profiles: in the background (roller table) thermal radiation and bar thermal radiation is very close to the occasion;
- Quickly detect the head and tail of hot metal where water mist and steam often appear
- It has nothing to do with volume, temperature and shape, but it requires high edge detection of hot metal
Alamat:
Kexin Building, 212 Changjiang Road,Yantai Development Zone, Shandong, China
Jenis Usaha:
Produsen/Pabrik, Lainnya
Jangkauan Bisnis:
Instrumen & Alat Ukur, Perlengkapan Industri & Komponen
Pengenalan Perusahaan:
Kami adalah sebuah perusahaan teknik di Yanai dengan manajemen Jerman dan investasi Jerman. Kami mengembangkan, memproduksi dan memasarkan sensor optik kontak pasar dan sistem pengukuran untuk kecepatan, panjang, jarak, lebar, ketebalan, ketinggian dan posisi dingin serta material panas.