Informasi dasar.
Function
Didactic Equipment for University
Purpose
Vocational Training Equipment for University
Paket Transportasi
Plwood
Deskripsi Produk
MR318E Minrry Interactive System On The Basics Of Photovoltaic Technology
Education Laboratory Equipment Vocational Training Equipment Fire Alarm System
Complete set to study the solar photovoltaic approach
This system is composed of the following elements:
4 photovoltaic modules with connection accessories.
Charge controller with the necessary overload protection
1 solar battery
1 Inverter
Instrument for measuring the intensity of light
Lamp with dimmer
Measuring instrument compatible with photovoltaic technology (current, voltage,..) for the complete study of the system.
MR010E Programmable Logic Control Trainer
| Input power | three phases, five wires, 380V±10% 50Hz |
| Dimension | 1600mm×800mm×1300mm(desktop type) |
| Weight | <100kg |
| Whole capacity | <1.5KVA |
| Environment temperature | -10ºC~+40ºC |
| Relative humidity | <85%(25ºC) |
3 Product composition3.1 Power control screenThe power control panel adopts aluminum alloy profile panel, closed box body structure, and the lower shelf is connected to one.3.2 Training benchThe actual training table is supported by the aluminum profile column, and the bottom wanxiang wheel brake is flexible and can be moved and positioned flexibly. The tabletop uses the high density base plate of 25mm thick, the surface high temperature and high pressure fire prevention board face treatment, complete with three guide type drawer 2, sliding door type bottom cabinet 2 pieces, the structure is firm, beautiful and generous.3.3 Power control screen configuration(1) The input of three-phase five-wire power supply, controlled by the leakage circuit breaker, has the emergency stop control button, and in case of emergency, press the emergency stop button breaker to cut off the power supply.(2) Equipped with power indicator, power output socket and secure type power supply terminal.(3) Configuration ac motor special protection switch, built-in ac power supply, short circuit protection function.(4) Built-in AC power and short circuit protection.
Power supply box, AC 1ph & 3ph and DC outputs:- 01 output variable DC 0 to 230V / 10A min, with security socket and protected by circuit breaker- 01 output variable DC 0 to 230V / 1A for rotor excitation, protected by circuit breaker- 01 output variable AC 3ph, with protected sockets, 0 to 430V + N / 5A protected by circuit breaker- 01 output constant AC 3ph, with protected sockets, 400V + N / 10A protected by circuit breaker- 04 outputs at least on single phase sockets 230V + Ground, 16A protected by circuit breakerThe box must be protected by a differential circuit breaker with high sensibility, emergency push button and key switch. It should be also protected against DC motor run-away by general cut-off, a synoptic in front illustrate the cabling drawing and light indicators which indicate voltage presence4.Equipped components(1)1 field rheostat for DC machines(2)1 starting rheostat for DC motors(3)1 rheostat for rotoric start for slip rings motor(4)1 resistive load 3ph variable by rows (by switches), having same power as the required machines (DC and AC generator)(5) 1 capacitive load 3ph variable by rows (by switches or hand wheel), having same power as the required machines DC and AC generator)(6)1 inductive load 3ph variable by rows (by switches), having same power as the required machines (DC and AC generator)(7)1 DC machine with shunt excitation, minimal power 0.75 kW, 220V, 1500 rpm can operate as motor and generator(8)1 DC machine with serial excitation, minimal power 0.75 kW, 220V, 1500 rpm can operate as motor and generator(9) 1 DC machine with combined excitation, minimal power 0.75 kW, 220V, 1500 rpm can operate as motor and generator(10)1 asynchronous motor, cage rotor 3ph, 220/380V 50Hz, 1500rpm, 0.75kW min
(11)1 DAHLANDER double speed asynchronous motor cage rotor, 380V 50Hz, 0.75kW min, 1500 and 3000 rpm(12)1 synchronous reversible motor, 220/380V 50Hz, 1500rpm 0.75kW(13)1 single phase asynchronous motor, with auxiliary pole, with starting condenser, cage rotor, 230V/50Hz, 1500rpm, 0.75kW(14)1 universal single phase motor, powered by DC and AC 230V 50Hz, 1500 rpm, 0.75kW(15)1 set of connection wires with different lengthsMachines must have the same shaft height, with didactic connection boxes having synoptic with connection schema.(16)1 brake to simulate mechanic loads, adequate speed and power for the motors, the brake allows to calculate the couple by 1 method.(17)1 board for parallel mounting of a 3ph alternator with the industrial network. The board is equipped by safety sockets and a inverter to verify frequency and voltage equality (alternator side and network side), equipped by light indicator, to verify phases correspondence and a switch to latch in case of all confirmed conditions
(18)1 digital measuring module of electrical parameters, DC and AC current and voltage, single and 3ph power, the module must be protected against overload and allow to reset values to zero(19)1 digital tachymeter up to 10000 rpm provided with connection cables, allows to measure speed by contact or without contact using sensor(20)1 set of couplings with protection accessories(21)2 frame for easy mounting of the machines. Each frame allow to install two machines, and should be equipped by vibration proof rubber supports Power supply box, AC 1ph & 3ph and DC outputs:- 01 output variable DC 0 to 230V / 10A min, with security socket and protected by circuit breaker- 01 output variable DC 0 to 230V / 1A for rotor excitation, protected by circuit breaker- 01 output variable AC 3ph, with protected sockets, 0 to 430V + N / 5A protected by circuit breaker- 01 output constant AC 3ph, with protected sockets, 400V + N / 10A protected by circuit breaker- 04 outputs at least on single phase sockets 230V + Ground, 16A protected by circuit breakerThe box must be protected by a differential circuit breaker with high sensibility, emergency push button and key switch. It should be also protected against DC motor run-away by general cut-off, a synoptic in front illustrate the cabling drawing and light indicators which indicate voltage presence
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
We have other laboratory as below
Electrical laboratory equipment,such as
PLC training workbench,
transformer training workbench,
AC machine training equipment,
DC motor trainer kit Mechatronics training equipment, such as
mechatronics training system modular product system 9 stations, robot arm trainer,
PLC electro pneumatic trainer,
electro hydraulic trainerThermal lab equipmentRefrigeration and air conditioning training equipment PCB lab equipment
Food Machine Trainer
Alamat:
Building No. 3 Double Innovation and Creation Industry Center, No. 803 Keyuan Road, High Tech Zone, Jinan, Shandong, China
Jenis Usaha:
Produsen/Pabrik
Jangkauan Bisnis:
Perlengkapan Kantor
Sertifikasi Sistem Manajemen:
ISO 9001
Pengenalan Perusahaan:
Jinan Minrry Technology Equipment Co.,Ltd yang didirikan tahun 2009, adalah pabrik pembuatan peralatan pendidikan, peralatan pelatihan kejuruan, peralatan kiliah. Minrry adalah perusahaan Shandong Provinial High Tech dan Innovation, dengan pengembangan diri dan tim insinyur riset, dengan pabrik mandiri seluas 5000 meter persegi.
Terakhir ISO9001, IS14001, OHSAS18001 sertificat.
Ekspor produk Mrry untuk lebih dari 100 negara.
Jajaran produk kami seperti belows:
Peralatan pelatihan listrik
Mechatronics Equipment
Fluid lab-lab peralatan
pelatihan Thermal equipment Thermal equipment
Thermal equipment equipment equipment equipment equipment equipment
equipment PCB Equipment PCB
Equipment milik perusahaan kami menawarkan berbagai produk yang dapat memenuhi berbagai kebutuhan Anda. Kita mematuhi prinsip manajemen "mutu pertama, berbasis pelanggan dan kredit", sejak perusahaan itu berdiri dan selalu melakukan yang terbaik untuk memenuhi kebutuhan pelanggan. Perusahaan kita dengan tulus berkeinginan untuk bekerja sama dengan perusahaan-perusahaan dari seluruh dunia untuk mewujudkan situasi yang menang-menang sejak tren globalisasi ekonomi telah berkembang dengan kekuatan yang tidak dapat menggiurkan.
