Pompa Vakum Seri XD-100 untuk Operasi Rumah Sakit RO

Operation:                                                                                                                           

1.The pump should be placed on the flat position horizontally. The pump has screw holes used for fixing the pump at the bottom cushion block.

2.Please check the oil level before starting the pump. Fill oil to the oil window 3/4 position.

3.Electrical wiring should be carried out by a professional electrician, Vacuum pump standard 380v50hz three phase motor, please look at the motor nameplate.After completion of three phase asynchronous motor wiring must rotate to check the motor,running in the direction shown by the arrow .

4.Inlet pipe cross section size should not be less than the suction mouth size and link length as short as possible.Otherwise it will affect the efficiency.

5.If the pumped gas have impurities,steam or foreign matter,you need to install a vacuum filter on pump air inlet. You also can join an exhaust pipe if necessary, the exhaust pipe need to slope down. 

6.The oil level must be check after startup,please insure the oil level in the oil window 3/4 place. When the pump is operating at high temperature, do not touch!
Advantages:    
 

1. Many rotary vane design, high efficiency and energy saving

2. Air inlet non-return valve design, can prevent oil

3. The built-in oil mist filter, exhaust clean and no pollution

4. Motor and pump direct drive, small vibration, low noise


Maintenance:      
Factory configuration oil - CV - AH200 high vacuum oil, must use the ISO VG 100 viscosity grade of vacuum pump oil, vacuum pump operation must ensure that the oil level in the oil window height of 1/2 3/4, regularly check the oil level and oil pollution, oil change.

Packing&Shipping: 

Packaging:

Standard export wooden cases packing

Shipment: 

Sea transport /Air transport ( DHL ,TNT , Fedex... )

Delivery time: 

15 working days

Why choose us? 
 

Our Service:

24-hours standby, Critical listening your every suggestion or demand and feedback ASAP.

Company Information
 

Wenling Shiqiao Vacuum Machinery Factory was established in 2001, specialized in producing TRD series direct vacuumpump, XD series single-stage vacuum pump, 2X series belt type vacuum pump, etc. 

Over the years, our company has been committed to producing high performance products. We are concerned with the design,development and production of vacuum pump. Our products are widely used in chemical industry, medicine,equipment leakage, vacuum packaging, vacuum heat treatment, vacuum coating and so on.We win high admiration and are widely trusted at home and abroad. 

Customers' satisfaction is our pursuance. We always uphold professional, performance, good quality and good faith to provide high quality products and services for customers. Our business objective is: "Quality First, the user is supreme."We will meet every challenge with our own wisdom and efforts. 

Excellent quality, perfect service is a bridge between us. We sincerely hope to advance hand in hand together with fellow merchants.

FAQ:   
 

a.When can i get the quotation?

We usually quote in 24 hours after we get your inquiry.

b.How can i get a sample to check your quality?

After price confirmation,you can require for samples to check our quality. If you need the samples, we will charge for the sample cost .But the sample cost can be refundable if your order is large enough.

c.How long can I expect to get the sample? 
3-5 working days for preparing samples.

d.What about the lead time for mass production? 

20-25 working days for mass production.It depends on your quantity,and we will try our best to meet your needs.

e.What is your terms of payment?
T/T,LC.