We elaborate every product to provide customers with the best service
MINAX Mesh 80/3: Most economical general surface support
For general large-surface ground support, MINAX replaces welded mesh sheets or heavy mild steel chain-link mesh as a light-weight solution. It offers superior strength with significantly less overlap loss and allows significantly shorter installation times. Designed specifically for the underground mining industry, MINAX 80/3 provides unparalleled quality through performance, durability and reliability - combined with maximum efficiency.
Tests conducted by the Western Australian School of Mines (WASM) have shown that high-tensile MINAX mesh with a wire tensile strength of at least 1,770 N/mm2 is able to withstand substantially higher static and dynamic loads than conventional reinforcement nets. This also enables higher levels of rockburst energy to be absorbed.
High-tensile steel wire mesh
Technical Data Sheet
European Technical Approval ETA-17/0115
| Mesh shape |
Rhomboid |
| Mesh width |
63mm,65mm,80mm |
| Wire diameter |
2.0mm,3.0mm,4.0mm,4.6mm |
| Tensile strength |
≥ 1'770 N/mm2 |
| Material |
high-tensile steel wire |
| Corrosion protection |
GEOBRUGG SUPERCOATING |
| Compound |
95% Zn / 5% Al |
| Coating |
min. 150 g/m2 |
| Roll width |
2.5mm,3.0m,3.5m,3.9m,as per site requirement |
| Roll length |
10m,20m,30m,as per site requirement |
| Mesh edges |
mesh ends knotted |
Pemasok yang Diaudit 
Pemasok yang Diaudit 
