Informasi dasar.
Tidak. Model.
22338CA/W33
Outer Dimension
Large (200-430mm)
Spherical
Aligning Bearings
Load Direction
Radial Bearing
Paket Transportasi
Wrapped Belt&Wooden Case
Spesifikasi
190x400x132mm
Deskripsi Produk
Bearing of this type has two rows of spherical rollers between the sphered raceway in the outer ring and two inner rings raceways inclined at an angle to the bearing axis.According to the difference of the bearing internal structure, there are five types of cages:CA,MA,CC,E and CTN1.Due to the arc center of the raceways in the ourter ring and the bearing center are in the same direction, as a result, shaft flexing and misalignment of the bearing seats are compensated. Bearings of this type can support axial forces in both directions and high radial forces. They are designed for very high load carrying capacity. Bearings with a tapered bore are also available with an adapter sleeve, locknut and tab washer or with a withdrawal sleeve.When shaft bends by force which causes the inclined between the center of inner ring and the center of outer ring,if the inclined degree not exceed 1-2.5,the bearing can work normally.This series is available in tapered bore - suffix "K" (taper 1:12).1) Suffix "W/33" - lubrication groove and holes in outer ring.2) C/3, C/4, and C/5 internal clearances are also availableBearing NO. | |
New : | 22338CA/W33 |
Old : | 53638KH |
Boundary dimensions(mm) | |
d : | 190 |
D : | 400 |
B : | 132 |
r 1.2min : | 5 |
Basic load ratings(kN) | |
Cr : | 1890 |
Cor : | 2590 |
Limiting speed(rpm) | |
Grease : | 900 |
Oil : | 1100 |
Abutment and fillet dimensions(mm) | |
da min : | 212 |
Da max : | 378 |
ra max : | 4 |
Value | |
e : | 0.34 |
Y1 : | 2 |
Y2 : | 2.9 |
Y0 : | 1.9 |
Weight (kg) | |
Refer : | 78 |
---222 series
---223 series
---230 series
---231 series
---232 series
---239 series
---240 series
---241 series
---BS2 series
---SB-222 series
---SB-223 series
Cage Available:CA,CC,MB,MA,E,E1?
Sealing Type:Open&sealed
Cage Material:Brass&pressed steel
Clearance:C0;C3;C4;C5
Tolerance:P0;P6;P5 Warehouse Bearing No. | Boundary Dimensions | Basic Loading(kN) | Limiting Speed(rpm) | Mass(kg) |
| dxDxB | Dy.(Cr) | Sta.(Cor) | Grease | Oil | |
23034CA/W33 | 170x260x67 | 555 | 1090 | 1600 | 2000 | 14.2 |
23034MB/W33 | 170x260x67 | 555 | 1090 | 1600 | 2000 | 14.2 |
23034CC/W33 | 170x260x67 | 555 | 1090 | 1600 | 2000 | 14 |
23134CA/W33 | 170x280x88 | 730 | 1390 | 1200 | 1600 | 26.1 |
23134MB/W33 | 170x280x88 | 730 | 1390 | 1200 | 1600 | 26.1 |
23134CC/W33 | 170x280x88 | 730 | 1390 | 1200 | 1600 | 25.6 |
23234CA/W33 | 170x310x110 | 1070 | 1930 | 950 | 1300 | 38 |
23234MB/W33 | 170x310x110 | 1070 | 1930 | 950 | 1300 | 38 |
23234CC/W33 | 170x310x110 | 1070 | 1930 | 950 | 1300 | 37.5 |
23934CA/W33 | 170x230x45 | 400 | 800 | 1800 | 2400 | 5.45 |
23334CA/W33 | 170x360x136 | 1420 | 2250 | 900 | 1200 | 68.7 |
23334MB/W33 | 170x360x136 | 1420 | 2250 | 900 | 1200 | 68.7 |
24134CA/W33 | 170x280x109 | 915 | 1830 | 1000 | 1400 | 24.8 |
24134MB/W33 | 170x280x109 | 915 | 1830 | 1000 | 1400 | 24.8 |
24134CC/W33 | 170x280x109 | 915 | 1830 | 1000 | 1400 | 24.1 |
24034CA/W33 | 170x260x90 | 705 | 1500 | 1000 | 1400 | 17.8 |
24034MB/W33 | 170x260x90 | 705 | 1500 | 1000 | 1400 | 17.8 |
24034CC/W33 | 170x260x90 | 705 | 1500 | 1000 | 1400 | 17.1 |
22234CA/W33 | 170x310x86 | 845 | 1450 | 1300 | 1700 | 26.8 |
22234MB/W33 | 170x310x86 | 845 | 1450 | 1300 | 1700 | 26.8 |
22234CC/W33 | 170x310x86 | 845 | 1450 | 1300 | 1700 | 26.1 |
22334CA/W33 | 170x360x120 | 1320 | 2120 | 950 | 1300 | 62.6 |
22334MB/W33 | 170x360x120 | 1320 | 2120 | 950 | 1300 | 62.6 |
22334CC/W33 | 170x360x120 | 1320 | 2120 | 950 | 1300 | 62.1 |
23036CA/W33 | 180x280x74 | 630 | 1280 | 1400 | 1800 | 17.7 |
23036MB/W33 | 180x280x74 | 630 | 1280 | 1400 | 1800 | 17.7 |
23036CC/W33 | 180x280x74 | 630 | 1280 | 1400 | 1800 | 17.4 |
23136CA/W33 | 180x300x96 | 900 | 1720 | 1100 | 1500 | 27.1 |
23136MB/W33 | 180x300x96 | 900 | 1720 | 1100 | 1500 | 27.1 |
23136CC/W33 | 180x300x96 | 900 | 1720 | 1100 | 1500 | 26.6 |
23236CA/W33 | 180x320x112 | 1160 | 2130 | 900 | 1200 | 38.7 |
23236MB/W33 | 180x320x112 | 1160 | 2130 | 900 | 1200 | 38.7 |
23236CC/W33 | 180x320x112 | 1160 | 2130 | 900 | 1200 | 38.4 |
23936CA/W33 | 180x250x52 | 430 | 830 | 1700 | 2200 | 7.34 |
23936CC/W33 | 180x250x53 | 430 | 830 | 1700 | 2200 | 7.34 |
24136CA/W33 | 180x300x118 | 1020 | 2030 | 900 | 1200 | 33 |
24136MB/W33 | 180x300x118 | 1020 | 2030 | 900 | 1200 | 33 |
24136CC/W33 | 180x300x118 | 1020 | 2030 | 900 | 1200 | 32.7 |
24036CA/W33 | 180x280x100 | 835 | 1750 | 950 | 1300 | 26.6 |
24036MB/W33 | 180x280x100 | 835 | 1750 | 950 | 1300 | 26.6 |
24036CC/W33 | 180x280x100 | 835 | 1750 | 950 | 1300 | 26.2 |
22236CA/W33 | 180x320x86 | 895 | 1550 | 1300 | 1700 | 29.4 |
22236MB/W33 | 180x320x86 | 895 | 1550 | 1300 | 1700 | 29.4 |
22236CC/W33 | 180x320x86 | 895 | 1550 | 1300 | 1700 | 29.1 |
22336CA/W33 | 180x380x126 | 1470 | 2400 | 900 | 1200 | 72.2 |
22336MB/W33 | 180x380x126 | 1470 | 2400 | 900 | 1200 | 72.2 |
22336CC/W33 | 180x380x126 | 1470 | 2400 | 900 | 1200 | 72 |
23038CA/W33 | 190x290x75 | 700 | 1450 | 1300 | 1700 | 17.3 |
23038MB/W33 | 190x290x75 | 700 | 1450 | 1300 | 1700 | 17.3 |
23038CC/W33 | 190x290x75 | 700 | 1450 | 1300 | 1700 | 17.1 |
23138CA/W33 | 190x320x104 | 975 | 1840 | 1000 | 1400 | 34.3 |
23138MB/W33 | 190x320x104 | 975 | 1840 | 1000 | 1400 | 34.3 |
23138CC/W33 | 190x320x104 | 975 | 1840 | 1000 | 1400 | 34 |
23238CA/W33 | 190x340x120 | 1290 | 2400 | 850 | 1100 | 44.8 |
23238MB/W33 | 190x340x120 | 1290 | 2400 | 850 | 1100 | 44.8 |
23238CC/W33 | 190x340x120 | 1290 | 2400 | 850 | 1100 | 44.4 |
23938CA/W33 | 190x260x52 | 550 | 980 | 1500 | 2000 | 8.32 |
23938CC/W33 | 190x260x52 | 550 | 980 | 1500 | 2000 | 8.01 |
24138CA/W33 | 190x320x128 | 1200 | 2400 | 850 | 1100 | 41.9 |
24138MB/W33 | 190x320x128 | 1200 | 2400 | 850 | 1100 | 41.9 |
24138CC/W33 | 190x320x128 | 1200 | 2400 | 850 | 1100 | 41.5 |
24038CA/W33 | 190x290x100 | 855 | 1840 | 950 | 1300 | 22.9 |
24038MB/W33 | 190x290x100 | 855 | 1840 | 950 | 1300 | 22.9 |
24038CC/W33 | 190x290x100 | 855 | 1840 | 950 | 1300 | 22.5 |
22238CA/W33 | 190x340x92 | 865 | 1620 | 1200 | 1600 | 37.4 |
22238MB/W33 | 190x340x92 | 865 | 1620 | 1200 | 1600 | 37.4 |
22238CC/W33 | 190x340x92 | 865 | 1620 | 1200 | 1600 | 37 |
22338CA/W33 | 190x400x132 | 1640 | 2630 | 850 | 1100 | 82.2 |
22338MB/W33 | 190x400x132 | 1640 | 2630 | 850 | 1100 | 82.2 |
22338CC/W33 | 190x400x132 | 1640 | 2630 | 850 | 1100 | 82 |
23040CA/W33 | 200x310x82 | 770 | 1560 | 1200 | 1600 | 22.6 |
23040MB/W33 | 200x310x82 | 770 | 1560 | 1200 | 1600 | 22.6 |
23040CC/W33 | 200x310x82 | 770 | 1560 | 1200 | 1600 | 22.1 |
23140CA/W33 | 200x340x112 | 1170 | 2240 | 950 | 1300 | 43.8 |
23140MB/W33 | 200x340x112 | 1170 | 2240 | 950 | 1300 | 43.8 |
23140CC/W33 | 200x340x112 | 1170 | 2240 | 950 | 1300 | 43.1 |
23240CA/W33 | 200x360x128 | 1360 | 2530 | 850 | 1100 | 53.4 |
23240MB/W33 | 200x360x128 | 1360 | 2530 | 850 | 1100 | 53.4 |
23240CC/W33 | 200x360x128 | 1360 | 2530 | 850 | 1100 | 53.1 |
23940CA/W33 | 200x280x60 | 495 | 1150 | 1600 | 2000 | 13.2 |
23940MB/W33 | 200x280x60 | 495 | 1150 | 1600 | 2000 | 13.2 |
23940CC/W33 | 200x280x60 | 495 | 1150 | 1600 | 2000 | 13 |
23340CA/W33 | 200x420x165 | 2020 | 3500 | 750 | 950 | 125 |
23340MB/W33 | 200x420x165 | 2020 | 3500 | 750 | 950 | 125 |
24140CA/W33 | 200x340x140 | 1630 | 2450 | 900 | 1200 | 53.5 |
24140MB/W33 | 200x340x140 | 1630 | 2450 | 900 | 1200 | 53.5 |
24140CC/W33 | 200x340x140 | 1630 | 2450 | 900 | 1200 | 53.1 |
24040CA/W33 | 200x310x109 | 985 | 2130 | 900 | 1200 | 31.3 |
24040MB/W33 | 200x310x109 | 985 | 2130 | 900 | 1200 | 31.3 |
24040CC/W33 | 200x310x109 | 985 | 2130 | 900 | 1200 | 31 |
22240CA/W33 | 200x360x98 | 1100 | 1950 | 1100 | 1500 | 44.7 |
22240MB/W33 | 200x360x98 | 1100 | 1950 | 1100 | 1500 | 44.7 |
22240CC/W33 | 200x360x98 | 1100 | 1950 | 1100 | 1500 | 44.1 |
22340CA/W33 | 200x420x138 | 1740 | 2860 | 850 | 1100 | 97 |
22340MB/W33 | 200x420x138 | 1740 | 2860 | 850 | 1100 | 97 |
22340CC/W33 | 200x420x138 | 1740 | 2860 | 850 | 1100 | 96.6 |
23044CA/W33 | 220x340x90 | 935 | 1900 | 1100 | 1500 | 32 |
23044MB/W33 | 220x340x90 | 935 | 1900 | 1100 | 1500 | 32 |
23044CC/W33 | 220x340x90 | 935 | 1900 | 1100 | 1500 | 31.7 |
23144CA/W33 | 220x370x120 | 1370 | 2710 | 900 | 1200 | 54.7 |
23144MB/W33 | 220x370x120 | 1370 | 2710 | 900 | 1200 | 54.7 |
23144CC/W33 | 220x370x120 | 1370 | 2710 | 900 | 1200 | 54.4 |
23244CA/W33 | 220x400x144 | 1720 | 3200 | 750 | 950 | 77.3 |
23244MB/W33 | 220x400x144 | 1720 | 3200 | 750 | 950 | 77.3 |
23244CC/W33 | 220x400x144 | 1720 | 3200 | 750 | 950 | 77 |
23944CA/W33 | 220x300x60 | 500 | 980 | 1520 | 1760 | 12.5 |
23944MB/W33 | 220x300x60 | 500 | 980 | 1520 | 1760 | 12.5 |
23944CC/W33 | 220x300x60 | 500 | 980 | 1520 | 1760 | 12.1 |
24144CA/W33 | 220x370x150 | 1920 | 3045 | 800 | 1000 | 67 |
24144MB/W33 | 220x370x150 | 1920 | 3045 | 800 | 1000 | 67 |
24144CC/W33 | 220x370x150 | 1920 | 3045 | 800 | 1000 | 66.6 |
24044CA/W33 | 220x340x118 | 1150 | 2500 | 850 | 1100 | 39.1 |
24044MB/W33 | 220x340x118 | 1150 | 2500 | 850 | 1100 | 39.1 |
24044CC/W33 | 220x340x118 | 1150 | 2500 | 850 | 1100 | 38.7 |
22244CA/W33 | 220x400x108 | 1350 | 2400 | 950 | 1300 | 63.5 |
22244MB/W33 | 220x400x108 | 1350 | 2400 | 950 | 1300 | 63.5 |
22244CC/W33 | 220x400x108 | 1350 | 2400 | 950 | 1300 | 63.1 |
22344CA/W33 | 220x460x145 | 2450 | 3130 | 800 | 1000 | 115 |
22344MB/W33 | 220x460x145 | 2450 | 3130 | 800 | 1000 | 115 |
22344CC/W33 | 220x460x145 | 2450 | 3130 | 800 | 1000 | 115 |
23048CA/W33 | 240x360x92 | 985 | 2080 | 1000 | 1400 | 34.2 |
23048MB/W33 | 240x360x92 | 985 | 2080 | 1000 | 1400 | 34.2 |
23048CC/W33 | 240x360x92 | 985 | 2080 | 1000 | 1400 | 34 |
23148CA/W33 | 240x400x128 | 1500 | 3000 | 850 | 1100 | 68.2 |
23148MB/W33 | 240x400x128 | 1500 | 3000 | 850 | 1100 | 68.2 |
23148CC/W33 | 240x400x128 | 1500 | 3000 | 850 | 1100 | 68 |
23248CA/W33 | 240x440x160 | 2080 | 3950 | 750 | 900 | 102 |
23248MB/W33 | 240x440x160 | 2080 | 3950 | 750 | 900 | 102 |
23248CC/W33 | 240x440x160 | 2080 | 3950 | 750 | 900 | 102 |
23948CA/W33 | 240x320x60 | 530 | 1310 | 1300 | 1700 | 15 |
23948MB/W33 | 240x320x60 | 530 | 1310 | 1300 | 1700 | 15 |
23948CC/W33 | 240x320x60 | 530 | 1310 | 1300 | 1700 | 14.7 |
24148CA/W33 | 240x400x160 | 1660 | 3400 | 800 | 1000 | 79 |
24148MB/W33 | 240x400x160 | 1660 | 3400 | 800 | 1000 | 79 |
24148CC/W33 | 240x400x160 | 1660 | 3400 | 800 | 1000 | 78.6 |
24048CA/W33 | 240x360x118 | 1240 | 2800 | 900 | 1200 | 46.5 |
24048MB/W33 | 240x360x118 | 1240 | 2800 | 900 | 1200 | 46.5 |
24048CC/W33 | 240x360x118 | 1240 | 2800 | 900 | 1200 | 46.1 |
22248CA/W33 | 240x440x120 | 1640 | 1820 | 850 | 1150 | 85 |
22248MB/W33 | 240x440x120 | 1640 | 1820 | 850 | 1150 | 85 |
22248CC/W33 | 240x440x120 | 1640 | 1820 | 850 | 1150 | 84.8 |
22348CA/W33 | 240x500x155 | 2480 | 3200 | 750 | 1000 | 150 |
22348MB/W33 | 240x500x155 | 2480 | 3200 | 750 | 1000 | 150 |
22348CC/W33 | 240x500x155 | 2480 | 3200 | 750 | 1000 | 149 |
Alamat:
Huangtai E-Commerie Industrial Park, Lishan Road, Lixia District, Jinan, Liaocheng, Shandong, China
Jenis Usaha:
Produsen/Pabrik, Perusahaan Perdagangan
Jangkauan Bisnis:
Mobil, Suku Cadang Motor & Aksesoris, Perlengkapan Industri & Komponen
Sertifikasi Sistem Manajemen:
ISO 9001
Pengenalan Perusahaan:
Shandong KYJEN Bearing Co., Ltd adalah stockis dan pemasok bearing industri. Produk mencakup lebih dari 0.1 juta item dengan jenis ball&roller bearing.
KYJEN bearing telah mendedikasikan untuk meningkatkan kinerja bearing dengan menyediakan produk kelas tinggi dan andal. Kami selalu ingat bahwa hanya kualitas yang sangat baik dan layanan yang cermat yang dapat membuat kami tetap hidup dan kuat dalam kompetisi ini.
Semua pabrik yang diaudit oleh Cbearing memiliki arti yang sangat penting untuk pengontrolan kualitas bearing. Bergabunglah bersama kami dan tingkatkan.
Produk pesaing:
Bantalan rol bulat, bantalan rol silindris, bantalan peluru taper, bantalan peluru kontak angular, bantalan bola dalam alur, bantalan rolling, bantalan dorong, bantalan non-standar...dll.
Selain itu, bantalan KYJEN mendistribusikan bearing merek dengan peringkat tinggi dunia, seperti TIMKEN NNTN KOYO...
dll.