Coating bubuk MDF Coating yang cepat sembuh Rendah untuk penggunaan perabotan

• CAS No: /
• Rumus: /
• EINECS: /
• Warna: Customized
• Tampilan: Bubuk
• Bahan mentah Utama: Polyester
• Tidak. Model.: XP-8474
• Metode: Semprotan
• Rata: Primer
• Sertifikasi: ISO14001, ISO9001
• Substrat: MDF Board
• Komponen: Pembuatan film penting
• Properti Film Cat: Cat menentang Paint
• Mekanisme Pembentukan: Bukan Tipe Konversi
• properti dasar: memulihkan yang cepat dan rendah
• aplikasi: perabot mdf, pajangan ritel, keluar kantor, e
• Paket Transportasi: 20kg/Box
• Merek Dagang: KINTE
• Asal: China
• Kode HS: 3907999990
• Kapasitas Produksi: 500 Tons Per Month

Deskripsi Produk

Fast Low Cure, Thermoset MDF Powder Coatings for Furniture Indoor Use


Introduction
This series of products is a powder coating suitable for medium-density fiberboard substrate (MDF) coating produced by special formula and production process. The coating film has excellent mechanical properties and decorative properties and can be widely used in the surface treatment of the modern furniture industry.
In recent years, due to the advantages of zero VOC emissions, powder coatings are a rapidly developing field in the coating industries, and their rapid development is driven by the current background of green environmental protection and sustainable development. At the same time, with the successful development of low-temperature curing (120-140ºC) powder coatings and the innovation of IR curing methods, powder coatings for MDF are in the stage of rapid development.
The low thermal conductivity of MDF determines that the traditional heating method is not suitable for the curing of powder coatings, while the infrared radiation technology penetrates the surface layer of the powder and simultaneously heats the inner layer of the powder, uniformly and rapidly heating the inner and outer layers of the powder, which can effectively shorten the curing time. According to the functional analysis of infrared wavelengths, mid-wave infrared can provide the energy required for powder curing without damaging the substrate, and is suitable for the curing of powder coatings for MDF.


Recommended Application:
For MDF furniture and hardware finishes, such as commercial furniture, residential furniture, retail displays, office fit-outs, kitchen, and bath cabinets, etc.


Advantages:
High utilization rate during construction
There is no three waste problem, which meets the needs for environmental protection
Lower cost than traditional painting and molding processes
The adaptability to the product shape is stronger than that of the molding process, and a large-scale industrial production method can be adopted.
Excellent surface stain resistance, high hardness, scratch resistance, and other properties
Diverse surface effects, excellent UV resistance
Low curing temperature for saving energy
Excellent mechanical properties and chemical resistance


Technical Data:

PROPERTY	TEST METHOD	RESULT
Gloss	ASTM D-523-94	15~25 (GU)
Adhesion	ASTM D-3359-97	100% (5B Pass)
Hardness	ASTM D-3363-92a	≥2H Pencil (Eagle)
Impact Resistance	ASTM D-2794-93	160 In-Ib. Direct

Specifications

Application Type:	Electrostatic Spray (50-80Kv)
Recommended Bake:	10 Minutes at 140ºC Temperature
VOC:	Essentially Zero
Specific Gravity:	1.1~1.7 g/cc
Theoretical Coverage:	9~12m^2/Kg (Film thickness 70±5μm)

Storage Requirements    
Store in a ventilated, dry and clean room below 25ºC, keep away from fire, and heating, avoid direct sunlight, and strictly prohibit open-air stacking. The powder is stable in storage for 6 months under these conditions. If the storage period is exceeded, the test can be re-inspected. If the result meets the requirements, it can still be used.


Health and Safety    
This powder coating is a non-toxic product, but inhalation of dust should be avoided during use. It is recommended that operators wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between the skin and the powder coating, and the coating attached to the skin can be washed with soap.


Package and Transportation
The net weight of carton packaging is 25kg or 20kg.
It is not a hazardous article, so it has no specific transportation requirement.





Company Profile:
Kinte Materials Science and Technology Co., Ltd. is subordinate to China Machinery Industry Corporation (a key state-owned enterprise directly managed by SASAC, ranking 284 among the world's top 500 in 2021). It is a national high-tech enterprise under China National Electric Apparatus Research Institute Co., Ltd. (Stock Code: 688128), a listed enterprise on the SSE STAR MARKET. Focusing on the R & D, production, and sales of environmentally friendly coatings (powder coatings, waterborne industrial coatings) and powder coating resins, the company is committed to improving the global market competitiveness of China's environmentally friendly coating industry. Now it has become the leader and promoter in China's technological development of environmentally friendly coatings as well as polyester resins for powder coatings!

We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification, and QUALICOAT Certificates. Due to the excellent and stable quality, our products always enjoy a high reputation at home and overseas, and were sold to more than 30 countries.

The powder coating branch was founded in 1992, and now there are two factories (the Guangzhou factory and the Wuhan factory) with an annual production capacity of over 25,000 tons. And we have cooperated with many famous clients such as Gree, Pansonic, HITACHI, Mitsubishi, Walmart, HUAWEI, EMERSON, Hisense, Dicastal, BYD, AAG, etc.

We unremittingly stick to the business principle of "Quality is the life, adhere to first-class technology, first-class quality, first-class cost, and first-class brand". We would like to provide a complete set of services and solutions for both domestic and abroad customers and would like to go forward to a brilliant future with you together.