After-sales Service: | Change Against Defect or Technical |
---|---|
Warranty: | 1 Year |
Koneksi: | Pengelasan |
Bentuk: | Sama |
Kode Kepala: | Bundar |
Sudut: | 90 Derajat |
Pemasok dengan izin usaha terverifikasi
Kelas | C | MN | P | S | Si | CR | MO |
WP11 CL1 | 0.05-0.15 | 0.30-0.60 | 0.03 | 0.03 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
WP11 CL2/3 | 0.05-0.20 | 0.30-0.80 | 0.04 | 0.04 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
Persyaratan tensil | WP11CL1 | WP11CL3 |
Kekuatan tensil, min, ksi[MPa] | 60-85 | 75-100 |
(0.2% offset atau 0.5% ekstensi-di bawah-beban) | [415-585] | [520-690] |
Kekuatan hasil, min, ksi[MPa] | 30 | 45 |
[205] | [310] |
Spesifikasi Kelas | Chrome Moly tingkat P1, P5, P9, P11, P22, 91 |
Spesifikasi | ASTM/ ASME A/SA234 WP1, WP5, WP11, WP11, WP22, WP111 |
Tipe | Mulus / dilas / Difabrikasi / tempa |
Radius Meliuk | R=1D, 2D, 3D, 5D, 6D, 8D, 10D atau Kustom |
Rentang | ½" NB hingga 48 NB L pada SCH 10s, 40s, 160s, XXS. |
Dimensi | ANSI/ASME B16,9, B16,28, MSS-SP-43. |
Standar yang berlaku | 1-ASME B 16.9 untuk lubang besar 2-ASME B 16.11 untuk lubang kecil (soket dilas) 3-ASME B 16.25 untuk dilas punggung 4-ASME B 16.28 untuk radius kecil siku |
Akhiri persiapan: |
|
Pemasok dengan izin usaha terverifikasi