Five Claw Compression Testing Machine
Introduction:
1. Test purpose: To evaluate the compression strength of office chair legs, to control the quality of the product, to find out the location of defects and to provide reference for improvement.
2. Test procedure: Slowly load to 11120 Newton, hold for 1 minute, unload; then slowly load again to 11120 Newton, hold for 1 minute, record the test procedure.
3. Evaluation of results: Servo motor control, able to maintain a constant pressure on the chair foot at all times in a plastic deformation state.
Function:
1. Automatic stop at break point
2. Fully automatic computer operation, customer can write their own test program; computer automatically generates force-time force-displacement curve
Technical Specification:
| Max. pulling load element LOAD |
5 tons |
| Test space |
Test width approx. 1000 mm. |
| Resolution |
1/100,000 |
| Unit switching |
All common international units can be switched at will |
| Pulling pressure accuracy range |
±1/10000 |
| Office chair foot pressure tester test speed |
computer-controlled non-stage volume, maximum speed 0.01~300mm/min |
| Displacement decomposition degree |
0.001mm |
| Can do stress, strain, and display the curve, holding pressure, tension |
| Size of lower platen |
900*900mm |
| Effective space between upper and lower platen |
900mm, protective cover around |
| Protective device |
1. With up and down stroke control switch, programmable maximum load, maximum extension, automatic stop emergency switch.
2. The drive motor is a servo motor, completely controlled by computer for speed and travel, unlike traditional AC and DC motors which are controlled by voltage and need to be controlled in different sections. |
| Protective cover |
| Weight |
approx. 265 kg |
Production characteristics:
| Transmission coupling plate |
Forged of high carbon steel, with good mechanical strength properties and no variation in the amount of travel. |
| Drive screw |
Tempered with SUS high carbon steel, TM55 x 5 accuracy, trapezoidal screw. |
| Fixture treatment |
All fixtures are treated with hard chrome plating. hrc55 or above. |
| Guide bar |
Made by two Φ50 Korean Taekyung guide rods with high frequency and hard chrome plating treatment on the surface, HRC60 or above. |
| Active bearing |
Adopted Japan NSK high carbon bearings. |
| Drive Chain |
Made of Carbon steel 5 points double row chain drive. |
| Body structure |
Adopt the split design of main frame and control box. |
| Speed Reducing Device |
Italian Ortes precision hollow cast aluminium reducer I=1:40. |
| Dust protection device |
Adopting Taiwan dustproof cover to protect the filament rod from dust to ensure the life and accuracy of the filament rod. |
| Surface treatment of the machine body |
Adopt American Dupont powder, electrostatic spray painting process, by high temperature 200 ºC curing to ensure that the colour will not fade. |
| Total weight |
about 800KG. |
| Total power supply |
1.5KW AC220V 50H |
Product Show:
Advantage:
Ø 24 hours online
Ø10years experiences
Ø Best price, fast delivery
Ø OEM,ODM
ØGet dozens of national patent technology !
ØThe introduction of advanced production equipment through international certification quality assurance.
ØPerfect after-sales service system, to provide you with professional technical support !
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Information:
Dongguan Kexun Precision Instrument Co., Ltd. specializes in research and development, production, sales, repair, maintenance, technical services, equipment import and export and integration companies. Main products, quality department, laboratories, testing centres, universities and colleges laboratory, scientific research units with reliability testing instruments and equipment, high and low temperature humidity and heat test chamber, constant temperature and humidity test chamber, cold and heat shock test chamber, rapid temperature and humidity test chamber, salt spray tester, xenon lamp weathering test chamber, sand and dust test chamber, ultraviolet weathering test chamber, rain test chamber, dust test chamber, aging test chamber, walk-in aging Laboratory, aging room, tensile testing machine, compression testing machine, vibration test bench, plugging and unplugging testing machine, breaking strength testing machine, thrust tester, etc. Products meet the standard! Welcome to consult!
Packaging & Shipping:
1. Strong standard wood case, inner plastic films wrapped for high low temperature thermal shock test machine/thermal shock impact test chamber
2. Usually we delivery the equipment by air,by sea or by express. it depends on customer.
FAQ
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
A: Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2. What's the delivery term?
A: At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the machine?
A: Yes, of course. We can not only offer standard machines, but also customized
machines according to your requirements. And we can also put your logo on the machine.
4. How to install and use the product?
A: We will send you operating instructions, English video by Email. Or you can download on our officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
Pemasok yang Diaudit 
