Katup Mengambang katup Mengambang Bor Tipe F, dan Tipe rapi G, GA dengan Kit Perbaikan

• After-sales Service: Online Services
• Warranty: One Year
• Manufacturing Process: Forging
• Surface Treatment: Polishing
• Operation Pressure: Atmospheric Pressure
• Material: Cast Steel
• Tidak. Model.: All models
• nama produk: katup float pipa bor, atau katup non-balik
• perbaiki kit: karet, logam, pegas, pengarah katup, seal, dll..
• tipe: katup pelampung melayang, tipe f, flap g, dan tipe ga
• gunakan: adalah katup pengaman lubang bawah
• Paket Transportasi: Wooden Box
• Spesifikasi: 1R, 1F-2R, 2F-3R, 3F, 4R, 4F, 5R, 6F
• Merek Dagang: JX petro
• Asal: China
• Kode HS: 84314310
• Kapasitas Produksi: 10000PCS/Months

Deskripsi Produk

1R, 2F-3R, Drill Pipe Float Valve Plunger Type F, and Flapper Type G, GA for pressure monitoring with repair kits API standard

Product Description

Drill pipe float valves, or non-return valves, are downhole safety valves that create barriers to prevent unwanted flow of fluids up the drill string. The valve locks down the flow of fluids while the crew at the rigfloor is making or breaking connections.

The Model F Plunger Type Valve provides positive and instantaneous shut off against high and low pressure, assuring continuous control of fluid flow during drilling. For normal drilling operations, the durable Model F is the most economical choice and is available in all sizes. The "Heavy Duty" Model F Drill Pipe Float Valve is designed with a low alloy steel body that increases the life of the Drill Pipe Float Valve. It provides high impact resistance and is dimensionally identical to the standard Forum Drill Pipe Float Valve, allowing interchangeability of the trim. This type of Drill Pipe Float Valve is recommended for use with downhole mud motors.

 

The Model G "Flapper Type" Full Open Valve incorporates a specially designed flapper which opens quickly and fully to provide a completely unrestricted bore through the valve. The Model G is especially good for use with highly abrasive fluids. When circulation stops, the flapper closes instantly to prevent cuttings from entering the drill string and plugging the bit. The valve opens when the first joint is raised out of the hole assuring the first joints drain and are not pulled wet. The flapper-type valve complements primary blowout prevention equipment to provide complete internal pressure control.

 

The Model GA Differentail Pressure Monitoring Valve is identical to the Model G except for a hardened1/4 in. diameter tungsten carbide orifice bean insert in the flapper to provide automatic partial filling of the drillpipe during running in. This valve is used when monitoringthe bit head for gas pressure and/or gas pockets, allowing measurement of differential pressure when required.

 

Detailed Photos

 

Product Parameters

VLVE SIZE	D	R	L	T''	Model F	Model G
	Diameter of Valve	(D Plus 1/32)	Length of Valve	Diameter	ID	ID
		Diameter Recess for Valve		Of Recess for Baffle Plate	Of Valve	Of Valve
1R	1-21/32	1-11/16	5-7/8	1-5/16	1	N/A
1F-2R	1-29/32	1-15/16	6-1/4	1-1/2	1-1/4	1
2F-3R	2-13/32	2-7/16	6-1/2	1-29/32	1-9/16	1-1/4
3F	2-13/16	2-27/32	10	2-7/16	1-7/8	1-5/8
3-1/2-1F	3-1/8	3-5/32	10	2-11/16	1-7/8	1-5/8
4R	3-15/32	3-5/32	8-5/16	2-15/16	2-5/16	1-31/32
5F	3-21/32	3-1/2	12	3-1/4	2-1/2	2-3/16
5R	3-7/8	3-29/32	9-3/4	3-3/8	2-3/4	2-1/4
5F-6R	4-25/32	4-13/16	11-3/4	4-9/32	3-1/4	2-7/8
6F	5-11/16	5-23/32	14-5/8	5-3/16	4-1/8	N/A

 

Company Profile

 

FAQ

1) How can I place an order?

A: You can contact us by email about your order details, or place an order online.

2) How can I pay you? 

A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are used. 

3) What's the order procedure?

A: First we discuss order details and production details by email or TM. Then we issue you a PI for your confirmation. You will be requested to do a prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. 

4)How do you take care when your clients received defective products?

A: replacement. If there are some defective items, we usually credit them to our customer or replace them in the next shipment. 

5)How do you check all the goods in the production line?

A: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure.