Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit The liner of the mud pump is an important and easily worn part of the hydraulic end of the mud pump. The service life of the liner of the mud pump directly affects the service life of the mud pump. When the cylinder liner works, the piston makes high-speed reciprocating motion on its surface, which determines that the cylinder liner must not only have sufficient strength and rigidity, but also be resistant to high temperature, corrosion and wear. Our main products are single metal, bimetal and ceramic cylinder liners, with reliable and stable quality and preferential prices
single metal cylinder
After carburization and high-frequency treatment, the hardness of single metal cylinder liner can reach HRC58-62. It has the characteristics of high finish, wear resistance, corrosion resistance and long service life. It is suitable for use in milder corrosive mud
Bimetal cylinder liner:
Bimetal cylinder liner combines the advantages of hot forged high wear outer sleeve and high chromium wear-resistant and corrosion-resistant inner sleeve. The outer sleeve is made of high-quality carbon steel by hot pressing at one time, and the inner sleeve is made of high chromium cast iron by centrifugal casting. The outer sleeve has a tensile strength higher than 900000psi, and the hardness of the inner sleeve after heat treatment reaches more than HRC62, which can withstand 7000psi mud pressure, and the normal service life can reach more than 800 hours.
Ceramic cylinder liners
Ceramic cylinder liners are made of zirconia, zirconia toughened alumina (ZTA) and high-performance a-99 alumina ceramics. Its raw materials are high-purity nano zirconia and alumina powder, which are formed by advanced cold pressing process, high-temperature sintering, assembly, and finally high-precision grinding and polishing. It has high flexural and tensile strength, high fracture toughness and acid and alkali corrosion resistance. the normal service life can reach more than 4000hours.
| Types of Mud Pump Liner | Bi-metal | Chrome Plated | Ceramic |
| Description | Hy-chrome inner Sleeve and Forged Steel outer Hull | Core plated by Chrome | Ceramic Zirconia |
| Material | AISI 1045/ | AISI 1045 | AISI 1045 |
| ASTM A532M | Chrome-plated bore | Zirconia-based Ceramic | |
| Hardness | HRC 60~65 | HRC 58~62 | HRC 68-72 |
| Normal Service Life(Hr) | 800 | 400-600 | 2000~4000 |
| Liner are available for the following Mud Pump | ||||||||
| BOMCO | F-500 | F-800 | F-1000 | F-1300 | F-1600 | F-1600HL | F-1600L | F-2200HL |
| LS | 3NB500C | 3NB1000C | 3NB1300C | 3NB1600 | 3NB800 | |||
| QINGZHOU | SL3NB-1300A | QZ--1000 | QZ-500 | QZ-350 | QZ800 | SL3NB-1600 | ||
| EMSCO | F-500 | F-800 | F-1000 | F-1300 | F-1600 | FD-1000 | FC-2200 | FB-1300 |
| Gardner Denver | PAH | PZ7 | PZ8/9 | PZ10/11 | ||||
| Drillmec | 7T450 | 7TS600 | 9T1000 | 9T1300 | 12T1600 | 14T2200 | ||
| National | 7-P-50 | 8-P-80 | 9-P-100 | 10-P-130 | 12-P-160 | 14-P-200 | 14-P-220 | |
| Oilwell | A-850-PT | A-1100-PT | A-1400-PT | A-1700-PT | ||||
| RUSSIAN | 8T-650 | UNB600 | UNBT600 | UNBT950 | UNBT1180 | |||
| IDECO | T-500 | T-800 | T-1000 | T-1300 | T-1600 | |||
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
