Type: | Lithium Metal Battery |
---|---|
Cathode Material: | LFP |
Rechargeable: | Yes |
Size: | Small |
nama: | baterai/baterai lfp/baterai lithium/li ion |
kelas: | kelas a |
Pemasok dengan izin usaha terverifikasi
Item | Specification | |
1 | Cell Type | Lithium -ion Cell |
2 | Cell Model | EKS3.2-40 |
3 | Nominal Capacity☆ | 40.0Ah |
4 | Average Working Voltage☆ | 3.2V |
5 | AC-impedance☆ | ≤ 1.0mΩ |
6 | Weight | 1010±20g |
7 | Maximum Charge Current | 3C (Continuous) 4C (50%S0C, 30s) |
8 | Charging End Voltage | 3.65V |
9 | Maximum Discharge Current | 5C(Continuous) 6C (50%S0C, 30s ) |
10 | Discharge End Voltage | 2.0V(1C) |
11 | Max Operating Temperature Range | -20ºC / +60ºC |
Charge | 0ºC ~ 45ºC | |
Discharge | -20ºC ~ 60ºC | |
12 | Optimal Operating Temperature Range | |
Charge | 15ºC ~ 35ºC | |
Discharge | 15ºC ~ 35ºC | |
13 | Storage Temperature | -40ºC / +60ºC |
1 month | -40ºC~ 45ºC | |
6 months | -20ºC ~ 35°C | |
*Cells should be stored at the voltage is between 3.275V and 3.305V(20%~40%SOC); | ||
Item | Specification | |
1 | Cell Type | Lithium -ion Cell |
2 | Cell Model | EKS3.2-50 |
3 | Nominal Capacity☆ | 50.0Ah |
4 | Average Working Voltage☆ | 3.2V |
5 | AC-impedance☆ | ≤ 1.0mΩ |
6 | Weight | 1110±20g |
7 | Maximum Charge Current | 1C (Continuous) 2C (50%S0C, 30s) |
8 | Charging End Voltage | 3.65V |
9 | Maximum Discharge Current | 2C(Continuous) 4C (50%S0C, 30s ) |
10 | Discharge End Voltage | 2.0V(1C) |
11 | Max Operating Temperature Range | -20ºC / +60ºC |
Charge | 0ºC ~ 45ºC | |
Discharge | -20ºC ~ 60ºC | |
12 | Optimal Operating Temperature Range | |
Charge | 15ºC ~ 35ºC | |
Discharge | 15ºC ~ 35ºC | |
13 | Storage Temperature | -40ºC / +60ºC |
1 month | -40ºC~ 45ºC | |
6 months | -20ºC ~ 35°C | |
*Cells should be stored at the voltage is between 3.275V and 3.305V(20%~40%SOC); |
1. In-production Inspection. The coating of the materials must be inspected strictly one by one to make sure all coatings are even and no defects. The thickness and weights of the coating must be sampled and measured every 10mins to make sure the consistency of the finished coatings.
Q: Could you provide OEM service?
Pemasok dengan izin usaha terverifikasi