Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
| Model | ZZ3257N3447A1 Driving type: 6*4 left hand driving | |||||
| Engine | Make: SINOTRUK | |||||
| Diesel 4-stroke direct injection diesel engine | ||||||
| Engine model: WD615.69,/WD615.47 Euro II emission standard | ||||||
| 6-cylinder in-line with water cooling, turbo-charging and intercooling | ||||||
| Maximum output: 336 hp (247 Kw) at 2200 rpm /371hp | ||||||
| Maximum torque: 1350 Nm at 1300-1600 rpm | ||||||
| Number of cylinder: 6 | ||||||
| Displacement: 9.726 L | ||||||
| Bore: 126 mm | ||||||
| Stroke: 130 mm | ||||||
| Specific fuel consumption: 195 g/kWh | ||||||
| Engine oil filling quantity: 19 l | ||||||
| Cooling system filling quantity (long-term filling): 40 l | ||||||
| Thermostat with 71ºC opening begin | ||||||
| Twin cylinder air compressor | ||||||
| Rigid fan | ||||||
| Transmission | HW19710, 10 forwards and 2 reverse | |||||
| Ratio: 14.28 10.62 7.87 5.87 4.375 3.26 2.43 1.8 1.34 1 13.91(R1) 3(R2) | ||||||
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |||||
| Front Axle | HF9, Steering with doubleT-cross section beam | |||||
| Rear Axle | HC16, Pressed axle housing, central single reduction with hub reduction and with differential locks between wheels and axles . | |||||
| Ratio:5.73 Option: 6.72 | ||||||
| Chassis | Frame: U-profile parallel ladder frame with section of 300x80x8mm, and reinforced subframe all cold riveted cross members | |||||
| Front suspension:10 semi-elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer | ||||||
| Rear suspension:12 leaf semi-elliptic springs, bogie spring and stabilizer | ||||||
| Aluminium fuel tank: 300 L capacity with locking fuel cap, fitted to the off side of the chassis | ||||||
| Steering | ZF power steering, modol ZF8118, hydraulic steering with power assitance | |||||
| Brakes | Service brake: dual circuit compressed air brake | |||||
| Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels | ||||||
| Auxiliary brake: engine exhaust brake | ||||||
| ABS control system: for option | ||||||
| Wheels & Tyres | Rims: 8.5-20, 10 hole-steel | |||||
| Tyres: 12.00R20, option: 12.00R22.5 Nos: 10+1(spare) | ||||||
| Driver's Cab | HW76, HOWO long cab, with two seats, one bed, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn,air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber | |||||
| Electrics | Operating voltage: 24 V, negative grounded | |||||
| Starter: 24 V, 5.4 Kw | ||||||
| Alternator: 3-phase, 28 V, 1500 W | ||||||
| Batteries: 2 x 12 V, 165 Ah | ||||||
| Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | ||||||
| Instrument Panel | Active check central controllor with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators | |||||
| of compressed air pressure, coolant temperature, engine oil pressure and battery charging | ||||||
| Dimensions mm | Wheel base | 3625+1350 | ||||
| Front wheel track | 2022 | |||||
| Rear wheel track | 1830 | |||||
| Front overhang | 1500 | |||||
| Rear overhang | 1670 | |||||
| Approach angle (0) | 19 | |||||
| Departure angle (0) | 26 | |||||
| Overall length | 8145 | |||||
| Overall width | 2496 | |||||
| Overall height | 3386 | |||||
| Dimension of the rear dump body | 5400*2300*1400 | |||||
| Type of hoist system | Underbody "T" shape | |||||
| Weight kg | Dead weight | 12420 | ||||
| Gross vehicle weight | 41000 | |||||
| Front axle loading capacity | 9000 | |||||
| Rear axle loading capacity | 2*16000 | |||||
| Performance | Maximum driving speed (km/h) | 75 | ||||
| Maximum gradeability (%) | 32 | |||||
| Minimum ground clearance (mm) | 298 | |||||
| Fuel consumption (l/100 km) | 38 | |||||
| The manufacturer reserves the right of technical alteration/change for better improvement without prior notice! | ||||||
1, Q: What kind of payment do you accept?
A: We accept T/T payment, 30% deposit and 70% balance.
2, Q: What's your min. order quantity?
A: One set.
3, Q: What's your delivery time?
A: It depends on sepcific model, normally within 30 days.
4, Q:How about the service?
A: Online service, Wechat/whatsapp, etc.
5, Q: Can you do OEM?
A: Yes, we could print your logo according to your requirement.
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
