Perangkat Garmin Pelacak GPS Lora untuk Pelacakan Aset

AN-122 GPS LoRa Sensor for valuable asset tracking
 
Profile
AN-122 LoRa+GPS tracker is based on standard LoRaWAN TM protocol for assets tracking, with built-in GPS, G-sensor, anti-tilt switch detection sensor and switching power supply module. When there is a moving for the device, you'll get the GPS location information, as well as an automatic alarm. It is in small size with built-in rechargeable lithium battery. Easy installation makes it meet customers' needs in different application scenarios, such as assets tracking, smart animal farming, IoT finance tracking.
 
 
 Features:
 
²Support LoRa RF data transmission;
²Support GPS positioning with accuracy of within 5 meters;
²Built-in G-sensor, support moving object detection
²IP66 weatherproof
² Wide working temperature range - 30 ºC to + 80 ºC;
² Support person or object anti-theft tracking;
² Built-in anti-tilt switch detection sensor to detect illegal moving o
²Built-in rechargeable battery
²Low power consumption
 
Turn on: Short press the on/off button, and about 2 seconds later, the green LED will be on, indicating the device powered on
 
Turn off: Press the on/off button for about 4 seconds, and green LED will be on and then off, indicating the device powered off
 
Charging connector: Magnetic charging
 
Charging power indicator: Red light
When the charging connector is connected, the light will be on, and the light will be off if not connected.
 
Charging status indicator: Blue light 
When charging, it'll be on; when charging completed, it'll be off;
 
Working status indicator: Green light
When it flashes, that means the device is working (interval of 20 seconds/time, customizable)
 
 
Specification:
  
 
Calibration before delivery

Each sensor is calibrated before delivery. 
 
 
Trouble shooting:
 
1. Device can't join network?
Please check whether the device is powered on.
2. Device can't be turn off?
Press the on/off button for about 4 seconds until the green indicator is off, and after that you'll see that the green indicator will flash one time, that means the device is turn off
 
3. Device alarm is triggered?
The field environment is complex, which may cause the device alarm to be triggered accidentally, then you can increase the threshold value of acceleration sensor; On the contrary, if the device is not easy to trigger when it's moved, you can decrease the threshold value of the acceleration sensor.
 
4. Problem of high packet loss rate?
Reconfigure the product and increase repetition of re-transmission