Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 10 Ton Double Beam Remote Control Grab and Magnetic EOT or E.O.T Crane
Product description of QP Type double girder overhead crane
Double Girder Grab,Bucket,Grapple and Magnet, Magnetic,Electromagneticchuck two purpose EOT crane ,Electric Overhead or Bridge Traveling Crane is widely used to transport, assemble, load and unload incompact goods in mine, port, factory, workshop, warehouses, and goods yard, etc. Grab,Bucket,Grapple open direction is divided into parallel and vertical with main beam with Magnet,Magnetic,Electromagnetic Chuck and the grab can be double or four wire rope, mechanical or electric hydraulic type according to different work duty and materials.
Product picture:
Features:
1. Two lifting mechanism, one is for the grab, bucket, grapple; the other is for magnet, magnetic, electromagnetic plate.
2. Simple structure in linear type, easy in installation and maintain.
3. Heavy duty, soft start, 3-5 speeds to operate, very stable to lift and running.
4. Strong box type steel structure.
5. Full safety system as follows:
Weight overload protection; Emergency stop system; Over current protection, Short-circuit protection; Phase sequence protection; Zero position protection; Voltage loss protection; Limit switch and stopper for crane long traveling and cross traveling; Lifting overhigh and overlow limit switch Six direction movement.
Safety protection system
1. Overload protection in the event of overload, the hoist unit switches off and only the lowering motion is possible
2. Long and cross travel limited by means of preliminary and final limit switches or Wireless anti-collision device
3. Anti-falling protection for the Three-in-One electric motor of trolley and crane prevents from accidental falling
4. All movements can be switched off by actuating the emergency-off switch at the control station via a main contact
5. High quality long time bearing polyurethane materials buffer fixed at the end of trolley travelling and crane travelling to prevent over traveling
6. Safety hook latch used for avoiding the lifted material out off from the hook
7. Audible and visual alarm device to inform the person stay near by the travelling crane.
8. Rain Cover for lifting mechanism of outdoor cranes, electric cabinet and driving mechanism
9. Protective earth conductor is fitted as standard
10. Voltage lower protection system
11. Current overload protection system
Technical Parameters
| QP Grab and Magnet Overhead Crane | |||||
| Lifting Capacity | 5/5 Ton | 10/10 Ton | 16/16 Ton | ||
| Span M | 10.5-31.5 | ||||
| Working Duty | ISO A6 & FEM 3m | ||||
| Lifting height | Grab | 20 | 18 | 22 | |
| Magnet Chuck | 16 | 22 | 22 | ||
| Speed m/min | Lifting | Grab | 40.1 | 40 | 41.8 |
| Magnet Chuck | 15.6 | 10.4 | 13 | ||
| Trolley travelling | 37.2 | 43.8 | 44.6 | ||
| Bridge travelling | 93.7 | 76 | 75.3 | ||
| Motor | Lifting | Grab | YZR225M-8/22 | YZR225S-10/37 | YZR315M-10/75 |
| Magnet Chuck | YZR180L-6/15 | YZR200L-6/22 | YZR225M1-6/37 | ||
| Trolley travelling | YZR225M-8/22 | YZR225M-8/22 | YZR225M-8/22 | ||
| Crane travelling | YZR160M-6/7.5*2 | YZR160L-6/11*2 | YZR160L-6/11*2 | ||
| Weight | Trolley | 8.4Ton | 13.3 Ton | 21.2 Ton | |
| Total Weight | 24.7~45.7 Ton | 29.3~51.2 Ton | 24.5~74.2 Ton | ||
| Power Source | 220V,380V,400V,415,440V,50 or 60HZ,3 Phase | ||||
Sketch Drawing
Product Details
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
