Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit
|
front axle
|
VGD75 front axle (drum) 7.5 ton front axle
|
|
rear axle
|
MCX16ZG double (drum) rear double bridge
|
|
gearbox
|
SINOTRUK 10-speed gearbox
HW19710+HW70 flange power take-off |
|
vehicle rack
|
Second floor beam 300+ (8+5)
|
|
tire
|
10+1 12R22.5 tubeless tires
|
|
Power take-off interface
|
have
|
|
Pump
|
Medium and low pressure pump
|
|
PTO
|
have,HW70 flange power take-off
|
|
Front/rear overhang (mm)
|
Front: 1500, Rear: 2655
|
|
departure angle
|
Front: 16, Rear: 11
|
|
suspension
|
Leaf spring10/12
|
|
leaf spring
|
First 10, last 12
|
|
Number of axles
|
3
|
|
Wheelbase (mm)
|
4625+1350
|
|
Number of tires
|
10+1
|
|
Wheelbase (mm)
|
2022/1860/1860
|
|
Drive type
|
6*4
|
|
engine
|
WP10.340E22
|
|
Emission Standards
|
Euro 2
|
|
suspension
|
leaf spring
|
|
driving style
|
Steering wheel/left-hand drive
|
|
brake
|
Drum type
|
|
Braking System
|
Air cut-off brake
|
|
Spare tire rack
|
have
|
|
light
|
have
|
|
Voltage
|
24V
|
|
tank
|
400L fuel tank
|
|
structure
|
The main frame structure is welded with high-quality square tubes, and the exterior decorative panels are welded with carbon steel plates. The roof is anti-slip and can be walked on.
|
|
Equipment box
|
The equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling shutter doors on both sides and lights inside. Storage boxes are provided in the equipment box room according to needs.
|
|
pump room
|
The pump room is located at the rear of the vehicle. There are aluminum alloy rolling shutter doors on both sides and the back.There are lights inside. Some commonly used equipment can be placed on both sides of the pump room.
|
|
Ladder and car handles
|
The rear ladder is made of aluminum alloy, and the handle is made of grooved anti-slip round steel pipe with plastic spray
treatment on the surface. |
|
Tank material
|
Water tank Q235B high quality carbon steel/5mm, foam tank 304 stainless steel/4mm
|
|
manhole
|
One DN460 manhole with quick locking/opening device
|
|
Overflow
|
Provide 1 DN65 overflow port
|
|
Put the residual water outlet
|
Set up a DN40 water tank with a residual water outlet and a ball valve.
|
|
Water inlet
|
Connect one DN65 interface to the left and right sides of the water tank.
|
|
water inlet and outlet
|
Set up a water tank to the water pump inlet pipe, DN100 valve, manual control, set up a water pump to the water tank filling pipe,
DN50 valve, manual control |
|
PTO
|
Sandwich type full-function power take-off
|
|
Fire Pump
|
CB10/60 low-pressure vehicle fire pump
|
|
Fire pump form
|
Normal pressure centrifugal
|
|
Limited Data
|
|
|
Outlet rated pressure
|
1.0MPa
|
|
maximum suction depth
|
7m
|
|
water diversion device
|
Comes with sliding vane pump
|
|
Water diversion time
|
Maximum suction depth ≤50s
|
|
Vehicle-mounted water cannon model
|
PL48 fire monitor (West)
|
|
Rotation angle
|
360° horizontal rotation
|
|
Maximum elevation/depression angle
|
Depression angle ≤ -15°, elevation angle ≥ +45°
|
|
flow
|
40L/S
|
|
range
|
Water≥65m
|
|
Vehicle foam model
|
PL8/32
|
|
Rotation angle
|
360° horizontal rotation
|
|
Maximum elevation/depression angle
|
Depression angle ≤ -15°, elevation angle ≥ +45°
|
|
flow
|
32L/S
|
|
range
|
Foam≥55m Water≥65m
|
|
Fire control system
|
|
|
In-cab controls
|
Water pump disengagement, lighting and signaling device control, etc.
|
|
Pump indoor control
|
Bodywork main power switch, parameter display, status display
|
|
Auxiliary lighting
|
The fireman's room, water pump room and equipment box are equipped with lights respectively, and the control panel is equipped with lighting, indicator lights, etc.
|
|
warning device
|
A long row of red warning lights is installed on the top of the cab, and red strobe lights are installed on both sides of the
vehicle body. |
|
Fire scene lighting
|
Install a 35W fire searchlight on the rear of the bodysuit
|
Q1. What's your MOQ?
One unit trailer or truck.
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
