Alat berat Busa 35Poliuretana Tambang Cnamc-600

• Type: Polyurethane Foam Machine
• Raw Material: Poly
• Principle: Blast in the Low-Pressure Type
• Automation: Non-Automatic
• Computerized: Non-Computerized
• Certification: CE, QS
• Tidak. Model.: CNMC-600
• contoh: cnmc600
• sumber daya: 3-fase 4-kabel 380v 50hz
• proses pemanasan: 1,500 w
• mode yang digerakkan: pneumatik
• sumber udara: 0.5 mpa 0.8 mpa, 3 m/mnt
• kecepatan rotasi: 500/mnt
• Paket Transportasi: Wooden Case or as Customer′s Request
• Spesifikasi: 750x500x800 mm
• Merek Dagang: CNMC
• Asal: Shandong, China
• Kapasitas Produksi: 999 Sets/Month

Deskripsi Produk

Product Description of  polyurethane spray foam insulation machine 

China Hightop CNMC-600 low pressure polyurethane pu foam making machine

The machine has two possession tanks, each for independent tank of 28kg. Two different liquid materials are entered into the two ring shaped piston metering pump from two tanks respectively. Start the motor and the gearbox drives two metering pumps to work at the same time. Then two kinds of liquid materials are sent to the nozzle at the same time in accordance with the pre-adjusted ratio.

Advantage of polyurethane spray foam insulation machine

1. The cylinder solenoid valves are all imported, more expensive than the common cylinders.

2. Free on-line training for technology, full way tracking and testing, high sales volume.

3. All accessories are supplied by the original manufacturer and are available to customers at cost price

4. The high pressure pipe is anti-corrosion.

5. The temperature control meter is dual display, which can display the actual temperature and the set temperature. Other manufacturers can only display the set temperature and can not see the actual temperature. Red meter shows the actual temperature, green shows the set temperature
6. The operation temperature control panel is independent module which can be replaced separately. For other factories ,there is an integrated board next to the temperature control table,if one is broken ,others temerature meters all should be changed .

Learn to maintain machine :

Main Machine Daily Use and Maintenance:
1 Replace DOP in oil cup of primary-secondary pump daily;
2 When equipment stops running, swerve Start/Reset switch to reset direction, making sure cylinder rod fully soaked inside DOP liquid, in this way it can prolong service life of seal ring.
3 Check sensitivity of the equipment heating system, if anything goes wrong, please fix the problem as soon as possible.
4 When equipment isn't working, please turn off heating system timely, for not only it prevents potential danger also avoids low foaming quality cuz polyol material long-time heating.
5 Make sure turning on and off heating system in correct order. When turning on, first start main power,then turn on heating system; when turning off, first stopping heating system then turning off main power.
6 Remember to check if there's enough oil inside oil-water separator and the water expelled from the separator;

Parameter of polyurethane spray foam insulation machine

Model	CNMC600
Power source	3-phase 4-wires 380V 50Hz
Heating powe	1.5KW
Driven mode	Pneumatic
Air source	0.5~0.8 MPa ≥0.6m 3 /min
Max Raw output	9 kg/min
Spray gun	1 Set
Heating hose	8 meters
Metering pump model	HJ9-100
Entrance diameter	1/2inch
Exit diameter	1/2inch
Rotation speed	500/min
Machine dimension	750x500x800 mm
Machine weight	150KG

Images of polyurethane spray foam insulation machine

About Us

Welcome to our company, here the high qulality products and professional services will be your best choice !