Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit MDR-10,20,40,60,100 series is a 10,20,40,60,100W single output closed power supply, with a 30mm low profile design, using 85-264VAC full range AC input series to provide 5V,12V,15V,24V,36V and 48V output.
ln addition to efficiency as high as 91.5%,the metal mesh enclosure is designed to enhance the heat dissipation capability so that the MDR-10,20,40,60,100 operates in the temperature range from -30ºC to +70ºC without fans. It provides ultra-low no-load power consumption (less than 0.3W), which makes the terminal system easy to meet the intern-ational energy requirements. MDR-10,20,40,60,100 has complete protection function and anti-5G vibration capability;It conforms to EN 60950-1,EN 60335-1,EN 61558-1/-2-16 GB4943 international saety regulations; MDR-10,20,40,60,100 series provides a cost-effective solution for various industrial applications.
| MDR-10,20 Rail type switch power supply | ||||||||||
| Type | Technical indicators | |||||||||
| Output | DC voltage | 5V | 12V | 15V | 24V | |||||
| Ripple and noise | <80mV | <120mV | <120mV | <150mV | ||||||
| Voltage regulation range | ±10% | |||||||||
| Linear adjustment rate | ±1% | |||||||||
| Load rregulation rate | ±5% | ±3% | ±3% | ±2% | ||||||
| Input | Star up time | 1000ms,30ms,25ms:110VAC 500ms,30ms,120ms:220VAC | ||||||||
| Voltage range/frequency | 85-264VAC/120VDC-370VDC 47Hz-63Hz | |||||||||
| Efficiency(typcial) | >77% | >81% | >81% | >84% | ||||||
| Shock current | 110VAC 35A.220VAC 70A | |||||||||
| Protection characteristics | Short circuit protection | 105%-150% Type:protection mode: burp mode automatic recovery after the abnormal condition is lifted | ||||||||
| Over voltage protection | Output voltage is 135%>, close the output.When the abnormal condition is lifted,it will resume automatically | |||||||||
| Environmental science | Working temperature and humidity | -20ºC~+70ºC;20%~90RH | ||||||||
| Storage temperature and humidity | -40ºC~+85ºC; 10%~95RH | |||||||||
| Security | Pressure resistance | Input-output :3KVAC | ||||||||
| Isolation resistance | Input-output and input-shell, output-shell:500VDC/100mΩ | |||||||||
| Other | Size | 22.5*90*100mm(L*W*H) | ||||||||
| Net weight/gross weight | 170/185g | |||||||||
| Remarks | (1) Measurement of ripple and noise: Using a 12"twisted-pair line with a capacitor of 0.1uF and 47uF in parallel at the terminal,the measurement is carried out at 20MHz bandwidth. (2)Efficiency is tested at the input voltage of 230VAC, rated load and 25ºC ambient temperature.Accuracy:including setting error,linear adjustment rate and load adjustmient rate.Test method of linear adjustment rate: testing from low voltage to high voltage at rated loadLoad adjustment rate test method: from 0%-100% rated load.The start-up time is measured in the cold start state, and the fast frequent switch machine may increase the startup time.When the altitude is above 2000 meters, the operating temperature should be lowered by 5 /1000. |
|||||||||
| Type | MDR-10 | |||
| DC voltage | 5V | 12V | 15V | 24V |
| Rated current | 2A | 0.84A | 0.67A | 0.42A |
| Rated power | 10W | 10W | 10W | 10W |
| Voltage precision | ±5% | ±3% | ±3% | ±2% |
| Working current | 0.33A/110VAC 0.21A/230VAC | |||
| Type | MDR-20 | |||
| DC voltage | 5V | 12V | 15V | 24V |
| Rated current | 3A | 1.67A | 1.34A | 1A |
| Rated power | 15W | 20W | 20W | 24W |
| Voltage precision | ±2% | ±1% | ±1% | ±1% |
| Working current | 0.33A/110VAC 0.21A/230VAC | |||
| MDR-40,60 Rail type switch power supply | ||||||||||
| Type | Technical indicators | |||||||||
| Output | DC voltage | 5V | 12V | 24V | 48V | |||||
| Ripple and noise | <80mV | <120mV | <150mV | <200mV | ||||||
| Voltage regulation range | ±10% | |||||||||
| Linear adjustment rate | ±1% | |||||||||
| Load rregulation rate | ±1% | ±1% | ±1% | ±1% | ||||||
| Input | Star up time | 500ms,30ms,25ms:110VAC 500ms,30ms,120ms:220VAC | ||||||||
| Voltage range/frequency | 85-264VAC/120VDC-370VDC 47Hz-63Hz | |||||||||
| Efficiency(typcial) | >78% | >86% | >88% | >88% | ||||||
| Shock current | 110VAC 35A.220VAC 70A | |||||||||
| Protection characteristics | Short circuit protection | 105%-150% Type:protection mode: burp mode automatic recovery after the abnormal condition is lifted | ||||||||
| Over voltage protection | Output voltage is 135%>, close the output.When the abnormal condition is lifted,it will resume automatically | |||||||||
| Environmental science | Working temperature and humidity | -20ºC~+70ºC;20%~90RH | ||||||||
| Storage temperature and humidity | -40ºC~+85ºC; 10%~95RH | |||||||||
| Security | Pressure resistance | Input-output :3KVAC lasted for 1 minute | ||||||||
| Isolation resistance | Input-output and input-shell, output-shell:500VDC /100mΩ | |||||||||
| Other | Size | 40*90*100mm(L*W*H) | ||||||||
| Net weight/gross weight | 300/325g | |||||||||
| Remarks | (1)Measurement of ripple and noise: Using a 12"twisted-pair line with a capacitor of 0.1uF and 47uF in parallel at the terminal,the measurement is carried out at 20MHz bandwidth. (2)Efficiency is tested at the input voltage of 230VAC, rated load and 25ºC ambient temperature.Accuracy:including setting error,linear adjustment rate and load adjustmient rate.Test method of linear adjustment rate: testing from low voltage to high voltage at rated loadLoad adjustment rate test method: from 0%-100% rated load.The start-up time is measured in the cold start state, and the fast frequent switch machine may increase the startup time.When the altitude is above 2000 meters, the operating temperature should be lowered by 5/1000. |
|||||||||
| Type | MDR-40 | |||
| DC voltage | 5V | 12V | 24V | 48V |
| Rated current | 6A | 3.3A | 1.7A | 0.83A |
| Rated power | 30W | 40W | 40.8W | 39.8W |
| Voltage precision | ±2% | ±1% | ±1% | ±1% |
| Working current | 1.1A/110VAC 0.7A/220VAC | |||
| Type | MDR-60 | |||
| DC voltage | 5V | 12V | 24V | 48V |
| Rated current | 10A | 5A | 2.5A | 1.25A |
| Rated power | 50W | 60W | 60W | 60W |
| Voltage precision | ±2% | ±1% | ±1% | ±1% |
| Working current | 1.8A/110VAC 1A/230VAC | |||
| MDR-100 Rail type switch power supply | ||||
| Type | Technical indicators | |||
| Output | DC voltage | 12V | 24V | 48V |
| Rated current | 7.5A | 4A | 2A | |
| Rated power | 90W | 96W | 96W | |
| Ripple noise | <120mV | <150mV | <200mV | |
| Voltage accuracy | ±1% | ±1% | ±1% | |
| Output voltage adjustment range | ±10% | |||
| Load regulation | ±1% | ±1% | ±1% | |
| Linear regulation | ±1% | |||
| Input | Voltage range | 85-264VAC 47Hz-63Hz(120VDC-370VDC) | ||
| Power factor | PF≥0.95/230VAC PF≥0.98/115VAC(full load) | |||
| Efficiency is not | >83% | >86% | >87% | |
| Working current | <1.3A 110VAC <0.8A 220VAC | |||
| lmpact of current | 110VAC 35A 220VAC 70A | |||
| Start, rise, hold time | 3000ms,50ms,20ms:110VAC 3000ms,50ms,50msms:220VAC | |||
| Protection characteristics | Overload protection | 105%-150%Type:protection mode:burp mode automatic recovery after the abnormal condition is lifted | ||
| Over voltage protection | Output voltage is 135%>, close the output. When the abnormal condition is lifted, it will resume automatically | |||
| Over temperature protection | >85°when close the output temperature drop after power supply recovery after restart | |||
| Environmental science | Working temperature and humidity | -20ºC-+70ºC;20%-90RH | ||
| Storage temperature, humidity | -40ºC-+85ºC;10%-95RH | |||
| Security | Pressure resistance | Input-output:3kvac lasted for 1 minute | ||
| lsolation resistance | Input-output and input-shell, output-shell:500 VDC/100mΩ | |||
| Other | Size | 55*90*100mm | ||
| Net weight/gross weight | 420/450g | |||
| Remarks | (1)Measurement of ripple and noise:Using a 12"twisted-pair line with a capacitor of 0.1uF and 47uF in parallel at the terminal,the measurement is carried out at 20MHz bandwidth. (2)Efficiency is tested at the input voltage of 230VAC, rated load and 25ºC ambient temperature.Accuracy:including setting error,linear adjustment rate and load adjustmient rate.Test method of linear adjustment rate: testing from low voltage to high voltage at rated load adjustment rate test method: from 0%-100% rated load.The start-up time is measured in the cold start state, and the fast frequent switch machine may increase the startup time.When the altitude is above 2000 meters, the operating temperature should be lowered by 5/1000. |
|||
CEJIA has over 20 years of experience in this industry and has built a reputation for providing quality products and services at competitive prices. We are proud to be one of the most reliable electrical equipment suppliers in China with more. We attach great importance to product quality control from raw materials procurement to finished product packaging. We provide our customers with solutions that meet their needs on a local level, while also giving them access to the latest technology and services available.
We are able to produce large volumes of electrical parts and equipment at very competitive prices in our state-of-the-art manufacturing facility located in China.
Q1:Are you a trading company or manufacturer?
A.We are professional manufacturer for low-voltage circuit breaker series products,Integrates research and development, manufacturing, processing and trade departments together. also we supply of different electrical and electronic items
Q2: why will you choice us :
A.more than 20years of professional teams will give you good quality products ,good service ,and reasonable price
Q3: Is the MOQ fixed?
A.The MOQ is flexible and we accept small order as trial order.
....
Dear Customers,
If you have any question , please feel free to contact with me , I will send you our catalog for your reference.
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
