"Great" Tkd-30NF/Hf Air Cooling Refrigerated Compressed Air Dryer

• After-sales Service: Technical Support on Site
• Warranty: 12~24month
• Flow: Cross Flow
• Material Status: Powder
• Drying Medium: Air
• Structure: Enclosed
• Tidak. Model.: TKD-30NF/HF
• Operation Pressure: 0.6~1.0MPa
• Inlet Temperature: Normal/High Temperature
• Cooling Way: Air Cooling
• Type: Pressure Spray
• laju aliran udara tetapan (nm³/mnt): 34 nm³/mnt
• P.D.P: tekanan pada titik 2-10 celcius
• refrigerant: r22 atau r407c
• berat (kg): 800
• noise (kebisingan): senyap/senyap
• warna: biru/abu-abu/hitam/putih/merah/disesuaikan
• sertifikasi: ce & iso9001
• produk: pengering udara kompresi/pengering beku
• temperatur udara masuk: jenis tkdklik≤45≤/tekddhf tipe 80
• tegangan listrik: 3pj 380v 50hz
• Paket Transportasi: Standard Export Wooden Packing
• Spesifikasi: 1600× 750× 1400mm
• Merek Dagang: GREAT
• Asal: Tianjin, China
• Kode HS: 8414809090
• Kapasitas Produksi: 200 Pieces/Month

Deskripsi Produk

The GREAT  Refrigerated Compressed Air Dryer there are different models to choose from: the rated air flow rate from 1.5Nm³/min to 65Nm³/min, the working pressure from 0.6Mpa to 1.0Mpa. We can also customize according to your needs. This device is used to remove moisture from compressed air.

A. The Picture for Refrigerated Compressed Air Dryer:
B. Products Introductions & Advantages for Refrigerated Air Dryer:
1.  Compressed air get through the dryer and be cooled by forced, make the water vapor in the air condenses into liquid water and discharge out from the machine taking away the dust and oil impurities at the same time optimized pollutant discharge system. 
2.  The refrigerants are air wind fan cooling or water-cooling types for option.  Wind fan type machine adopt outer rotor wind fan, big windy and low noisy, can use long time.  Water cooler adopt low wing copper tube, slowly water flow and many strokes, high heat exchanging rate, low scaling. 
3.  Adopt filtration type of air and liquid separator, equipped with American HANKISON brand filter elements, much higher separating efficiency than cyclone type separator, separating efficiency can be up to 99.66%. 
4.  Adopt stainless steel tube and galvanized tube, good acid and alkali corrosion resistance, suitable for food, beverage, medicine fields. 
5.  Adopt world famous Armstrong brand of foam anti-flaming insulation materials, no air loss, low energy consumption.  Working pressure is between 0.3-4.5Mpa, IP54. 
6.  Single, Integrated, joint control, PC board, frequency conversion or other control circuits type, can meet different user's demand. 
7. TKDNF series of air inlet temperature under 45ºC, TKDHF series of air inlet temperature under 80ºC.

C. The Technical Parameters of Air Cooling Refrigerated Air Dryer:

Model

TKD-1NF

TKD-2NF

TKD-3NF

TKD-6NF

TKD-7.5NF

TKD-10NF

TKD-12NF

TKD-15NF

TKD-20NF

TKD-30NF

TKD-40NF

TKD-50NF

TKD-60NF

TKD-1HF

TKD-2HF

TKD-3HF

TKD-6HF

TKD-7.5HF

TKD-10HF

TKD-12HF

TKD-15HF

TKD-20HF

TKD-30HF

TKD-40HF

TKD-50HF

TKD-60HF

Rated air flow rate (Nm³/min)

1.5

2.6

3.8

6.9

8.5

11

14.9

17

22

34

45

55

65

Working pressure (MPa)

0.6~1.0

Ambient temperature

≤38  (ºC)

Final air dryness(P.D.P)

Pressure Dewpoint 2~10 ºC ( moisture content  0.6-1.4g/Nm³)

Refrigerant

R134a

R22 or R407c

Power voltage

1ph 220V 50HZ

3ph 380V 50HZ

Refrigeration compressor power (HP)

0.35

0.45

0.65

1.57/1.1

1.65

1.94/2.57

2.57/2.94

2.94/3.75

3.75/4.4

5.2/5.88

7.35

8.82

9.92

Air fan motor power (W)

90

120

180

180

120*2

180*2

180*2

180*2

180*2

250*2

250*2

300*3

300*3

★180

★240

★300

★300

★480

★600

★600

★600

★180*4

★250*4

★250*5

★300*6

★300*6

Pipe diameter of air outlet/inlet

G3/4

G3/4

G1

G1-1/2

G1-1/2

G2

G2

DN65

DN65

DN80

DN100

DN100

DN125

length (mm)

TKDN(H)F

500

500

765

895

895

1005

1005

1250

1250

1600

1800

1800

2100

width (mm)

305

305

435

485

485

585

585

630

630

750

900

900

1010

height (mm)

670

670

765

875

875

1130

1130

1300

1300

1400

1620

1620

1710

Net weight(Kg)

25/27

39/36

40/38

82/75

82/83

190/220

220/260

280/350

320/580

650/800

750/900

850/1000

1100/1350

Note : NF stands for normal temperature(air inlet temperature under 45ºC)wind cooling type. HF stands for high temperature(air inlet temperature under 80ºC)wind cooling type. ★ stands for high temperature wind fan power, the pressure loss of the dryer lower than 3%.

D. Applications:    

E. Certification:    

F. Packing:    

G. Company Profile:
H. Our Service:
1. After-sale Service
    1). Any questions or requests before, during or after sales, we would like to help you any time and will find you the best solution in 24 hours.
    2). Warranty: One year for the whole machine two year for air end , and spare parts will be provided with best price.
    3). Over board engineer service is available.

2. Special Customized Service
    1) Full OEM
      • Quantity: at least 5 pcs
      • In this plan, we will do all the changes (Color, name plate and logo) as your need, and will not charge extra fee.
    2) Half OEM
      • Quantity: no limit
      • Under this program, we can make the necessary alteration (name plate and logo) but we will charge some extra fee for the name plate, as the name plate factory has the MOQ.
    3) Logo OEM
      • Quantity: no limit
      • Only the logo will be changed to yours, and no extra fee will be charged.

3. Overseas Engineer Service
    We are available to send our engineer for aboard service. Only need you to arrange the accommodation, transportation and translator. Extra cost for each will be discussed based on local price level.

I. FAQ:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company. 

Q2: What the exactly address of your factory?
A2: Our company is located in the West of the cross of Yijing road and Siwei road, Dongli Economic Development Area, Tianjin, 300300, China

Q3: How about the warranty terms of your machine?
A3: One year for the whole machine and two years for screw air end, and technical support according to your needs.
 
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
 
Q5: What about product package?
A5: We will pack the products strictly with standard wooden carton.
 
Q6: Can you customized the voltage of products?
A6: Yes, the voltage can be customized according to your requirement.

Q7: How long will you take to arrange production?
A7: 380V 50HZ we can delivery the goods within 7-15 days. Other electricity or other color we will delivery within 15-20 days.
 
Q8: Which payment term can you accept?
A8: T/T or L/C.
 
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

Q10: Can you use our brand?
A10: Yes, with professional design team, the OEM orders are highly welcome.