Busa Poliuretan Ekspansi Poliuretan PU S1070 S1090 Busa Isolasi Semprot

• CAS No: 9009-54-5
• Rumus: -nhcoo-
• EINECS: 210-898-8
• Warna: Hitam
• Tampilan: Cairan
• Bahan mentah Utama: Poliuretan
• Metode: Semprotan
• Rata: Lapisan akhir Coat
• Metode pengeringan: Pengering udara
• Sertifikasi: ISO14001, CCC, RoHS, ISO9001
• Komponen: Pembuatan film penting
• Mekanisme Pembentukan: Jenis Konversi
• kerapatan penyemprotan: >40kg/m3
• tingkat sel-tertutup: >90%
• konduktivitas termal awal(15): <24mw/(m.k)
• kekuatan represif: >150kpa
• Paket Transportasi: drum 200l
• Spesifikasi: a & b
• Merek Dagang: tinggi
• Asal: Shandong China
• Kode HS: 3907299090
• Kapasitas Produksi: 5000000/bulan

Deskripsi Produk

Mousse Polyurethane Spray Polyurethane  Pastel Color For Pu Foam Foam Spray Gun

 

pu polyurethane spray foam closed cell raw material for spray insulation DQT-501C is spray blend polyols, blowing agent is 365mfc/245fa instead of HCFC-141B, it reacts with iso-cyanate to produce foam which has excellent performances, which are as follows: 1) fine and uniformity cells 2) low thermal conductivity 3) good low temperature dimensional stability. It applies to all kinds of thermal insulation engineering which uses the spray technology, such as cold rooms, pots, large-scale pipelines and construction metope etc.

200L/drum, 4 drums per pallet, 80 drums for one 20ft container.

Foam Performances
items	Test Method	Index
Spray Density	GB 6343	>40kg/m3
Closed-cell Rate	GB 10799	≥90%
Initial Thermal Conductivity(15ºC)	GB 3399	≤24mW/(m.K)
Compressive Strength	GB/T8813	≥150kPa
Adhesive Strength	GB/T16777	≥120kPa
Elongation at break	GB/T9641	≥10%
Dimentional Stability 24h -20ºC	GB/T8811	≤1%
24h 70ºC		≤1.5%
Water Absorption	GB 8810	≤3%
Oxygen Index	GB 8624	≥26

Advantage of polyurethane spray foam insulation machine PU Foam Polyurethane insulation raw material 1. The cylinder solenoid valves are all imported, more expensive than the common cylinders. 2. Free on-line training for technology, full way tracking and testing, high sales volume. 3. All accessories are supplied by the original manufacturer and are available to customers at cost price 4. The high pressure pipe is anti-corrosion. 5. The temperature control meter is dual display, which can display the actual temperature and the set temperature. Other manufacturers can only display the set temperature and can not see the actual temperature. Red meter shows the actual temperature, green shows the set temperature 6. The operation temperature control panel is independent module which can be replaced separately. For other factories ,there is an integrated board next to the temperature control table,if one is broken ,others temerature meters all should be changed . Learn to maintain machine : Main Machine Daily Use and Maintenance: 1 Replace DOP in oil cup of primary-secondary pump daily; 2 When equipment stops running, swerve Start/Reset switch to reset direction, making sure cylinder rod fully soaked inside DOP liquid, in this way it can prolong service life of seal ring. 3 Check sensitivity of the equipment heating system, if anything goes wrong, please fix the problem as soon as possible. 4 When equipment isn't working, please turn off heating system timely, for not only it prevents potential danger also avoids low foaming quality cuz polyol material long-time heating. 5 Make sure turning on and off heating system in correct order. When turning on, first start main power,then turn on heating system; when turning off, first stopping heating system then turning off main power.