Anti Aging Long Filament Composite Geomembrane Film for Slope Protection and Anti-Seepage Composite Geomembrane Film, Polyester Long Filament Two Cloth One Film

• Layanan purna jual: hingga kepuasan 100%
• Garansi: tiga tahun
• Warna: putih
• Aplikasi: Rekayasa Kelistrikan, Proyek Jalan & Kereta & Bandara, Proyek PengConservancy Air, rekayasa geotag dan lingkungan
• Fungsi: Penguatan, Drainase, mencegah lihat halaman
• Klasifikasi: Dengan Geometric Ebrenge yang sebelumnya komposisi
• Tidak. Model.: 200g-3000g
• Material: hdpe
• Tipe: Geometric Komposit
• permukaan: halus
• lebar: 1-8 meter
• panjang: dapat dikustomisasi
• karakteristik: isolasi, drainase, penguatan
• tipe: dua lapisan geotag dan satu lapisan geotag
• Paket Transportasi: Export Special Packaging
• Spesifikasi: customizable
• Merek Dagang: Sentai
• Asal: Dezhou City, Shandong Province
• Kode HS: 5603149000
• Kapasitas Produksi: 400000/Year

Deskripsi Produk

 

Product Description

Composite geomembrane is an impermeable material composed of geotextiles and geomembranes. It is mainly used for anti-seepage. Composite geomembranes are divided into one fabric one membrane and two fabrics one membrane, with a width of 4-6 meters and a weight of 200-1500g/m2. They have high physical and mechanical performance indicators such as tensile strength, tear resistance, and top breaking, and can meet the needs of civil engineering such as water conservancy, municipal engineering, construction, transportation, subway, and tunnel. Due to the use of polymer materials and the addition of anti-aging agents in the production process, it can be used in unconventional temperature environments.

Composite geomembrane is widely used in canal anti-seepage engineering. In recent years, the extensive application and effectiveness of geosynthetics in civil engineering, especially in flood control and emergency engineering, have attracted high attention from engineering and technical personnel. For the application technology of geosynthetic materials, the country has put forward normative technical requirements from aspects such as anti-seepage, filtration, drainage, reinforcement, and protection, greatly accelerating the promotion and application of new materials. This material has been widely used in the anti-seepage engineering of irrigation channels. Combining with construction practice, this article discusses the application technology of composite geomembrane.

 

Product Parameters

Unit weight g/m2	400	500	600	700	800	900	1000	Remarks
Project
Thickness of Membrane(mm)	0.25-0.35				0.3~0.5
Breaking Strength KN/m	5	7.5	10.0	12.0	14.0	16.0	18.0	MD and CD
Elongation at Break %	30~100
CBR Mullen Burst Strength KN≥	1.1	1.5	1.9	2.2	2.5	2.8	3.0	MD and CD
Tear Strength KN≥	0.15	0.25	0.32	0.4	0.48	0.56	0.62
Peel Strength N/cm	6
Vertical Permeability Coefficient cm/s	K×10^-11~-13							K=1.0-0.9

Construction precautions
 

1. Foundation treatment: Clean the surface of the geotextile membrane, ensuring that the substrate is flat, the soil is solid, and there are no unevenness, cracks, sharp objects, stones, iron wires, wooden sticks, etc. Within the anti-seepage range, the grass and tree roots should be removed, and weed control agents should be sprayed.



On the contact surface with the membrane, a layer of sand or clay with small particle size should be laid as a protective layer, and the thickness of the protective layer should not be less than 30 cm.

 

Laying method:

1. Lay in a certain direction, but do not pull too tightly. Leave a certain amount of expansion and contraction to adapt to the deformation of the substrate.

2. A PE film with a certain width reserved on both sides of the geotextile and a non adhesive layer of PET fabric (i.e. edge throwing) should be laid. When laying, the direction of each unit of geotextile should be adjusted to facilitate the welding of the two unit geotextiles

3. After laying the geomembrane, it should be pressed with a sandbag to prevent wind and sand from affecting the welding of the edge of the geomembrane in the next step

4. Geomembrane welding. Joint treatment is a key construction procedure, usually using hot welding method. The surface of the PE film is heated to melt, and then fused into a whole through pressure

5. For the laid geomembrane, the edge joints must be free of oil, water, dust, etc

6. Before welding, adjust the two sides of the PE single film at the joint to overlap a certain width, which is generally 6-8 cm and flat without wrinkles

7. Use a dedicated welding machine for welding

 

 

Application field of composite geomembrane
 

 

Company Profile

Texas Sentai Environmental Protection Technology Co., Ltd. covers an area of 50 acres, with nearly 100 employees and more than 50 professional and technical personnel. We are an environmental protection technology oriented enterprise mainly engaged in the production of a series of new geosynthetic materials, specializing in the design and research and development of geosynthetic materials application, specialized production and manufacturing, construction design services, and system solution services for infrastructure construction projects such as transportation, water conservancy, environmental protection, ecological restoration, environmental governance, municipal construction, and animal husbandry. Our main products include various types of geosynthetic fabrics, geosynthetic membranes, and composite geosynthetic membranes

Our Advantages