550m Head Boiler Feed Water Pump/ Single Stage Single Suction Pump / Ring Section Centrifugal Pump Dg120-50X11

• Layanan purna jual: lainnya
• Garansi: 1 tahun
• Maks. Head: 6 m
• Kapasitas Maks.: 140m3/j
• Jenis berkendara: Motor
• Nomor IMPELLER: Pompa Multitahap
• Tidak. Model.: DG120-50x11
• Tekanan Kerja: Pompa Tekanan Rendah
• Tipe Impeller: Pompa isap Tunggal
• Posisi Poros Pompa: Pompa Horizontal
• Selubung pompa dikombinasikan: Pompa Belahan Horizontal
• Tinggi Pemasangan: Sentrifugal
• Impeller: Tertutup
• Penggunaan: Pompa, Pompa, air bersih, tambang, pabrik dan pekerjaan di tingkat kotapraja
• kualifikasi 1: sertifikasi keselamatan tambang batubara
• kualifikasi 2: sertifikasi sistem kualitas internalsional
• kualifikasi 3: :2015
• kualifikasi 4: produk patent model utilitas
• Paket Transportasi: Shipping Wooden Case
• Spesifikasi: customized
• Merek Dagang: Canpump
• Asal: Changsha, Hunan, China
• Kode HS: 8413709990
• Kapasitas Produksi: 20000 Pieces/Year

Deskripsi Produk

Performance range:

Flow range: Q= 3.75 ~ 336m3/h

 Lift range(head): H= 81-1100m

 Rotating Speed: 2950 / 1480r / min

Motor power: 18.5 ~ 1250KW

Water temperature: - 20 ° ~ 160 °



Scope of application:

       This series of products are used for water supply of medium, low pressure and sub high pressure steel furnaces in thermal power plants, enterprise owned power plants and cogeneration projects. They are also used for water supply and drainage of factories or cities transporting sub high pressure and high temperature clean water. The temperature of conveying medium is - 20 ºC ~ 160 ºC, and the allowable inlet pressure is less than 0.6MPa.
This series of pumps adopt the water conservancy model of high-efficiency and energy-saving products recommended by the state. The utility model has the advantages of high efficiency, wide performance range, safe and stable operation, low noise, long service life, convenient installation and maintenance, etc.



Model's meaning:

Such as DG85 - 45x6 

DG----DG Series horizontal multi-stage boiler feed pump

85-----design point flow is 85 m³/h

45----design point single-stage lift: 45m

6 ------pump stages: 6



  Our DG series Horizontal Multistage Ring Section Centrifugal Boiler Feed Water Pump is is a radially split, segmented casing, multistage pump designed with modular interstage components. These identical components can be assembled to produce pumps of varying numbers of stages, hydraulics, materials, and configurations to meet the customer's specific requirements.
 
Applications
* Hot water circulation
* Boiler water feeding on boat
* Power Plant cooling
* Heating factory boosting
* Cooling tower water supply
* Air-coniditioning
 
Features
Suction and discharge casings
* provide flexibility for customer piping layout.
* radial and end suction configurations are available for the suction casing.
* discharge casing is dual volute type.
* radial suction casing and discharge casing can have nozzles positioned in 90O increments to allow customer flexibility in plant layout and equipment location.
 
Parameters

Flow Capacity	96-140 m3/h	Delivery Head	84-660 m
Inlet/Outlet Dia.	200mm/200 mm	Working Pressure	≤ 6.345 MPa
Liquid Temperature	0 - 120 ºC	Driven By	Electric Motor / Diesel Engine
Seal Type	Mechanical seal / Gland packing	Liquid	Hot water or similar
Material of Construction	Cast Iron / Cast Steel / S.S304 / S.S316

Enterprise introduction:



Use pump house:
 

Application scenario of multistage pump:

common problem:





 Note:
The material is determined according to the temperature and corrosive of the transmission medium.

If there are special circumstances beyond the performance parameter table, the consultation on pump selection can be provided.

Our company can select materials according to the specific requirements of users, or produce according to the materials required by users.