5 mikron membuat Filter sedimen yang sangat Dwisal Kartrid untuk minum Air

• Material: PP
• Aplikasi: Industri, Makanan dan minuman, Obat-obatan, Microelectronics
• Tipe: Pre-Filtration
• Konektor Filter: DOE/222/226
• Peringkat Filtrasi: PRA-Filter
• Tipe Filter Karbon yang diaktifkan: Na
• Tidak. Model.: DLPP-MG
• peringkat penghapusan: 1/3/5/10/25μm
• od: 63 atau 115mm atau permintaan pelanggan
• panjang: 9.75", 9.87", 10", 20", 30", 40"
• pola aliran: dari luar ke dalam
• garansi komponen inti: 1 tahun
• nama merek: blueboo
• material seal: silikon/epdm/nbr/viton
• Paket Transportasi: POF/ Shrink Wrapped/Polybag
• Spesifikasi: 9.75"; 9.87"; 10"; 20"; 30"; 40"
• Merek Dagang: Darlly
• Asal: Zhejiang, China
• Kode HS: 59119000
• Kapasitas Produksi: 520000PCS/Month

Deskripsi Produk

Darlly Melt Blown Polypropylene Filter Cartridge




Three Layers PP Melt Blown Sediment Pre-filter
DLPP series Melt Blown Filter Cartridge is the standard one of Darlly melt blown filter cartridge series. It is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong particulate holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.

Features
- Three layers structure cartridge offers high dirt holding capacity,longerservice life
- Formed by thermal bond without using any binders and adhesives.
- 100% Pure Polypropylene will not cause any pollution to water
- Wide Chemical compatibility
- Groove design to extend the filtration surface area.
- All kinds of adaptors are available.
- FDA compliance material

Specifications

Outside Diameter	63mm, 115mm or up to customers' request
Inside Diameter	28mm,30mm
Length	9.75",9.87",10, 20, 30, 40, 50, 60
Filter media	PP
End caps	PP
Cores	PP
Gaskets/O-ring	Silicone, EPDM, NBR, Viton
End Cap Type	DOE/222 FLAT/222 FIN/ 226 FLAT/ 226 FIN
Removal Rating	1/3/5/10/25/50/75/100/150 μm
Max. Operating Temperature	65ºC
Max. Operating DP	2.0 Bar@21ºC