Solusi Nirkabel Sistem Alarm masyarakat

Community Burglar Alarm System
            Wireless Solution

1. Overview For Community Burglar Alarm System


All the alarm information(burglar,fire,help and ect) of the
householders in the community will be reported to the
property management center within seconds.and the alarm
system is wireless,use FSK+FHSS 433MHz signal
transmission technology,reducing construction costs,
maintenance costs and construction period.

2. community burglar alarm system

Wireless Solutio
FM transceiver
engineering host
electronic map
(Client-side)
( Property Management Center )
RS-485

(2)Use Signal Reapter to enlarge the wireless distance.
HB-ZFQ HB-ZFQ HB-ZFQ
The Wireless signal can be transmitted at most 8KM(Dual Communication)
Forwarded to the end
receiver
receive the signal
Wireless
repeat2 km
Wireless
repeat2 km Wireless
repeat2 km
Diagram:
Features:
1, No Cables!
2, Use FSK+FHSS 433MHz transmission technology,No signal inteference,no false alarm.
3, The signal can be transmitted about 8KM
(3)Diagram Of Alarm Center
FM Transceiver Engineering Host
Alarm information will be showed on the electronic map
Dual Communication(receive alarm signal
and remote control)
RS-485
Upper Alarm
Center
RS-232
Linkage CCTV


Features:
1.The map will immediately appearance on the screen when the detectors be triggered.and the alarming
detector will blink and remarks(zone number,alarm infomation and ect.)
2 .all the operations(arm,disarm and ect) can be operated by the alarm center.
3 .Work with Network Module(HB-WT),realizing control the host by internet.
4 .Work with Linkage Module(HB-LD),realizing alarm information be showed by electronic sand table and
linking camera.

3.Product Introduction

(1)Householder
Features:
a. 100 Wireless Zones.
b. Support Ademco contact ID protocol (HB-3030C ) .
c. 2 GroupsTiming Arm and Disarm.
d. 3 types alarm voice and the volume can be adjusted.
e. Use FSK+FHSS 433MHz wireless technology to transmit the alarm informaition to the alarm
center
Alarm Host Series
HB-3030A/C
Horizontal Alarm Host

Solar Wirless Infrared Barrier
1.It is much safer, for it alarms once the thief tries to come into the house.
2. Installed outdoor, not impeding indoor activities, and on duty round the clock.
3.use FSK + FHSS 433MHz transmission technology , no need cables,no signal inteference,no false alarm.
4.use Solar Powered,no need cables,no need change the batteries more than 8 years.
5.IPX66 waterproof .
6.Equipped with the function of self-check and reporting to the host
HB-T001S4
4 beams
HB-T001S8

Solar PIR Series(indoor) HB-T601
Solar&Wireless
Smoke Detector
HB-T201
Solar&Wireless
Curtain PIR Detector
HB-T205
Solar&Wireless PIR
detector

Features:
1.use Solar Powered(home light),no need cables,no need change the batteries more than 8 years.
2.use FSK + FHSS 433MHz transmission technology,no need external signal cables.
3 anti- electromagnetic , light , small pets interference, low false alarm rate .
4.automatic temperature compensation, working temperature environment is -40 ºC to 45 ºC

Wireless Magnetic
Door Contact
Features:
1.use FSK + FHSS 433MHz transmission technology,no need cables,no signal inteference,no false alarm.
2.big capacity battery,no need chage the battery more than 5 years(trigger times per day≤20)
HB-MC-1

Wireless Panic Button
HB-A380

Features:
1.use FSK + FHSS 433MHz transmission technology,no need cables,no signal inteference,no
false alarm.
2.big capacity battery,(trigger times more than 5000)


(2)Signal Repeater
Wireless signal Repeater
HB-ZFQ
Features:
1.it is used to enlarge the wireless distance between the detectors and receivers.
2.total 4 grades can be set.one signal reapter can enlarge 2KM wireless distance.
3.One signal repeater can be forwarded 50 pairs of solar wireless detector .

(3)Alarm Center
HB-G250
(Software Type)
Features:
1. 1000 wireless zones(defense zone No.000-999).Including 8 defense zone(defense zone No.000-
007)is for both wireless detectors and wired detectors.
2. Ademco contact ID protocol support.
3. differed from general 00K wireless singal,433 Mhz FSK +FHSS wireless signal transmission make it
immune to interference.
4. 6 defense zone type: Global zone, half-board zones, doorbell zone, shielding zones, bypassed zones,
emergency zones.
5. support arm/disarm/emergancy alarm by remote controller.
6. 6 digit length user number and setting code can be customized.
7. Work with our software,realizing all the alarm information be showed by electronic map.
8. Work with Network Module(HB-WT),realizing control the host by internet.
9. Work with Linkage Module(HB-LD),realizing alarm information be showed by electronic sand table
and linking camera.
Engineering Alarm Host

Features:
1. The software configured with hundreds of maps.the maps also can be added as you need.
2. Maps can be edited.The item and location of the detectors can be showed clearly.
3. The map will immediately appearance on the screen when the detectors be triggered.and the
alarming detector will blink and remarks(zone number,alarm infomation and ect.)
4. Dual communication between "map of 1st level machine" and "map of direct area".
5. Timing Arm/Disarm can be operated by the software.
6. Alarm records can be checked by the software.and all the records can be printed in Excel format.
7. Normally operations can be set by software


Wireless FM Transceiver
HB-SFQ

Features:
1.Wireless FM Transceiver can be connected to The Engineering Host by RS485 interface.it
not only can receive the signal,but also can transmit the signal.
2.Wireless FM Transceiver only can receive and transmit the signal from our own detectors.
3.Wireless FM Transceiver is usually installed on the top of the building,ensure it can receive
the signals smoothly.
4.Wireless transmission range :more than 3 KM in open air.

Linkage module
HB-LD

Features:
1.Configuring Engineering Host with LED linkage module.the location of the detector
will be showed on electronic table while the detector be triggered.
2.Configuring Engineering Host with Switch outputs Linkage module.The monitor
screen of the detector will be showed while the detector be triggered.

Network Module

HB-WT-1
Features:
1.The alarm center can remote control total 144 pieces Engineering Host through the
Internet.It is always used to built the large integrated system.
2.Provide SDK data to linking the NDVR.(1 Engineering Host+1 Network Module is a unit)


The features of the Community Burglar Alarm System are:
1.Use FSK+FHSS 433MHz Transmission technology,No cables,No signal
inteference,No false alarm.reduce the comprehensive cost,and make the system much
more intelligent.
2.Use the electronic map to show the alarm information,much more clear.
3.It is easy to built the alarm center and low cost.(1 computer and 1 Engineering Host)
4.it can realize much more functions if add other devices(Linkage Module,Network
Module and ect..)
Please contact us if any questions.Looking forward to cooperate with you!