Good Performance Electrostatic Enamel Powder Coating Spray Booth for Powder Coating line
Advantages:
* Easy installation
* Ground type which is easy for workpiece loading and off-loading
* Lower using cost
* Energy saving
* Long service lifetime
Specification of Powder Coating Booth:
| Structure |
Assembling structure, easy to transport
Ground type, staff could go inside for painting |
| External Size(mm) |
2580(W)*3355(D)*3040(H) |
| Internal Size(mm) |
2500(W)*2500(D)*2300(H) |
| Cabin System |
Made by galvanized steel, powder coated on the surface with high glossy powder coating. |
| Powder Recovery System |
Dust filter cartridges*6 sets, each size 600mm*Ø320mm
Solenoid valves*6 sets, the holeØ20mm, DC24V
Automatic pulse blowback to recovery the powder |
| Circulation System |
1 set of centrifugal blower, 7.5kW motor, air flow 6000~9000m³/h
The blower is connected with cabin by anti-flame flexible tube.
The exhaust vent of the blower could be adjusted in four directions |
| Blower Holder System |
Made by 80*80 square tubes
Independent from the booth to prevent the resonance and reduce the noise. |
| Power Supply |
380V/3phase/50Hz or customized |
| Lighting System |
6 sets of LED lights, high brightness and energy saving, 18W each, long lifetime and could reach the rated brightness within 1s. |
| Control System |
1 set, control the fan, lights and powder recovery system |
Machine Details:
1) Structure:
Assembling structure, easy to transport.
Ground type, staff could go inside for painting.
Made of galvanized steel and powder coated on the surface with high glossy powder coating.
2) Lighting System:
6 sets of LED lights, high brightness and energy saving, 18W each, long lifetime and could reach the rated brightness within 1s.
3) Powder Recovery System:
Dust filter cartridges*6 sets, each size 600mm*Ø320mm.
Solenoid valves*6 sets, the holeØ20mm, DC24V.
Automatic pulse blowback to recovery the powder.
4) Circulation System:
1 set of centrifugal blower, 7.5kW motor, air flow 6,000 ~ 9,000m³/h
The blower is connected with cabin by anti-flame flexible tube.
The exhaust vent of the blower could be adjusted in four directions
5) Blower Holder System:
Made by 80*80 square tubes
Independent from the booth to prevent the resonance and reduce the noise
Other Options:
Process of Powder Coating:
Step 1: Pre-treatment, to remove the rust and oil on the product's surface.
Step 2: Powder coating manually or automatically.
Step 3: Powder curing in the oven under 180ºC for 20 minutes.
Step 4: Cooling naturally
FAQ:
1. Is it safe to operate the machine?
Our equipment is safe, user-friendly and easy to operate, which provides secure setup and all mechanical units can be controlled well.
2. When I get this machine, but I don't know how to use it. What should I do?
There are videos and English manual together with the machine. Also, our technical team is 24 hours online for service support.
3. If some problems happen to this machine during warranty period, what should I do?
We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sales service. If you have any question,just contact us freely.
4. There are so many machine types, which one should I choose?
It is important to compare all data before choose the best prototype. Also, our sales team provides online services to resolve your confusion, please do feel free to contact us.
5. This is my first time to buy your machine; I have no ideas about the machines quality?
Each machine is strictly produced based on the industrial standard and CE certifications. Our products have CE certifications verified by TÜV SÜD, Bureau Veritas and etc. Customer is our first priority. We are confident in our high quality and reliable services.
6. How about the payment terms?
Wire transfer/Western Union/LC/Cash and so on.
Reliable Services:
1. All of machines are fully assembled and thoroughly tested and checked prior to shipment.
2. We provide pre-sales technical advisory services, technical maintenance training and operational training services.
3. We provide free repair for main spare parts within warranty period according to warranty agreement.
4. We provide upgrades and maintenance for software system within warranty period.
5. We provide technical maintenance and repair for third-party hardware and software products according to third-party manufacturer's warranty-grade.
6. We provide preferential lifetime maintenance of all equipment, spare parts are charged according to the prevailing market price beyond warranty period.
Pemasok yang Diaudit 
