Excavator Shansai 15ton S150 dengan Bucket 0.65 yang dilengkapi dengan Aksesori

• Layanan purna jual: 1 tahun
• Garansi: 1 tahun
• Tipe: Excavator crawler
• Penggunaan: Excavator Khusus, Excavator Laut, Excavator Pertambangan, Excavator GM
• Bucket: Shovel
• Transmission: Transmisi Hidraulik
• Tidak. Model.: SE150
• Tipe Drive: Drive Pembakaran Internal
• Kapasitas Bucket: 0.5 1.0m³
• Ukuran: Berukuran sedang
• Sertifikasi: CE, ISO9001: 2000
• Kondisi: Baru
• daya tetapan: 86/2200kw/rpm
• jarak bebas ke tanah minimum (mm): 425
• radius belok ekor (mm): 2380
• bobot kerja: 14500 kg
• tinggi penggalian maks..: 8670 mm
• ketinggian buang maks: 6210 mm
• kedalaman penggalian maks.: 5490 mm
• kapasitas bucket (m³): 0.65
• kecepatan ayun maksimum (r/mnt): 11.3
• gaya penggalian lengan bucket (kn): 70
• tekanan ke tanah (kpa): 43.8
• gaya penggalian bucket (kn): 97
• kapasitas tangki bahan bakar (l): 220
• lebar keseluruhan (mm): 2645
• panjang keseluruhan (mm): 7860
• Paket Transportasi: Nude Packing or by Container
• Merek Dagang: cruking
• Asal: Cina
• Kapasitas Produksi: 100sets/Month

Deskripsi Produk

Products Description

SHANTUI 15Ton SE150 Excavator with 0.65 bucket attached with accessories

 

* High-end system configuration
The high pressure common rail electronic injection engine features high power reserve and strong power.
The full set of Kawasaki negative-flow system features high stability and reliability and is the golden configuration among the products of same tonnage.
This machine features high system pressure, high flow, and fast motion response, with maximum digging force up to 105KN.
The comprehensively optimized working device and the cast shaft seats for boom and arm feature high strength, good wear resistance, and long life.
The two-sided support track rollers in place of carrier rollers, two one-sided track guides, and the reinforced X-frame are installed to adapt to severe working conditions.
The optional 0.65m3 rock bucket is designed specially for rock working condition.
* Enhanced working device
The structures of critical portions are comprehensively optimized and the load-carrying positions are reinforced to resist against severe working conditions.
The baseplates, side plates, and reinforcement plates of bucket are made of high-strength wear-resistant material to improvethe durability of bucket.
Based on the digging path of the bucket, the bucket structure is optimized to reduce the digging resistance and improve thedigging efficiency.
The H-shaped track frame features strong carrying capacity and reasonable machine load distribution. The track frame isequipped with standard boarding footplate to mitigate the user's labor strength and improve the user satisfaction.
* Intelligent electronic control
The intelligent control system realizes the optimal match between power system and hydraulic system to improve the working efficiency. The automatic idling function is provided to lower the fuel consumption and reduce the operating cost.
The man-machine friendly new generation intelligent electronic control system enables you to master all working status our machiney
Four preset working modes of P (Heavy-Load), E (Economic), A (Automatic), and B (Breaking Hammer) feature easy switchover.
* Optional attachments
Breaking hammer, ripper, timber grab, stone grab, quick change coupling, hydraulic tamper, quick change coupling, and breaking hammer pipeline.

Product Paramenters 

Comparative item	SE150 (Standard version)
Overall dimensions
Overall length (mm)	7860
Ground length (During transport) (mm)	4390
Overall height (To the top of boom) (mm)	2860
Overall width (mm)	2645
Overall height (To top of cab) (mm)	2855
Ground clearance of counterweight (mm)	915
Minimum ground clearance (mm)	425
Tail turning radius (mm)	2380
Track length (mm)	3645
Track gauge (mm)	2000
Track width (mm)	2500
Standard track shoe width (mm)	500
Turntable width (mm)	2645
Distance from slewing center to tail (mm)	2375
Working range
Maximum digging height (mm)	8670
Maximum dumping height (mm)	6210
Maximum digging depth (mm)	5490
Maximum vertical digging depth (mm)	4625
Maximum digging distance (mm)	8325
Maximum digging distance at ground level (mm)	8195
Working device minimum turning radius (mm)	2395
Maximum lifting height of bulldozer blade (mm)	-
Maximum digging depth of bulldozer blade (mm)	-
Engine
Model	QSF3.8T (China-III)
Type	4-cylinder, high pressure common rail, and water-cooled and turbocharged
Displacement (L)	3.76
Rated power (kW/rpm)	86/2200
Hydraulic system
Type of hydraulic pump	Variable displacement duplex plunger pump
Rated working flow (L/min)	2x130
Bucket
Bucket capacity (m³)	0.65
Swing system
Maximum swing speed (r/min)	11.3
Brake type	Mechanically applied and pressure released
Digging force
Bucket arm digging force (KN)	70
Bucket digging force (KN)	97
Operating weight and ground pressure
Operating weight (kg)	14500
Ground pressure (kPa)	43.8
Traveling system
Traveling motor	Axial variable displacement plunger motor
Traveling speed (km/h)	3.25/5.2
Traction force (KN)	118
Gradeability	70%(35°)
Tank capacity
Fuel tank capacity (L)	220
Cooling system (L)	20
Engine oil capacity (L)	12
Hydraulic oil tank/system capacity (L)	177/205

Contact

Esain Tan
Sales Manager
008617750658531

Details Images

Company Profile