Bj-Dpv DC Isolated Voltage Current Transducer, 4-20mA Output Electrical, for Industry Automatic Control

• Tipe: Elektromagnetik
• Tipe sinyal Output: Output Digital
• Proses produksi: Semikonduktor Terintegrasi
• Material: Logam
• Tingkat Akurasi: 0,5G
• Aplikasi: Mengalihkan Catu Daya
• Tidak. Model.: BJ-DPV
• Peringkat IP: IP65
• Sertifikasi: ISO
• Disesuaikan: Disesuaikan
• tingkat perlindungan: ip54
• jaringan: Modbus
• output: 0-20mA
• jenis antarmuka: Analog Input, Anglog Output, Digital Output
• Paket Transportasi: Carton
• Spesifikasi: 10*10cm
• Merek Dagang: Blue Jay
• Asal: Chongqing, China
• Kapasitas Produksi: 1000 Piece/Pieces Per Month

Deskripsi Produk

The Voltage sensor converts an AC / DC voltage or current input into a load-independent output signal. It has excellent temperature characteristics and good working stability. The output signal is based on the root mean square(RMS) measurement of the input signal and hence the transducer can be used with distorted waveforms. The unit conforms to IEC 60688. In addition, the voltage transducer rs485 meets the insulation requirements of IEC 60255-5, clauses 5, 6, and 8 as well as the high-frequency disturbance test of IEC 60255-22 for Class III test voltage.

 

Compared with the past transducers, the QPV AC voltage transducer, made of new technologies and materials, has been greatly improved in circuit, process, structure, etc., making its measurement accuracy higher and work more stable.

 

 

Feature

* 2/0.5 measurement accuracy

* Support customized parameters
* RMS measurement and output
* 500ms response time
* 35mm Din rail mounting
* High load capacity and reliability
* Low ripple output * A wide range of both D.C. current and voltage inputs are offered.


 

Specification

Signal Inputs
Input rating	QPA 0-1A, 0-5A, 0-10A
Overload	1.2 times rated continuous; 5sec @ 10 times of rated current 1sec @ 2 times of rated voltage
Burden	0.5VA
Measurement Output
Standard outputs	4~20mA or 0~5V
(others on request)	0~20mA;
		5~10V;
		0~10V;
Ripple	<0.5% peak to peak
Load Resistance	Current output: 0
		Voltage output: Lr>10KΩ
Measurement Accuracy
Reference IEC 60688	0.5% or 0.2% @ F.S.
Adjustment	Potentiometer "ZERO" and "SPAN"
Frequency influence	<0.02% per Hz
Load influence	<0.25% of F.S. for specific load range
Auxiliary Supply
Rating	85-265Vac/dc, Optional 12V, 24V, 48VDC
Consumption	<3VA
Galvanic isolation between I/O and AUX
Test voltage	2KV RMS 50Hz for 1 minute
impulse	4KV 1.2/50µsec waveform
Temperature requirements
Operating	-10~55C
Storage	-40~70C, 20 ~ 93%RH; Noncondensing

 

 

 

 

 

 

 

 

Application

Company Profile

Certifications

Our Service

 

FAQ