Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 1,Superior performance: Equipped with a reliable and high-torque diesel engine from the cloud internal series. Matched with a heavy-duty mining-specific gearbox with a large speed ratio range. The two-stage reduction and large speed ratio drive axle increases torque, resulting in over 30% more driving torque than comparable road vehicles. This allows for smooth starting under heavy loads, large carrying capacity, strong climbing ability, and the ability to climb slopes of up to 25° or more.
2,Strong carrying capacity: The vehicle frame is made of a closed-section box-shaped steel frame made of special steel plates, with a sturdy and reliable structure, high torsional and impact strength, and high rigidity, ensuring a long service life. The specially designed suspension system and large-diameter mining-specific tires ensure strong load-bearing capacity.
3,High loading and unloading efficiency: The bottom of the 10mm and the edges of the 5mm thick groove steel are fully welded and reinforced, forming a mining-specific U-shaped cargo box with thick materials, strong impact resistance and wear resistance. The 1.7m internal width of the cargo box is convenient for multi-directional loading by equipment such as shovels and loaders, greatly reducing loading time. Equipped with a 1100mm long-stroke three-section lifting oil cylinder and a high-flow gear pump, the lifting time is short, and unloading is convenient and fast, improving work efficiency.
4,Reliable manufacturing performance: Front and rear equipped with widened brake friction pads and dual-circuit air brakes, ensuring the possibility of sustained braking under heavy loads downhill. The spring energy storage air brake ensures the safety of the mining vehicle during braking under complex conditions.
5,Good mobility and off-road capability: The 2-axle structure has a small turning radius, flexible maneuverability, low failure rate, and high attendance rate, making it suitable for narrow mining loading and unloading sites, frequent turns, turning around, and uphill and downhill work conditions.
| Product model | MT25 |
| Driving style | Side drive /spring seat / height of seat 1300mm |
| Fuel category | diesel |
| Engine model | Yuchai210 medium cooling supercharged engine |
| Engine power | 155KW(210hp) |
| Gearbox model | 10JSD200 |
| Rear axle | Double153 Drive rear axle |
| Front axle | 300T |
| Driving type | Rear drive |
| Braking method | Automatically air-cut brake |
| Front wheel track | 2150mm |
| Medium wheel track | 2250 |
| Rear wheel track | 2280mm |
| Wheelbase | 3250mm+1300mm |
| Frame | Height 200mm * width 60mm * thickness10mm, 10mm steel plate reinforcement on both sides, with bottom beam |
| Unloading method | Rear unloading double support 130*2000mm |
| Front model | 825-20wire tire |
| Rear model | 825-20 wire tire (double tire) |
| Overall dimension | Lenght7200mm*width2280mm*height2070mm |
| Cargo box dimension | Length5500mm*width2100mm*heght950mm Channel steel cargo box |
| Cargo box plate thickness | Bottom 12mm side 6mm |
| Unloading height | 4500mm |
| Steering system | Mechanical steering |
| Leaf springs | Front leaf springs :10pieces*width75mm*thickness15mm Rear leaf springs:13pieces*width90mm*thickness16mm |
| Cargo box volume(m³) | 9.2 |
| Climbing ability | 15° |
| Load capacity /ton | 25 |
| Exhaust gas treatment method, | Exhaust gas purifier |
| Minimum turning radius | 320mm |
In order to provide you the most suitable product, please help us to answer the bellow several questions:
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
