| Certification: | CE, ISO9001 |
|---|---|
| garansi: | 1 tahun |
| material: | , |
| komponen inti: | motor, pompa |
| industri yang berlaku: | pabrik makanan & minuman, farmasi, minyak bumi |
| proses manufaktur: | bahan baja anti karat |
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit Feature
• The ultra high level of polishing, the inner surface polished to 0.3 um Ra . the outer surface to reach 0.4 um , the absolute hygienic level polishing.
• Dealing with large flow, compact design saves space.
• The design of side in bottom out ensures that the particles can be completely removed. At the same time, tangent outlet makes sewage discharged thoroughly, and workers operate easily.
• For more than 15 cartridges filter housing , the swing arm and eyebolt or quick open are optional design to operate easily. Also it is a economical and practical design.
Application
• The ultra high level of polishing, the inner surface polished to 0.3 um Ra. the outer surface to reach 0.4 um, the absolute hygienic level polishing.
• The vent valve can choose quick-open, can completely disassembled and no dead corner of cleaning.
• Small specification filter installation adjusting nut at the bottom of the Stabilizer blade, can adjust the height of the filter, easy to use.
| Operating Conditions | |
| Max. operating pressure | 0.6MPa 1.0MPa |
| Max. operating temperture | 150ºC |
| Disinfect | Online or steam sterilization: 121ºC/30min |
| Material | |
| Shell | 304, 316L |
| Vent/Drain valve | 304, 316L |
| Eyebolt | 304 |
| Stabilizer blade | 304 |
| O-ring | EPDM, PTFE Viton, Silicone |
| Connection | |
| Connection of shell | Flange(Eyebolt) |
| N1, N2 In- outlet | Tri-clamp |
| N3 Pressure gauge(option) |
1.5″Tri-clamp
|
| N4vent valve(option) |
1/2" Tri-clamp (less than 12pcs) 1.5" Tri-clamp (more than 15pcs) |
| N5 Drain valve (option) |
1/2" Tri-clamp(3R) 3/4" Tri-clamp (5pcs to12pcs) 1' Tri-clamp(more than 15pcs) |
| Cartridges connection | 222 type, 226 type |
| Surface Finish | |
| Finish type | Mechanical / electrolytic polishing, sand blasting |
| Polishing precision |
0.3um Inner surface Ra≤0.3um |
Dimension Parameters
| 3R(4R) | 5R(6R) | |||||
| 20" | 30" | 40" | 20″ | 30″ | 40″ | |
| A: Total height | 1123 | 1373 | 1623 | 1145 | 1395 | 1645 |
| B: The distance from inlet to center | 142 | 165 | ||||
| C: Shell diameter | Φ204 | Φ250 | ||||
| D1: The height from inlet to ground | 540 | 660 | ||||
| D2: The height from outlet to ground | 300 | 300 | ||||
| In-outlet N1, N2 Size | 1.5"/2" | 1.5″/2"/2.5" | ||||
| 7R | 8R | |||||
| 20" | 30" | 40" | 20" | 30" | 40" | |
| 1145 | 1395 | 1645 | 1170 | 1420 | 1670 | |
| 176.5 | 190 | |||||
| Φ273 | Φ300 | |||||
| 660 | 660 | |||||
| 300 | 300 | |||||
| 1.5″/2"/2.5" | 1.5″/2"/2.5"/3" | |||||
| 9R(10R) | 12R(11R) | |||||
| 20" | 30" | 40" | 20" | 30" | 40" | |
| 1170 | 1420 | 1670 | 1170 | 1420 | 1670 | |
| 202.5 | 215 | |||||
| Φ325 | Φ350 | |||||
| 660 | 660 | |||||
| 300 | 300 | |||||
| 1.5″/2"/2.5"/3" | 1.5″/2"/2.5"/3" | |||||
| 15R(18R) | 21R | 24R(27/30R) | 36R | 42R | 48R(54R) | |
| 40" | 40" | 40" | 40" | 40" | 40" | |
| 1947 | 1959 | 2026 | 2036 | 2044 | 2067 | |
| 240 | 265 | 290 | 315 | 340 | 365 | |
| Φ400 | Φ450 | Φ500 | Φ550 | Φ600 | Φ650 | |
| 682 | 694 | 714 | 729 | 734 | 744 | |
| 300 | 300 | |||||
| 3"/3.5"/4" | 3"/3.5"/4" | |||||
The above-mentioned data is the standard, it can customize according tocustomer's requirements.
| Qty. of Cartridges | Model of Cartridges | Cartridges connection | Shell Material | In-outlet connection | O-ring | |
| 12R | 20 | S | 4 | K | E | |
| 3R=3Pcs | 21R=21Pcs | 20=20″Cartridge | S=226Type | 4-304 | K=Tri-clamp | E=EPDM |
| 5R=5Pcs | 24R=24Pcs | 30=30″Cartridge | T=222Type | 6=316L | P=PTFE | |
| 7R=7Pcs | 36R=36Pcs | 40=40″Cartridge | V=Viton | |||
| 8R=8Pcs | 42R=42Pcs | S=Silicone | ||||
| 9R=9Pcs | 48R=48Pcs | |||||
| 12R=12Pcs | 56R=56Pcs | |||||
| 15R=15Pcs | ||||||
Q: CAN I HAVE SAMPLES TO TEST?
A: Yes, we are pleased to supply samples to test and check quality, miled sample order is available. Please note, free samples is not acceptable.
Q: DO YOU HAVE ANY MOQ LIMITED?
A: Our MOQ is 1PC to supply new customers.
Q: WHAT'S THE LEAD TIME?
A: Sample: 20-25days. Mass production: 25-30days depend on the order quantity.
Q: HOW DO YOU SHIP THE GOODS AND HOW LONG DOES IT TAKE?
A: We ususlly ship by sea. DHL, UPS, fedex TNT are also acceptable.
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
