Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit Introduce
• JTGYG Y-type Filter is a improved small tube strainer which can remove a small amount of solid particles in the liquid, also can protect compressor, pump, instruments and other equipment to work successfully.
• With reasonable design, JTGYG Y-type Filter achieves advantages of no dead corner, low resistance and easy drainage Filter adopts multiple polishing processing steps to ensure that the interface Ra reach to 0.4 um close to sanitary level. All of the surface is mirror polished.
Feature
• The filter inner and outside surface using mirror polish, interface Ra reaching to 0.4 um up to sanitary level.
• Filter housing adopts quick connection, easy to handle, economical and practical.
Application
• All kinds of liquid particle filtering.
• Edible oil, beverage, wine filtration.
• Chemical filter.
• Compressors, pumps, instrumentation and other equipment pre-filtering and protection.
| Operating Conditions | |
| Max. operating pressure | 0.6MPa 1.0MPa |
| Max. operating temperture | 150ºC |
| Material | |
| Shell | 304, 316L |
| Vent/Drain valve | 304, 316L |
| O-ring | EPDM, PTFE Viton, Silicone |
| Connection | |
| Connection of shell | Tri-clamp |
| N1, N2 In- outlet | 2"/2.5"/3" Tri-clamp |
| Surface Finish | |
| Finish type | Mechanical/electrolytic polishing, sand blasting |
| Polishing precision |
0.4um Inner surface Ra≤0.4um |
Dimension Parameters
| In-outlet | |||||
| 1" | 1.5" | 2" | 2.5" | 3" | |
| A: Total height | 185 | 240 | 300 | ||
| B: The distance from inlet to center | 220 | 275 | 325 | ||
| C: Shell diameter | Φ76 | Φ101.6 | Φ129 | ||
| E: The diameter of the filter screen | Φ50 | Φ76 | Φ100 | ||
| F: The length of the filter screen | 135 | 180 | 225 | ||
The above-mentioned data is the standard, it can customize according to customer's requirements. (Unmarked length unit is mm)
JTGLL Selection Table
| Qty. of cartridge | Shell Material | In-outlet connection | Dimension | O-ring |
| 1R | 4 | K | 20 | E |
| 1R=1 Pcs | 4-304 | F=Flange | 10=1" | E=EPDM |
| 6=316L | K=Thread | 15=1.5" | P=PTFE | |
| L=Screw thread | 20=2" | V=Viton | ||
| 25=2.5" | S=Silicone | |||
| 30=3" |
Q: CAN I HAVE SAMPLES TO TEST?
A: Yes, we are pleased to supply samples to test and check quality, miled sample order is available. Please note, free samples is not acceptable.
Q: DO YOU HAVE ANY MOQ LIMITED?
A: Our MOQ is 1PC to supply new customers.
Q: WHAT'S THE LEAD TIME?
A: Sample: 20-25days. Mass production: 25-30days depend on the order quantity.
Q: HOW DO YOU SHIP THE GOODS AND HOW LONG DOES IT TAKE?
A: We ususlly ship by sea. DHL, UPS, fedex TNT are also acceptable.
Pemasok dengan izin usaha terverifikasi
Pemasok yang Diaudit 
