GSK980tdi/GSK980tdc memutar CNC

 
GSK980TDi Bus type CNC turning control system from CNCmakers is a new product based on GSK980TDc,
and its software and hardware are upgraded,with bigger 8.4'' LCD screen and more
powerful built-in PLC which controls 5 feeding axes (including C axis), 2 analog spindles,
2ms interpolation in high speed, 0.1 μm control precision, which obviously improve the
efficiency, precision and surface quality of parts processing. New USB interface,
it supports the file operation and program running in flash disk. As the upgraded product
of GSK980TDc, GSK980TDi is the best choice of CNC lathe for the technical upgrading in economical type.Five axes of X, Z, Y, 4th and 5th control, the axial name and type of Y, 4th and 5th can be defined.2ms interpolation cycle, precision of 1μm or 0.1μm can be selected.Maximum speed 60m/min (When it is 0.1μm, the maximum speed is 24m/min). Adapted servo spindle can realize spindle continuous position, rigid tapping, rigid screw processingBuilt-in many PLC programs, the current running PLC program can be selectedG71 command supports the cycle cutting of groove shape outline Support the programming of macro command in sentence type and the calling of macro program with parameter. Support programming in metric system/inch system, with function of auto tool-setting, auto chamfering, tool life management. Display in Chinese, English, Spanish or Russian, which is selected by parameter. With USB interface, it supports file operation in flash disk, system configuration and software upgrade. Analog voltage output of 0V~10V in two channels, support double spindlesElectrical MPG input in one channel, it supports hand electrical MPG.Common input in 40 points/common output in 32 points Overall installation dimension and the command system are completely compatible with GSK980TDc
 Number of control axes

Number of control axes: five axes (X, Z, Y, 4th and 5th )Number of linkage axes: three axes Number of PLC control axes: four axes

Feeding axes function

Minimum command unit: 0.001mm or 0.0001mm is selectablePosition command range: ±99999999 × minimum command unit24m/min Rapid traverse speed: When the command unit is

0.001mm, the maximum speed is 60m/min; 0.0001mm, the
maximum speed is 24m/min.

Rapid override: Total four levels: F0, 25%, 50% and 100%,

real-time adjusting

Feeding override: Total 16 levels: 0~150%, real-time adjusting Interpolation mode: Interpolation of linear, arc (support arc

interpolation of three points), thread, ellipse and parabola and rigid tapping.

Auto chamferingThread
Common thread (follow the spindle)/rigid thread Single-headed/multiple thread of straight, taper and terminal surface

in metric system/inch system, equal and variable pitch thread

Thread retraction length, angle and speed characteristics can be set Thread pitch: 0.01mm~500mm or 0.06 tooth/inch~25,400 tooth/inch Acceleration and deceleration function
Cutting feeding: Linear type or index type is selectable. Rapid traverse: Linear type or S typeThread cutting: Linear type or index type is selectable. The starting speed, finishing speed and time of acceleration and

deceleration are set by the parameter. Spindle function

Analog voltage 0V~10V output in two channels, support

two-spindle control.

Spindle encoder feedback in one channel, the resolution

of spindle encoder can be set(100p/r~5000p/r).

The transmission ratio between encoder and spindle is: 1~255):(1~255)Spindle speed: It is set by S code or PLC signal, the speed

range is 0rpm~9999rpm.

Spindle override: Total 8 levels: 50%~120%, real-time adjusting Spindle constant surface speed control  Rigid tapping Tool function
Tool length compensation Tool nose radius compensation (C type) Tool wearing compensation Tool life management Method of setting tools: Tool-setting in fixed position, trial cutting

tool-setting, return to reference point, auto tool-setting

Tool offset executing mode: Rewriting coordinate mode, tool

traverse mode Precision compensation

Backlash compensation Pitch error compensation in memory type

PLC function

PLC program in two levels, maximum 5,000 steps, the refresh

cycle of the 1st level program: 8ms

PLC program communication download Support PLC warning and PLC alarmSupport many PLC programs (maximum 16), the current

running PLC program can be selected

Basic I/O: input in 40 points/output in 32 pointsMan-machine interface
7.4″large screen LCD, the resolution is 234×480Display in Chinese, English, Spanish or Russian, etcDisplay in two-dimensional tool path Real-time clock
Operation management
Operation mode: Edit, auto, MDI, mechanical zero return,

MPG/single step, manual, program zero-return

Operation authority of multiple-level managementAlarm record Editing program
Program capacity: 25M, 10,000 programs (including

subprograms, macro programs)

Editing function: program/block/characters research,

rewriting and deleting

Program format: ISO code, support macro command

programming in sentence type, programming of relative
coordinate, absolute coordinate and hybrid coordinate.

Calling program: Support macro program with parameter,

subprogram nesting of 4 layers.

Community function RS232: Files of part program and parameter, etc can be

transmitted in two-way, support PLC program, serial ports of
software upgrade.

USB: File operation and file directly processing in flash

disk, support PLC programs, flash disk of software upgrade. Safety function

Emergency stop Hardware travel limitSoftware travel limitData restoring and recovering