Informasi dasar.
Tidak. Model.
Can be customized
Warranty
1 Year After Shipped on Board
Shaping Mode
Injection Mould
Surface Finish Process
The Surface Can Be Customized
Mould Cavity
Single Cavity or Multi Cavity
Plastic Material
Any Plastic Material, Customized
Process Combination Type
Compound Die
Application
Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware, All Plastic Parts Relating
Runner
Cold or Hot Runner, According to Part Construction
Design Software
Step, STP
Certification
TS16949, ISO
After-sales Service
1 Year Guarantee
Usage
According to Design
Name
Make Plastic Injection Mould
Mould Material
Can Be Customized
Keyword
Plastic Injection Mold
Merek Dagang
Cents or Customized
Deskripsi Produk
Product Description
Product Name: Plastic Injection Mould Capsule Mold OEM Custom Plastic Intake Pipe Bracket Injection Mould
1. General information for intake pipe bracket:
The intake pipe bracket is an important accessory in a car engine.
The dimension of the intake pipe bracket is 270.00 mm x 242.50 mm x 118.00 mm,
The thicknessis:2.65 mm,
Material: PP-T40, the shrinkage
Product Parameters
2. Technical analise for mold design:
The size of the plastic parts is large, coupled with the inclined slider core pulling in two directions, so the mold is bulky, the mold cavity 1*1, and the mold base is a standard mold base DCH6570 A200 B130 C195 GP500 EGP ∅30( 4X).
The positions of the two oblique core-pulling sliders are staggered. In the process of mold clamping and mold opening, the two sliders need to move in sequence. Therefore, the two inclined sliders are controlled by oil cylinders. The inclined surface of the slider is locked with A plate, and a wear-resistant plate is designed on the inclined surface. The inclined guide rails at the bottom of the slider are all inlaid design. The fixing method of the oil cylinder needs to be paid attention to. The piston rod of the oil cylinder cannot be screwed directly on the slider seat. The correct way is to screw the piston on the joint, and then clamp the joint in the T-slot of the slider seat.
The gating system adopts the glue feeding method of turning from a pin gate to subgate.
The ejection of plastic parts adopts inclined ejector and ejector pin ejection.
The cavity and core are designed for cooling in the pool. The slider is designed with a water-carrying circuit with direct water-carrying cooling to ensure effective injection molding.
OUR ADVANTAGE: WE WILL BOTH CONSIDER TO SAVE MOLD COST AND PRODUCT COST, SO YOUR INFORMATION IS VERY IMPORTANT FOR US.
Cavity material | Nak80, S136 or other |
Mold base material | C50 or other |
Gate | Subgate, Pin gate... according to product design |
Shot time | 10-120seconds according to product design, mold design |
Runner | Cold or hot runner |
Mold life | At least 300000 shots. |
Product material | Abs, PC, ABS+PC, PP, POM, Pa66, PE..... |
Mold delivery time | 25-50 days |
Certifications
Our factory has been certified by ISO association adn NAQ16949 for Auto parts
Company Profile
Cents is a factory with 20 years of experience in mold making and injection molding. Currently, the company and its factory covers an area of 13,000 square meters and has around 200 workers. Among them, 26 are design engineers and structural engineers. We have a complete mold production workshop, injection workshop, dust-free injection workshop, inspection room, warehouse, and assembly workshop. We have advanced EDM and WEDM mold production equipment imported from Japan. We have 46 injection molding machines, 19 of which are Japanese Sodick brand, in order to produce high-precision plastic products. Our products are widely used in the new energy automobile industry, medical industry, mechanical and machinery industry, home appliance industry and beauty industry. Among them, we are very professional and have rich experience in the production of negative pressure cups, tapping thread products and transparent acrylic products.
In 2019, we started to carry out the IMD/IML process and established an IMD/IML product production workshop, specifically for some customers who have very high requirements for product appearance and process.
Our factory has always adopted ISO 9001 as its operating principle. In terms of auto parts products, we have been certified by the 16949 organization and issued a 16949 certificate.
Our company only focuses on ODM/OEM design and production. Therefore, to provide customers with the best quality design, production and service is our company's core value requirements;
Our Advantages
***More than 40 sets injection machines;
***More than 20 engineers and 200 workers;
***One-stop service in making mold and molding;
***Anti-dust workshop for IMD/IML molded parts;
***Assembly line available for some finished parts;
***Most advanced equipment for EDM & WEDM, Sodick brand injection machine
Our Main Products
Customer Comments
Alamat:
Room 301, No. 1, Zhenglongyi Road, Chang′an Town, Dongguan, Guangdong, China
Jenis Usaha:
Produsen/Pabrik
Jangkauan Bisnis:
Elektronik Konsumen, Layanan, Mesin Manufaktur & Pemrosesan, Mobil, Suku Cadang Motor & Aksesoris, Perkakas & Hardware, Perlengkapan Industri & Komponen
Sertifikasi Sistem Manajemen:
ISO 9001, ISO 14001, IATF16949
Pengenalan Perusahaan:
Sen adalah sebuah pabrik dengan pengalaman selama bertahun-tahun di tengah pembuatan cetakan dan molding injeksi. Saat ini Perseroan dan pabriknya mencakup luas 13 meter 000 persegi dan memiliki sekitar 200 pekerja. Diantaranya, 26 adalah insinyur desain dan insinyur struktural. Kami memiliki bengkel produksi mold lengkap, bengkel injeksi, bengkel injeksi bebas debu, ruang pemeriksaan, gudang, dan lokakarya perakitan. Kami telah menyalurkan bahan produksi ke EDM dan WEDGE M yang diimpor dari Jepang. Kita memiliki 19 mesin molding injeksi, 46 diantaranya adalah merek Japanese soda, dalam rangka menghasilkan produk plastik presisi tinggi. Produk kami banyak digunakan dalam industri mobil energi baru, industri medis, industri mekanis dan alat berat, industri peralatan rumah tangga dan industri kecantikan. Beberapa diantaranya, kami sangat profesional dan berpengalaman dalam produksi cangkir-cangkir tekanan negatif, bahan ini membuka bahan benang dan produk-produk akrilik yang transparan.
Pada tahun 2019, kami mulai melakukan proses IMD/IML dan mendirikan sebuah workshop produksi produk IMD/IML, terutama untuk beberapa pelanggan yang sangat membutuhkan pelayanan yang sangat prima dalam hal penampilan dan proses produk.
Pabrik kami selalu menerapkan ISO 9001 sebagai prinsip pengoperasiannya. Dalam hal produk suku cadang otomatis, kami telah disertifikasi oleh organisasi 16949 dan mengeluarkan sertifikat 16949.
Perusahaan kami hanya berfokus pada desain dan produksi ODM/OEM. Oleh karena itu, untuk memberikan desain, produksi, dan pelayanan yang berkualitas kepada pelanggan merupakan kebutuhan utama perusahaan kita